Having problems with your Sony Cyber-shot DSC-W55 Digital Camera ?
Everytime I turn it on..the screen shows "access" and then it say turn off and turn on again?
Reset the camera from Camera Manu option.Thanks.
And how are you supposed to do that,whats manu
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W55 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Everytime I turn it on..the screen shows "access" and then it say turn off and turn on again?
Reset the camera from Camera Manu option.Thanks. ... Sony Cyber-shot DSC-W55 Digital Camera
I am on my third dsc w50 and they all had the same problem and don't work??? all say... access then... turn power off-on again" HELP! Same as marimccall. Black screen with 'Access', lens moves in and out three times and then the screen shows 'Turn the power off and on again'. When turning off and on again the same sequence is repeated. Any help would be appreciated.
Hi,Error message "access then turn power off-on again" comes in DSC-W50 when lens mechanism failed to provide Initialize signal to system control IC. When camera powers up, lens extended and there is photo coupler that sends pulse to syst ... Sony Cyber-shot DSC-W50 Digital Camera
SONY i dropped my sony cyber-shot camera and the lense got pused in. everytime i turn it on all it is is a black screen that says "access". it makes werid noises and then after 10 minutes it says "turn the power off then on again" and i keep doing that but nothing happens.
The lens element is damaged internally and needs to be replaced as an entire unit. The camera runs through a "self check" each time it is powered up and it is detecting an error in the lens. Ship this unit to Sony in Laredo, TX. The warranty may not ... Sony Cyber-Shot DSC-S90 Digital Camera
I just bought a new nexxtech 16gb sdhc memory and everytime i turn on my camera it says the memory needs to be formatted. after choosing "continue" when it says formatting will delete everything it shows then formatting screen then says the memory card needs to be formatted... again. i've gone through this whole song and dance at least 30 times and still nothing. it's a brand new memory card so i don't know what the problem is. help please?
I would check your C663 manual to make sure your camera is capable of reading a 16GB card. Because thats a fairly large drive for such a a legacy camera I would also insert the card in your PC and format it there to make sure it is functional. Mayb ... Kodak EasyShare C663 Digital Camera
Sony DSC-S600 Sorrry! What happens is this:- Turn camera on,Cybershot screen opens up with musical jingle then it will say "Access" then another screen opens up saying "Turn power off and on again". Sometimes you don't get the "Access" and it will go straight into the "Power off and on again" screen. Tried this - no good. Changed batteries for fully charged brand new 2700mAh NIMH - 1.2V Uniross - still no good ! Any advice would be appreciated. Regards
If you have a memory card in the camera, take it out before turning the camera on ... Sony Cyber-shot DSC-S600 Digital Camera
Just got a brand new NEVER OPENED '06' cuddeback Expert model C3300 from a store that never sold it. I put in new batteries and a 256MB CF card and went thru the setup..put in my name a passcode..set the delay blah blah blah....heres the problem..everytime i turn it on the first thing the screen says is "do not remove card" immediately..it keeps flashing this for like 3 minutes. then shows me images taken and I can change from standby to live or scroll thru the setup..but once it goes back to t
Hi gtepwisc. I just bought a Expert also and the problem was similar. My package was opened and I paid $150 at The Farm. They told me not to worry, anything wrong with it and Cudde would take care me, as it should be warrantied for a year. YEAH RIGHT ... Buck Cuddeback Expert Game Camera
My mother bought me a polaroid a815 today. when i turned it on, then screen said place SD card. When i did that a card error sign showed up. Then, another screen saying format cancel or execute. It wouldnt let me go to cancel so i had to hit execute. Another screen saying busy,,,please wait shows up. None of the buttons work whenever this screen appears. HELP!
... Polaroid Digital Cameras
I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem
You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras
I have a sony cybershot mpegmovieVX DSC-W55 I was turn it on & it say access on a black screen then it starts making a noise and another screen pops out and says to turn the power off and on again. SO I tried that & it does the same thing all over again..HELPP! I dnt know whats wrong with it.
