Having problems with your Sony Cyber-shot DSC-W55 Digital Camera ?

My PC (running Windows XP) will not recognise my Sony DSC-S930 as hardware - it says that the class installer has denied the requester to install or upgrade this device - any ideas ? Thanks


Answers :

You need to look for the up-dated drivers off the camaras web page windows all ways try playing the smart one evert time they do a new copy of windows any thing older that a fuw yearas wont work with xp! its just another con by microsoft!!
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W55 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My PC (running Windows XP) will not recognise my Sony DSC-S930 as hardware - it says that the class installer has denied the requester to install or upgrade this device - any ideas ? Thanks


You need to look for the up-dated drivers off the camaras web page windows all ways try playing the smart one evert time they do a new copy of windows any thing older that a fuw yearas wont work with xp! its just another con by microsoft!! ... Sony Cyber-shot DSC-W55 Digital Camera

Despite installing software on computer.when i connect the camera with the usb cable it comes up as unknown device. have tried reinstalling driver but no joy. have installed camera previously on another computer with no problems to start with then started to not recognise device on first computer. any ideas?


The pros never use the camera....they always use a separate card reader. You should too. ... Samsung Digimax V800 Digital Camera

My computer (Vista 32-bit) does not recognize my Canon Eos Xs now. It did last week. I looked it up on Control Panel/System/Devices and I see this message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." Windows checked for a driver upgrade and reported that what is installed is the latest softw


Sounds like you may have some corruption beginning on your hard disk - try running CHKDSK /F from an administratively-enabled command prompt. It will prompt you to reboot, then it will run a consistency check on the disk and its filesystem upon boot ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I have a Canon Powershot SD600 that downloaded images flawlessly into Photoshop CS on a Window 2000 operating system. Since I have switched to Windows XP I have had nothing but problems. I have the camera driver installed, Photoshop is importing the device, but when selecting the image it won't download. Any ideas?


It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following blog article, as it describes the use of a card reader as a muc ... Canon PowerShot SD600 Digital Camera

My computer won't recognize my nikon coolpix s550 since I installed system upgrades. Any ideas


I want a digital camera drive ... Nikon Coolpix S550 Digital Camera

My Laptop wont pick up my Coolpix S230 I have tryed to add a device and it tries to then it stops and says that there was a problem I also tryed another way and all it said was Nikon and 700, 800,930 I cant remember exactly what they were but it never had the coolpix S230 selection. So I have no idea what to do please help. Also I did read somewhere that I need to download pcs chipset installation utility but I cant find a free one anywhere.


First make sure that your USB-wire is working, by this I mean trying to use another wire, or trying to use another device whit the wire.\015\012\015\012If that does not help, try to plug the camera to another USB port on your computer.\015\012 ... Nikon COOLPIX S230 Digital Camera

Downloading images When I install the cable to download images to my computer, I am getting a message that there is a "Power Surge on Hub Port". This has come out of nowhere, it was working fine last week. The detailed message says "A USB device has exceeded the power limits of its hub port". Any ideas? Thanks, Ann in Toronto


Possibly a short in the camera, cable, or the port itself. Recommend trying another port. If that doesn't help, then please see the following blog article, as it describes the use of a card reader as a much easier, faster, and less error prone way ... Canon PowerShot A540 Digital Camera

I have lost my installation disc for this device and have now upgraded my computer. i have been looking on the net all morning to try and find a solution but with no luck. please can you help!!!


... Disney Pix Micro Digital Camera

Have an Olympus Digital Camera FE-280 and had and put the Olympus Master 2 disk into my computer. Was running fine until I tried to install an upgrade that Olympus sent me. Now I am getting an error message from the Microsoft Visual C Runtime Library that says the following "Runtime error! Program C...Application has requested the Runtime to terminate in an unusual way. Please contact the appli8cations support team for more information." I think it may be having a problem with the Family Tr


Before anything else, DO system restore to bring you back to a date where you didnot install Master2.\015\012\015\012another way is:\015\012you can try to delete it manually on your registry. \015\012go to registry and control ... Digital Cameras

I wanted to download photos to PC; I must install USB1.1 Device in order to download our pictures. My Vista Computer will not install USB1.1 Device;we received the following message: "Please consult with your device manufacturer for assistance getting this device installed. Richard and Diana Peterson email address: [email protected] Thank you


What make and model of camera do you have? ... Digital Cameras

I just recently got a new computer, I downloaded the Kodak EasyShare program, now I'm trying to upload my pictures from my camera to the computer,and it says 'Installing Device' then it says 'Device was not successfully installed'. It gives me no instruction about how to get it to Install successfully or why it wouldn't install. I have a Kodak EasyShare C813 camera. Please help! Thanks!


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Kodak Easyshare C813 Digital Camera

Transferring pictures I have the Kodak easyshare C875, I plugged the usb cable into the camera and into the computer and when the device manager tries to install it, its says that it failed and to consult with my device manufacture for assistance getting this device installed.


