Having problems with your Sony Cyber-shot DSC-W55 Digital Camera ?

When powered on, the screen displays "Access". The scroll menu displays fine, and when a new option is selected the message will occasionally change to "Turn power off and on again".


Answers :

If the unit is out of warranty then there are several diy fixes that may work. Note though that anything is possible and more damage is possible to be done when trying this method, obviously the ideal way is to have it serviced by a professional but for that kind of money you can replace the camera. Visit this link and try the different steps. One involves pulling on the lens when it's extracted. There are also some other fixes listed and a link to where you can download the service manual itself.
http://www.fixya.com/support/t227886-sony_cybershot_dsc_w55_access_problem
Thank you and good luck,
Lee
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W55 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When powered on, the screen displays "Access". The scroll menu displays fine, and when a new option is selected the message will occasionally change to "Turn power off and on again".


If the unit is out of warranty then there are several diy fixes that may work. Note though that anything is possible and more damage is possible to be done when trying this method, obviously the ideal way is to have it serviced by a professional but ... Sony Cyber-shot DSC-W55 Digital Camera

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please


Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera

When switched on, the screen goes straight to CARD SETUP highlighting POWER OFF, with the option FORMAT.If FORMAT is selected, a CARD ERROR screen is displayed, after the CAUTION ERASING ALL message. The only option left is to switch off the camera.


This normally means that you have a faulty xD memory card.With the power off, remove the card and try cleaning the contacts using a cotton bud (Q-Tip) moistened with a little rubbing alcohol. This is unlikely to solve your problem but cos ... Olympus SP-510 UZ Digital Camera

Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i


Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I selected open folder to view pictures. The f: file display DCIM. I clicked it and it display Olympus displaying pics. I name a couple of pics in the slide. I wanted to change the folder name I went hit delete. I turned the camera off and then turned it back on. I turned camera back on thinking (how dumb) I restart process again. DCIM displayed. I renamed it "Digital Camera". It display Olympus. I clicked on Olympus renamed Holiday 2009. Then clicked on it - it says this


It sounds like you deleted the images. If you are downloading images from your camera or card....you should open the folder to view images. hold control key down and select all images that you want to download. right click on them on click save. ... Olympus D-595 Zoom Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

When I recently turned on my camera (D-630 Zoom) to take a picture, I got the message titled Card Setup, with two options "Power off" and "Format". I turned the camera off, took out the memory card (1GB) and put it back in, as I did the last (and only) time this happened, about two years ago. But it has not worked, and I have been getting this message with the two options for a few days. Any ideas? Thank you.


If this exact card has worked in the camera before, chances are it has gone bad. Typically, if the camera says to format the card it is because it does not recognize the card. The only reason this would happen is if the card is unreadable from malfun ... Olympus D-630 Zoom Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho


I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

When i turn my camera on it displays an error message "turn the power off and on again" when i turn it off and back on - it shows the same message


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

When power is turned on the card setup screen pops up. The only 2 options are to power off or format. If I select format, the pictures will be erased if yes is selected.


Memory card seems imbalanced due to some reason and can only be corrected by formatting as advised in camera pop up.Of course all picture files will be deleted if card is formatted. Try to put card in card reader and back up files in computer. ... Olympus FE-230 Digital Camera

Everytime I turn camera on it displays a message of turn power off and back on. Can you help me I have taken battery out, and put back in, but still shows the same message.


CCD FAILURE call Sony for FREE REPAIRS ask them abt BAD CCDpls rate me well ... Sony Cyber-shot DSC-W80 Digital Camera

I have sony handy camera model no DCR-SR68 the problem is when it power on the message shown on display is ::"" OVERHEATED. CANNOT ACCESS MEDIA TURN OFF POWER AND LEAVE FOR A WHILE IN A COOL PLACE"" this message comes permanently


... Digital Cameras

Lens error My Casio ex-z60 camara lens wont fully extend.When power is turned on, a clicking noise is heard. The LCD displays what will be captured, but is is blury. Then the lens closes and a "lens error" message apears on the LCD. Sometimes a message that says "retry power on" appears. Every thing else works fine. I am able to view my pictures .but I can not take any pictures.. Thank you


This is the lens focus gears. They are either knocked out of alignment, or debris has jammed them. The good news is it can be fixed....Casio most likely won't help. Hint...google my user name. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

When power is turned on the zoom lense moves in and out on its own for a couple of seconds then stops. Camera remains on (battery is charged) The message changes from "access" to "turn the power off and on again." When that is done the same process happens again. Photos can be retrieved that are in the memory to view but the problem is getting to the starting screen in order to take a picture. What's up with that? Hope you can help!