Hello and welcome to FixyaThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a pr ... Sony Cyber-shot W110 Digital Camera
My Friend dropped my DSC-W30 camerashot on brick floor (it was nocked off a not very high table) and now when I try to turn it on.. the lense just comes out then half way in then out.. (it looks liek a confused robot) like no joke. and all the screen says while it is doing this is '' Access '' and after a min or two.. it makes this beeping sound and the screen says '' Turn the power off, and on again '' ? i tryed it.. it continues the same rutine. Please help? my father gave this to me as a gift
Try Power Resetting the Camera.First, please turn OFF the Camera.Then, remove the battery pack from the Camera.Then, press and hold the POWER button on the Camera for 30 seconds.Then, reinsert the battery pack and check whethe ... Digital Cameras
My Friend dropped my DSC-W30 camerashot on brick floor (it was nocked off a not very high table) and now when I try to turn it on.. the lense just comes out then half way in then out.. (it looks liek a confused robot) like no joke. and all the screen says while it is doing this is " Access " and after a min or two.. it makes this beeping sound and the screen says " Turn the power off, and on again " ? i tryed it.. it continues the same rutine. Please help? my father gave this to me as a gift for
Unfortunately the camera is non repairable short of dropping it again in hopes it jars the auto focus alignment back into position. this is a one in a million shot , but what have you got to lose. ... Sony Cyber-Shot DSC-S90 Digital Camera
Black screen Not able to take pictures when you turn on camera it either has a black screen or it says access also it might say turn power off and on again.
Hi, \012\012Turn the power off and on again message is displayed when the Lens mechanism is stuck or when there is an internal malfunction. To resolve the issue, try turning off and on the power for few times. If the issue persists, try p ... Sony Cyber-shot DSC-W55 Digital Camera
When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom
Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras
ACCESS??? When I turn on my camera, I get a blank screen that says "Access". The lens moves in and out several times on its own and then after a moment, tha camera beeps and says to turn off and on again. I've done this...the problem still exists!
1. Please make sure that you're using a fully charged battery.2. Please try Initializing the Camera. To initialize the Camera.First, press the Menu button on the Camera to display the Menu items.Then, select the SETUP option under t ... Sony Cyber-shot DSC-W70 Digital Camera
My sony digital camera won't fully turn on. when you push power the screen stays black but it says access and the lenses repetitively goes in and out with a 3 second pause between. then finally it stops and says to turn the camera off then back one. but this keeps occuring and it won't fully turn on. HELP!
There is some problem with your sensor in lens so only you are getting this problem .......so better check the sensor..... ... Digital Cameras
I have a sony cybershot wsc 1000 which when the camera is turned off the lens will not go back in.When turned on again the screen says Acess and then "turn the power off and on again" when i do this nothing happens and when switched on again it is exactly the same .the camera will not take pictures or show anything on the screen .It will playback old pictures.Any Clues?
Lens mechanism of your camera isn't working and you need to contact nearest Sony repair shop to fix camera properly. ... Digital Cameras
Getting access I turn the camera on, then the word access appears on the screen, then it says to turn the camera off and on again. it keeps repeating this each time you turn the camera on. How do I get pass this and be able to use the camera???
Gently hold the lens when you first turn it on to prevent it from going back in the camera. That worked for me. ... Sony Cyber-shot DSC-W30 Digital Camera
Cannot turn off picture protection feature on VPCS1070. I can get to screen that shows little key, but can't figure out how to turn it off. By the way, I'm 79 years old (Brownie Kodak age), so am not to computer savvy. The manual says just go o the protection screen and turn it off or on. I can't find where to do that.
Never mind - I finally fixed the problem. I just reformatted the Internal Memory and all is well. Thanks Anyway. ... Sanyo Digital Cameras
When I try to turn my sony dsc-w55 camera on, the screen says "access" and the lens cycles in and out 3 or 4 times and says to turn off the power and turn on again. Any solution??
Bang in in table. Turn it on again and gently hold lens out. Viewfinder will spring into action again immediately!!! ... Sony Cyber-shot DSC-W55 Digital Camera
Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara
Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera
When I turn my camera on, the lens goes in and out and the screen says "Access," then says "turn off and back on" but it never comes on.
Lens of camera is bad and requires replacement that would cost more then camera worth. Best option is to buy another camera. ... Sony Cyber-shot DSC-W80 Digital Camera
Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.
Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera
When you turn power on, the screen says "access" the lens move in and out and then it says"turn the power off and on again"
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: rem ... Sony Cyber-Shot DSC-S40 Digital Camera
!!! help my brother dropped by sony cyber-shot on the floor and now when i turn it on the screen says "access", the lens goes back in and then comes back out a couple of times, and then it says "turn the power off and on again." what do i do?
Yeah, mine was doing that too. only way it would work is if you tap the bottom of the camera on something. But mine finally today stopped working even after doing that. now it's just garbage. my suggestion is just to purchase extended warranty from n ... Sony Cyber-shot DSC-W55 Digital Camera
Every time I try to turn the camera on it beeps and the screen says access... then says turn the power off then on again. Why?
Hi, This problem is related to optical zoom motor,The part detail is given below:Part No. DescriptionA-1231-924-A LSV-1160AReplace the said part number and your camera ... Sony Cyber-shot DSC-W80 Digital Camera