I have the same problem, that it's not recognized. I am looking into seeing if it's the new service pack from windows. Or the crappy usb cord, mine is too tight. ... Kodak EasyShare C875 Digital Camera

I can transfer images from my nikon d700 to my desktop. The Nikon software have been installed in my computer. Every time I switch the camera on, to start transfer. The computer system says installed "device driver" . Whats device driver and where can I install it from? thank you....syed


Your computer is looking for a mass storage device. Go through the camera menu system and make sure "USB Connection" is set to Mass Storeage, then Windows will automatically install the drivers. ... Nikon D700 Digital Camera

Hi, I have an Ixus 870 but my computer cannot detect the device when I connect it with the wire provided. Can you advise what can be wrong? At first I didn't install zoombrowser (which I thought I did not need), but now even after installing, the device cannot be detected. THanks!


First thing will be to download or update the driver. You can get it for free on manufacture's website and sometimes other sites as well. Then after it is dowloaded, then double-click on the file so it installs into your registry. After it installs i ... Canon Digital Cameras

I have loaded the software from disc supplied with my webcam 9000 but keep getting told that upgrades are required when I start my computer. If I say yes upgrade deletes software already installed gets halfway through loading them I get a message error 1702 a problem with the windows installer package requiring a script. Then left high and dry and have to reload the disc.


Completely uninstall everything associated with the initial install of the camera, might require going into the registry and looking for any instance of the camera. Before you try reinstalling, make sure you have the most recent version of explorer a ... Digital Cameras

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

Can't transfer or view images from camera to computer. All USB ports are working on computer. Double checked connections. Get following messages: 1. installing device driver software 2.searching pre-configured driver folders 3. software for this device has been successfully installed...pending.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Sony Digital Cameras

USB Error My computer will not recognize my usb device that came with my camera. I also tried with another usb device from a different camera (same model) and it still did not work. My camera has the message USB error and my computer generates the message: 'USB device not recognized. One of the USB devices has malfunctioned and Windows does not recognize it'. I received the same message with both USB cables. I thought that I may need to install the drivers for my camera, but my computer does no


Are you turning the camera on after you plug it in to your computer? You should do that with all your USB devices. Let me know if that helps. Feel free to rate my answer.\015\012\015\012Rob ... Polaroid i735 Digital Camera

Usb issues I tried to upload my images from my A540 and i get a bubble that comes up on my desktop this device can perform faster this usb device can perform faster if you connect it to a Hi-speed usb 2.0 port. when clicked on brings up a window that says the unknown usb device is a hi-speed usb device and will function at reduced speed when plugged into a non-hi-speed port It tells me that there are no HI-SPEED USB host controllers installed on this computer so it gives me a recommendation the


Dear customer,\015\012\015\012 Though you get these msg's which you have mentioned, you can ignore them, and try manualy installing the driver software for the camera, somehow.\015\012\015\012Thankyou ... Canon PowerShot A540 Digital Camera

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the


Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

UI have installed Kodak easyshare Sofware when I had windows vista so then my hard drive crashed and I have had Windows 7 installed. Koda Easyshare software was accepted but now when I intal the cable to download pics onto my laptop, it says the device failed to install so as a result I cannot download photos. Please, what can I do to rectify this problem? Thanks.


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Kodak EASYSHARE M1063 Digital Camera

I was having trouble installing the drivers for my creative notebook camera(its a VF0250) and i downloaded the latest versions straight from the website. when i would plug it in it said "device not recognized" and would search for the drivers but never found them. until i manually had to find them. i went on device manager->right clicked properties then went to the driver tab and clicked update driver-> clicked imaging devices and found the creative webcam driver there. now atleast the webcam re


You probably installed the wrong driver by doing that ..and what you need to do is go to the support site ..and download and install the correct one ...the camera need to be identified and to say that the device is installed and ready to use in order ... Digital Cameras

I can not install the canon solution disc that came with my canon 7d, any ideas? It just runs through installation then says they were not installed please try again


You don't need the Canon software.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB o ... Canon PowerShot SD750 / IXUS 75 Digital Camera

ACDsee software Hi, Your advice on upgrading Windows doesn't actually help me - i need help installing the camera software! I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open


Here is the Pentax Optio S12 software:http://www.freedriverload.com/all43095.html ... Aqua Pentax Optio S12 Digital Camera

My name is Chris and my wife just bought a Panasonic DMC-TZ5 digital camera. I was trying to install the hardware to my computer and have the installation disc. Everything is loaded onto my computer, but my computer consistently says that the "USB Device Not Recognized". I went to troubleshoot the problem and it says that "there are no drivers installed" in my USB port. I'm currently using Microsoft XP Professional. I'm running out of options. I'm not sure if my computer is compatible with


I use a memory card reader (about $15) to retrieve photos and toss the software that comes with the camera.\015\012\015\012Another possible solution would be to go to panisonic.com and download the latest software.\015\012\015 ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1205 seconds