Having problems with your Sony Cyber-shot DSC-W50 Digital Camera ?


Answers :

Turn it on
\015\012take hold of the end of the lense and gently pull and twist you may hear it click but do not force it, then turn it off and on again and the problem may be solved
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W50 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :


Turn it on \015\012take hold of the end of the lense and gently pull and twist you may hear it click but do not force it, then turn it off and on again and the problem may be solved ... Sony Cyber-shot DSC-W50 Digital Camera

When I turn on the camera the word access appears. I can't take a picture or see the pic that are on the camera. It makes a clicking sound and asks me to turn the camera on and off. Then it repeats as above.

Lens barrel must be stuck , repair it or replace ... Sony Cyber-Shot DSC-S40 Digital Camera

When i turn on power the word "ACCESS" appears on the screen for 5 seconds. then the words, turn the power off and on again, appear with a beep and a flashing orange light near the view finder. I can look through the dsaved pictures and use the menu functions, but cannot take new pictures.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Sony Cyber-shot DSC-W50 Digital Camera

When i take a picture it works fine..but then i try and take another picture and it appears the whole functions of the camera is locked up..cant do anything..however the screen still shows a image.. to take another picture i need to turn off and turn on the camera again and then it will only allow me to take one picture then i have to turn it off and on again.. please help with this problem...im sure its something simple but it is very frustrating thank you

Firstable go on to your camera settings try looking around for the problem if this does not work get it repaired hope you have warrenty if you don't itll be a little expensive so goodluck:) and please rate this solution...\015\012But if this do ... Digital Cameras

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?

Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

Turn the power off and on again....this is what appeared after i download some pictures to my computer for the first time. When I do this the same words appear on the screen and I am unable to take any pictures When I turn on my Cybershot DCS W90, A message sayes 'turn the power off and on again' the lens does not open and I can't take photos but can see photos stored on memory card.... what do I need to do to fix this?

I have a Sony P32. Found the answer on another board'\015\012Hit the front of the camera where the lens is on carpet a couple of times. I jars the problem loose ... Sony Cyber-shot DSC-W100 Digital Camera

I just recently bought a Polaroid t1234 from walmart and ive only had it for 2 weeks. When i turn the camera on the screen turns pink or has pink lines running across the screen. When the camera is like this it wont take any pictures, if i do the pictures turn out pink just like the screen. I dont have the receipt and so i cant take it back but i want to know what is wrong with it or how much it will be to get it fixed.

The CCD image sensor chip is faulty, take it back for replacement. You do not need a receipt, If you paid by debit/credit card, use your paper statement as proof of purchase ... Digital Cameras

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.

... Digital Cameras

Getting access I turn the camera on, then the word access appears on the screen, then it says to turn the camera off and on again. it keeps repeating this each time you turn the camera on. How do I get pass this and be able to use the camera???

Gently hold the lens when you first turn it on to prevent it from going back in the camera. That worked for me. ... Sony Cyber-shot DSC-W30 Digital Camera

When i switch on my camera the word access appears on the screen ,i cannot take any pictures?

When i switch on mycamerathe word err_code:zl0020 appears on the screen and gets turn off ... Digital Cameras

Hi, I have a Panasonc Lumix DMC TZ2 digital camera. When i turn it on the screen is just black, and when I take a photo the picture is just black. However, there appears to be nothing wrong with the LCD screen as I can view previously taken photos fine. Can you help, Thanks Donna

Sounds like you lost the connection to the sensor. ... Panasonic Lumix DMC-TZ2 Digital Camera

My olympus E500 camera goes automatic on the usb connected mode !. Last evening i take pictures and at some time i cant make pictures , the screen of the usb modus comes up (no usb cable connected !) when i selected one and pres ''ok '' >nothing. turn of the camera a several times > it didnt help. this morning i start up the camera again , i take one picture and the usb screen comes up again . Whats wrong here ?

Dons't really know but did you try a reset? ... Olympus Digital Cameras

Picture error I have a problem with my Olympus SP 500UZ. When I take a couple of pictures on one day. Shut the camera down and start it later on to take new pictures. The screen turns blue when I want to see the pictures. It gives the message: Picture Error or Fatal error and every photo on the memory card is gone! I send it to the Olympus repair for three times now, but they tell me every time that there's nothing wrong with the camera. Is this a known problem??

... Digital Cameras

Purple Pictures When in the camera mode my mvc-fd73 appears all purple, the pictures also turn out this way. I was outside taking pictures and noticed the screen color go nutz a couple of times. Came inside to take a few pictures and found the camera in this purple almost a solorized effect. The Screen looks fine in the play mode. I've tried a freshly charged battery and a fresh disk, but it made no difference.

