Having problems with your Sony Cyber-shot DSC-W50 Digital Camera ?

When I turn my camera on the display screen is darkened. I can hardly see what I am taking a picture of. I can barely see the pictures saved and I cannot see the menu options to see if there is anything I can do to change the settings. What can I do? Is this fixable? I own the Sony Cybershot DSC-W55.


Answers :

Dear Member!\012
\012The screen back-light or inverter has gone,usually this is a guarantee issue,so if you take this to one of the services they has to repair for free.\012You can open an check the screen cable connections,if they are OK ,or try resolder if necessary,but most likely is the inverter which is not user repairable,so must to be taken to the service.If there is no sign of impact or other damage and the camera is in warranty they has to repair it for free.\012Good luck!\012Regards!
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W50 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I turn my camera on the display screen is darkened. I can hardly see what I am taking a picture of. I can barely see the pictures saved and I cannot see the menu options to see if there is anything I can do to change the settings. What can I do? Is this fixable? I own the Sony Cybershot DSC-W55.


Dear Member!\012\012The screen back-light or inverter has gone,usually this is a guarantee issue,so if you take this to one of the services they has to repair for free.\012You can open an check the screen cable connections,if they are OK ,or t ... Sony Cyber-shot DSC-W50 Digital Camera

Megxon c480 I have a megxon c480 and the optical zoom is stuck out. You can hear it trying to retract but the caption that comes out is that it has failed. You can not see anything through the lense either. Accept when you change the mode to setting and you can veiw setting option. What is this going to cost me to fix?


I hit mine with a hammer It works well again now. ... Digital Cameras

My viewfinder went dark on me while taking pictures last night. The camera still takes pictures fine, but I can not see anything in the viewfinder. I see an 1842 on the screen when I first turn on the camera. Did a setting get changed when I swapped out the battery?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot SD1000 Digital Camera

My viewfinder went dark on me while taking pictures last night. The camera still takes pictures fine, but I can not see anything in the viewfinder. I see an 1842 on the screen when I first turn on the camera. Did a setting get changed when I swapped out the battery?


Have you tried pressing the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP b ... Canon PowerShot SD1000 Digital Camera

I have a fujiflim s5000 i have had it for years and have never had a problem. i did not change anything on the settings and all of the sudden the pictures are bright and u can not see anything... i have adjusted the white balance the flash and the exposure but nothing will help this.


Your CCD chip is gone.repair possible if one could find a new one.Fuji isnot given them away. ... Fuji FinePix S5000 Digital Camera

With my cano powershot sd960 is i cannot seem to adjust the ISO speed. when in the portrait, kids/pets, settings i press the funct set button to get my list of different options . i can see "ISO Auto" on the list, but i can't seem select it to change it.


When using the programmed modes, like portrait, kids, etc. you cannot set the ISO speed manually. The reason for this is because in those modes you are asking the camera "can you please set ideal settings (ISO, shutter speed, aperture, e ... Canon PowerShot SD960 IS Digital Camera

Low Light! Whenever I turn my camera on to take a picture, the screen displays "Low Light!" and I can barely see anything on the screen. How can I change the settings so that I can see the picture I want to take on the display screen??


Go to "Menu">"Settings" then it should be there. ... Samsung Digimax 240 Digital Camera

I purchased a Sanyo 12.1 mp camera with 3x optical zoom less than a month ago and for some reason it will not focus on anything. The screen shows everything as a big blur. I have checked the lense to see if there was a possible smudge on it but there isnt and none of the camera settings have been changed. It is also making sounds like it is trying to focus but cannot. Is there any way to possibly fix this?


... Sanyo VPCE1090 Digital Camera

My computer is not recognizing my new canon sx130is. Is it the ?USB Interface Cable ?Or, is there a setting in the camera that I need to change? I read the manual over and over again and i don't see anything. Thanks,


Having gone over three months without a response, I assume my suggestion to use a card reader solved the problem. ... Canon PowerShot SX10 IS Digital Camera

No sound... I can't figure out why there is no sound on the videoclips we have recorded. I've looked in the manual to see if there is a setting that needs to be changed, but can't find anything. I'm starting to wonder if the camera was broken when we got it...help!!!!


There is no sound on the clips because the camera does not have a speaker, if/when you transfer the video to the PC you will hear sound ... Vivitar ViviCam 5100 Digital Camera

The view finder or screen are black. The lens moves out when the camera is powered on, I can hear the shutter click when pushed; the telephoto is moving; I have all the settings show on the screen when the camera is powered on but I cannot see anything through the view finder or on the screen and no image is captured when a pic is taken. I changed the batteries and it made no difference.