This could be dust or lint or sand that has worked it's way into the lens assembly, and is keeping the lens from initializing. Often, you can take compressed air and blow it into the front lens assembly, to try to free up the small gears there. H ... Sony Cyber-shot DSC-W55 Digital Camera

After uploading pictures from my camera to my pc yesterday, the zoom lens will no longer retract into the camera. I do get a message on the screen of the camera that says turn the power off and on again. I have tried everything, and still no luck. I have plugged it back into the pc, I have charged it, and have turned the power on and off at all options, and it still will not retract.


I believe its a sony cam. this generally happens if you have dropped it. when the message comes. try tapping the camera. if it works then you are lucky. if not then you have to change the lens array. it costs about 60$ ... Sony Digital Cameras

Panasonic Lumix DMC-Z20 took a knock, now lens gets stuck during power on, grinding noise and lens chugs back and forth for a few seconds. screen displays message "please turn power off and on again". the servo obviously still has power but it seems some part of the mechanism is struggling. any ideas/instructions on how i can crack the thing open without causing irreparable damage? (and should i try...) cheers, Ben. 0405124646 [email protected]


... Digital Cameras

We have a Sony Cybershot DSC-W1. When we turn the camera on it fails to start properly. The lens moves a little, it beeps 18 times and then displays "Turn the power off and on again". We have tried changing the batteries, but it has made no difference. When we turn it off it moves the lens, but does not bring it fully back. Any tips appreciated.


Goto http://www.digitalcamrepair.com/self_diagnosis_page.htmfor self diagnosis.please let me help you before leaving a bad feed back. ... Digital Cameras

Battery Problem My 18-month-old Canon A70 is giving "change the battery pack" message and turning off constantly, even though I have fully charged three different sets of new rechargeable batteries and rotate them as soon as the message comes on. Sometimes with this message I pull out one charged set and put the same back in, and it works fine for quite awhile, then repeats later. I imagine this is a problem in the camera battery power circuit or something. Never happens when plugged into the co


I figured out the problem. My AA battery recharger was not making good contact, so although it said the batteries were recharged, this was not the case. After fixing this and getting full recharges, the problem went away. ... Canon PowerShot A70 Digital Camera

Lens malfunction when i turn on my camera on the display screen it's says to turn the power off and then back on again. and i do this several times and it never changes. also the lens will not open and it makes a constant buzzing sound.


Hello,\015\012you are right. Actually there is some problem with lens assy.. When you turn on the camera the processor of camera start to check whole camera including mechanism. when it find something abnormal,it will not let to turn on the camera. T ... Sony Cyber-Shot DSC-P92 Digital Camera

I change out the batteries between the rechargeable ones it came with and double A's. I can get it to read the internal memory if I use the cord and connect it to my computer and select reformat. Even if it tells me that it is protected. The lens will not close even after you turn the power off or if you go to review. I tried different memory, changed batteries and read about trouble shooting. It worked perfectly before.


... Sony Cyber-Shot DSC-S90 Digital Camera

Error message When camera turned on, I get "Turn the power off and on again"with a beeping sound. I am unable to take any photographs. I've tried changing the memory card and insetting a different formatted card but the same outcome as above. Please assist? Many thanks. Nigel


I used some compressed air to blow around the camera lens opening. I think there must have been some dust there during our trip across the Simpson Desert which was the problem. ... Sony Cyber-Shot DSC-T3 Digital Camera

Sony cyber-shotdsc-w50 lense won,t retract when switching power off. when switching on screen message displays turn power off and on again


You must reset the lens this means taking the camera apart and reseting the lens.call 423-790-1480 and I'll explain whats envolved. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3282 seconds