This is a CCD sensor problem and should be replaced. Try to have it done free of charge by Sony even though your camera is an old model because CCD sensor should last 10 years +. ... Sony Mavica MVC-FD73 Digital Camera

Bought a digital camera two weeks ago, FE3000 Olympus. Cant take a picture without horizontal lines appearing on my LCD.only 20% of the pictures I take are without these lines. When I use the video, its is perfect. Still images however are difficult to appreciate. I bought camera for daughter because I thought it was a point and shoot camera. Even in iauto mode I seldom get a perfect shot. What is wrong???????Please help me. I am willing to pay 9.95 if you can help me fix my camera. Again its an

The lines on the pictures are most likely caused by a ccd sensor problem, its the sensor that actually takes the picture.The issue could be the lcd display failing but since the lines come to the pictures that you get from th ... Digital Cameras

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.

This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.

Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

I am traveling through Brazil with my Nikon Coolpix S220. I had it in a ziploc bag in my sports bra. I took it out and started to look at photos when the screen turned white with gray lines. I continued to take pictures w/out the screen working and uploaded them. They appeared fine. The next day when I turned the camera on, the screen was still white and now the on button started to flash. It would not take any pictures. Now it won't even turn on. Is there anything I can do? I am traveling for t

Hi there, some how the the screen pressed and the LCD get damaged.\015\012After that you use is continue. You are lucky because camera does not sense the damaged parts. But now your camera memory detect the LCD is damaged & stop working. Th ... Nikon Digital Cameras

I have a brand new G12 and have used it for the past 10 days. I loved it until it would no longer take pictures. This is the problem: I turn on the camera and the display screen is black. I take a picture and nothing appears. However, I have no problem viewing previous pictures taken before this issue. Can you please help....I really want to love the camera, but I should not be frustrated after 10 days. THANKS

That's usually the CCD Sensor. If you can take it back to the store since you just bought it, do that and exchange the camera. If they won't help you, get the original receipt and the warranty information and get it to Canon, it should be covered ... Canon G12 Digital Camera

When i was using the rechargeable batteries my camera worked fine but i lost them so i reverted to use duracell aa batteries and now my camera only turns on for me to see all the pictures stored on it.. i cant even take a picture. can u tell me wats wrong because i thought all camera take any aa batteries

Greetings - You're absolutely right - Your camera should work with any rechargeable or alkaline AA batteries.\015\012\015\012\015\012Have you tried using a second set of batteries besides the first and are they new batteries or batteries ... Fuji FinePix A820 Digital Camera

When i turn the camera to take a photo, no image appears in the LCD or the eyepiece. this just happened all the sudden. I am able to view pictures that I've already taken in the LCD and the LCD will also give me the menus, picture count, everything that you would expect to see except the image that you want to take a picture of. i tried to take a picture, but the screen was just black as well. any and all help will be appreciated! thanks, mark

Just this week-end, i experienced something similar with my s5000. the playback function works correctly, however when you switch to'shoot' mode, the lens does not extend & there is no image on the screen. could this be a damaged CCD as well, or poss ... Fuji FinePix S5000 Digital Camera

When I turn the camera on, the screen displays the last picture taken. I can take a picture but there is nothing shown in the viewing screen before I take the picture, so I don't really know what it is I am taking a picture of. The menu screens come up when pressed but nothing else appears to help. I have a PowerShot A720 IS.Thanks for your help. Sincerely, Barton G. Stone [email protected]

Hi,This\015\012 is a common problem on this set. This is either due to faulty CCD \015\012sensor or faulty LCD screen. Look at the previous recorded images or \015\012videos. If you see the same white lines in previous saved images ... Canon Digital Cameras

When trying to take a picture, the screen says"please turn camera off and then on again" the camera will not fully close. and the message appeares again . I can't take a picture

The message usually appears when force has been applied to the lens. You probably need service. ... Panasonic DMC-TZ5 Digital Camera

Lens problem? Same Problem - When i turn the camera on, its just black. when i take a picture, its black. and when i try to look at those pictures i took on the computer, it's still black. i can see past images fine. but one day when i turned the camera on, it was just black. is somethign wrong with the lens? what do i do.-

Hi, its a lance flap problem, so please replace the flap and find magic. if you are a technition then open the camera and remove the lance assembally and remove the motor too. now open the lance and the flap is in the middle of the ... Sony Cyber-Shot DSC-S40 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho

I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6025 seconds