I know it may sound like the shutter is moving, but you're going to have to actually look down the lens barrel to confirm it's actually moving, and not just producing a sound effect from the camera. Also keep in mind Canon's SX IS series cameras are ... Canon PowerShot S3 IS Digital Camera

Sony cybershot dsc w320. A gift from my cousin in japan. I cant change language from japanese to english. I tried the menu then the language. I dont see any other options for language. Well, Im not really sure if its the language setting since I dont understand it. Please help. I referred to http://pdf.crse.com/manuals/4166049121.pdf but no a help.


Press the Menu button, the one the top left of the control panel.\012Look for an icon shaped like a tool box, and press the central button on the control panel.\012Select the category that has an icon that looks like a hammer, that's the Main Setting ... Digital Cameras

Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's


The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?


... Nikon D3000 Digital Camera

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

Reset option and clean sensor option are not visible in set up menu. Canon D20 I had a two spots that kept appearing in the same area of the photo so I looked at the manual and did the clean sensor function a couple of times and the spots remain. I had also done a reset all functions since my stepson gave me the camera and I wanted to restore it to its original settings. Now I don't see either the clean sensor option or the reset in the set up menu. Help!


First of all - great camera! Check out http://www.dpreview.com/reviews/canoneos20d/ for a lot more information on the functionality. The sensor clean functio ... Canon Digital Cameras

I have the G9 it's 3 years old. On the weekend for the first time I went to spin the wheel to change my scan setting from flora to mountain and it wouldn't change the setting. I tried to use the mannual appeture by using the wheel and it didn't do anything. So it seems the wheel doesn't work anymore. I use it all the time for underwater settings in the housing. Now I can't use it at all underwater. because I can't get it onto the underwater setting using the wheel. What is wrong can the wheel b


... Canon PowerShot G9 Digital Camera

Black screen when turn on camera, cant see anything. reset settings, can see old images on card, but cannot take pic, cannot see anything on back window. Its black, but shutter is open.


Try pushing the DISP button; otherwise, canon.com says it needs svc. ... Canon PowerShot SD550 / IXUS 750 Digital Camera

I have a Sony cybershot DSC-W200 12.1 megapixels. It has been working brilliantly, then i turned it on one day and it will not allow me to change any of its settings, even in the manual setting. In auto i can not use flash or micro settings. What has happened and how can i change it back? I have searched through all of its menues and i cant find anything that helps.


Take out the battery and let sit for 10 minutes. reinstall battery and turn back on. everything should be back to normal ... Sony Cybershot DSC-T200 Digital Camera

Why is my olympus e420 taking green tinted photos? I bought a new camera which I received yesterday, and it was until earlier, but has suddenly started taking yellowy/greeny tinted images. I've tried changing the settings, I've changed the camera modes, I reset the settings altogether and even changed lenses and yet the camera still takes tinted pictures, inside and outside. Also, when I switch the camera to live-view mode (shows exactly what the lens sees) it shows pretty much an entire green s


Im having this same problem. I have yet gotten it solved.. have you fixed it yet? ... Olympus E-420 Digital Camera

How do I change the default setting on my sony DSC-T90 digital camera,so that the default language of japanese changes to english? the camera buy it to japan. Everytime i go to language setting, i dont see any english to transfer it! is there any solution to it? thanks


Here is the user manual for your camera. Please read it you will the language settingshttp://www.docs.sony.com/release/DSCT20_EN_ES.pdf ... Digital Cameras

My finepix z fujifilm camera has burst the ink in the screen so i can't see what picture I am taking - photos are coming out great on computer but now i have accidentally changed the setting to black and white and as i can't see the screen don't know how to change it back to colour - how many times do ihave to press menu - up - down - left - right etc


You can replace the LCD they are 24 dollars on ebay and come with instructions which is a link to you tube video all you have to do is take off back of camera and plug in new LCD not to hard get the kit with the tools you will need a tri- blade screw ... Fuji Finepix Z20fd Digital Camera

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help


As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

Coolpix s8000 digital camera: Unable to get red-eye button whn pressing flash mode as per page 31, only 2 options i.e. flash auto and no flash. ISO - unable to change the iso function. Set at manual. Also, unable to change to black and white option. Please help. [email protected]


Dear Friend,\015\012\015\012All the functions are not available on each and every mode. So first ensure that you have selected right function and compatible mode.... but from your question it seems that your cam is not acting as per manual... T ... Nikon Digital Cameras

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1584 seconds