Having problems with your Sony Cyber-shot DSC-W55 Digital Camera ?

When i turned on camera shows 'access' then, turn the power off and on again'..WHAT CAN I DO?please reply.

Answers :


The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W55 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i turned on camera shows 'access' then, turn the power off and on again'..WHAT CAN I DO?please reply.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W55 Digital Camera

After pushing power button, the screen shows "Access", then the camera makes a noise like it is rewinding, and then the "Access" changes to "Turn the power off and on again". When you power off, the camera repeats the entire process. What's up?

Problem in lens unit repair or replace ... Sony Cyber-Shot DSC-S40 Digital Camera

Hello when i turn on the camera sony dsc-w70 it show me a massage "access" and then show me "turn the power off and on again" how to solve this problom ? thanks [email protected]

Hi,   This problem related to the main board.Its getting malfunctioning.You have to replacw it from nearby SONY SERVICE CENTRE.Thanks for using fixya,And dont forget to rate. ... Sony Cyber-shot DSC-W70 Digital Camera

Every time I turn my camera on it shows the word access in the screen and then tells me to turn the power of and on which I do but nothing happens.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Sony Cyber-shot DSC-W55 Digital Camera

When I turn on the camera the lens goes in and out 3 times with the word 'access' showing. then it beeps for 5 seconds and says "Turn the power off and on again"

Try the procedure in this tip. ... Sony Cyber-shot DSC-W50 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem

You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom

Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

My camera was dropped accidentally while capturing a image. After that i switched off and when I switched on for next snap, display shows access and after few seconds a message appears saying" Turn the power off and on again" I did this several times but no effect and even i removed the battery and inserted back still no use. Please help.

I am a technician who repair any electronic devices, i repair digi cam a few hours ago, foreign object or dust is not the cause of that error, digi cam has 3 lenses, 1 is outside lens, 2 is is the swinging lens and 3 is the retractable lens,... do no ... Sony Cyber-shot DSC-W55 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju

Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

My camera wont turn on. Its battery is completely charged but the camera still doesnt turn on when i press the power button. It usually turns on and off real fast when its battery is dead but it shows no sign of power

... Canon PowerShot SD750 / IXUS 75 Digital Camera

When I turn the power on, it beeps and says "turn the power off and on again" plus it shows a battery in the upper lefthand corner. When I turn it off and on, I get the same message. I can view stored pictures but can't take pictures. I have charged the batteries and it makes no difference. Since I have been using and recharging the same batteries since I got the camera, could it just be that I need new rechargeable batteries? I bought the camera in 2004 and love it. Is there any hope for this c

I'll forward a link to a page where you can view the information to troubleshoot this issue. Please click on the link to view the troubleshooting steps then follow all the steps and check if that helps. ... Sony Cyber-Shot DSC-P52 Digital Camera

I am on my third dsc w50 and they all had the same problem and don't work??? all say... access then... turn power off-on again" HELP! Same as marimccall. Black screen with 'Access', lens moves in and out three times and then the screen shows 'Turn the power off and on again'. When turning off and on again the same sequence is repeated. Any help would be appreciated.

Hi,Error message "access then turn power off-on again" comes in DSC-W50 when lens mechanism failed to provide Initialize signal to system control IC. When camera powers up, lens extended and there is photo coupler that sends pulse to syst ... Sony Cyber-shot DSC-W50 Digital Camera

My camera turns on and then right back off. wen u press the power bottom the screen comes on and shows the Kodak label like its turning on and the lense begins to open but immideatly closes and the camera turns back off. i charged my camera all night but the problem persisted. the only thing i can think of is tht the day this happened i took my camera with me to the beach and it was warm but not extremely hot.

I had the same problem. This is how I fixed mine! Turn on camera grab the lens with two fingers before it can re-tract back into the camera and shut it self down. Use compressed air around the lens housing no more the 80 PSI. Hopefully t ... Kodak EASYSHARE M1063 Digital Camera

Sony DSC-S600 Sorrry! What happens is this:- Turn camera on,Cybershot screen opens up with musical jingle then it will say "Access" then another screen opens up saying "Turn power off and on again". Sometimes you don't get the "Access" and it will go straight into the "Power off and on again" screen. Tried this - no good. Changed batteries for fully charged brand new 2700mAh NIMH - 1.2V Uniross - still no good ! Any advice would be appreciated. Regards

If you have a memory card in the camera, take it out before turning the camera on ... Sony Cyber-shot DSC-S600 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res

Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

I've had a pentax K110 for 4 years now. everything has worked great until recently. when I put freshly charged batteries in (no matter what brand) the camera will work for about 20 shots and than 1-the sutter clicks once as if trying to take the picture but does not want to re-open. it will only re-open if i turn the power off. also if i try to use the flash it will show that i have no battery power. but when i turn it on and off again the battery will show full. I need your help. Karl

... Pentax K110D Digital Camera

My Sony cyber-shot lens keeps going in and out 3 times when I turn the camera on. Then "Turn the power off and on again" shows up on the viewer. It does this every time I turn the camera on. Bill (301) 996-1252 (cell) I am a realestate agent and need my camera. Thanks

Hi,Thanks for using Fixya.To resolve this issue, try out these things:-\015\012\015\0121.Take out the batteries and replace it with new one.\015\012\015\0122.If turning the power on and off again does not res ... Sony Digital Cameras

Power cycling My T1 sarted turning itself off and on while in the cradle. I was downloading pics to my PC. Power to the cradle is not connected. Only the USB cable. Also, it appears that openning or closing the lens cover is not always turning the camera on and off as it should. Power shows 45 min left. I have removed the battery and it looks OK. Contacts appear clean.

This seems to be a circuit fault\015\012check the manual[Full manual on the software CD in PDF]\015\012And look for any fault indicators.\015\012If no sign then the manufacturers Support\015\012If it is 'young camera' it may be replaced.\015\012But ... Sony Cyber-Shot DSC-T1 Digital Camera

I need some help to repair my Sony Cybershot DSC W50 camera. When you turn the camera on, it displays 'Access' for about 30 seconds, during which time the lens zooms in and out. Then it says 'Turn the power off and on again'. Nothing has happened to the camera - it has not been dropped and this fault just suddenly started. What can I do about this? I have had it just over a year. I’d be really grateful for any support! Thank you! Clare

When the camera is switched on it turns the lense out to a certain position and locks , but if due to any reason if the lense does not reaches to its proper position it retracts back and tries again 2 or 3 times, and then the movement haults and pr ... Digital Cameras

The camera will not turn on after being dropped. When I switch it from off to on, the green power LED flashes briefly. The lens does not move or attempt to extend. The LCD backlight does not illuminate. The LCD appears to be slightly damaged: there is some slight non-uniformity visible when I shine a strong light on it. Otherwise the camera shows no sign of damage. Is it possible that the damaged LCD is preventing the camera from turning on? Is there a hard reset procedure I should try? I've t

I have the same problem. Can someone advice ... Panasonic Lumix DMC-ZS3 Digital Camera

Camera problem when I turn the camera on the lens goes in and out and in and out thenthe screen says access then turn the power off and on again, battery ifcharged but when I turn it on again the same thing happens...I am inArgentina on holiday can you help?

Try new batteries anyway. There's always a chance that your existing batteries are no longer any good, even if they aren't very old. ... Sony Cyber-shot DSC-W50 Digital Camera

After inserting the battery back in the camera, the camera become stuck in a loop. The camera turns on but the screen stays black with only the words "access" appearing on it. Then the lens keeps adjusting itself and after a minute it says to turn the power off and on again. So I did that and it does not work.

This is courtesy of an outside expert.\015\012You may not believe this and I hope you haven't spent a lot of money fixing your problem. I ... Sony Cyber-shot DSC-W50 Digital Camera


The camera uses a TFTLCD monitor, which is a high power usage device, any battery that are not high power will have the same results as you do (I have the same camera and done the same with cheaper batterys).I will say go to a supermarket ... Hitachi Digital Cameras

I have a sony cybershot wsc 1000 which when the camera is turned off the lens will not go back in.When turned on again the screen says Acess and then "turn the power off and on again" when i do this nothing happens and when switched on again it is exactly the same .the camera will not take pictures or show anything on the screen .It will playback old pictures.Any Clues?

Lens mechanism of your camera isn't working and you need to contact nearest Sony repair shop to fix camera properly. ... Digital Cameras

I cannot get my casio exilim 7.2 pixel camera to power up I have tried charging the battery, but the red light shows for a minute then it goes off When i insert the battery in the camera, it powers up for a few seconds, makes an intermittent buzzing noise then turns off.The camera is about 18 months old

If the light blinks while charging then it means that you have a faulty battery and it needs to be replaced. Usually they only last if you're lucky 12 months so I would suggest replacement of the battery and that should solve your problem. :) ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4918 seconds