Having problems with your Sony Cyber-shot DSC-W55 Digital Camera ?

Turning on the camera the lenses go in and out and the access appears on the screen.


Answers :

\012Hello

The problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

Hope \012the advise is useful.

Regards
Andrea\012\011\011
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W55 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Getting access I turn the camera on, then the word access appears on the screen, then it says to turn the camera off and on again. it keeps repeating this each time you turn the camera on. How do I get pass this and be able to use the camera???


Gently hold the lens when you first turn it on to prevent it from going back in the camera. That worked for me. ... Sony Cyber-shot DSC-W30 Digital Camera

My Sony DSC-H50 Digital Camera has the following symptoms. When I turn it on, it appears as if it tries to move the lenses, but they do not move. A message appears on the screen turn the camera off an on again. This does not work. Removing the battery and then turning the camera back on does not work either. I tried initialize and reste the parameters to default, but that does not help either.I can view pictures that are stored on the camera


Http://www.sony.co.in/support/product/dsc-h50\015\012\015\012\015\012\015\012 ... Sony Cyber-shot DSC-H50 Digital Camera

Turning on the camera the lenses go in and out and the access appears on the screen.


\012HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you co ... Sony Cyber-shot DSC-W55 Digital Camera

Error message When the camera is turned on 'access' appears on the screen. shortly after 'turn off and on again' appears and the camera beeps. However, when we do this the same keeps happening


My camera did the same thing, lens retracts 3 or 4 times, and then proceeded with an error message "turn off and on again". I pressed the power button probably about 10 times, didn't work, so then i gave it a good smack on the top of the frame a few ... Sony Cyber-shot DSC-W70 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Zoom error I turned my F470 camera on and received a "zoom error" bar across the screen. The lense does not move outwards after I turn the power on, nor does the plastic sliding screen close when I turn the camera off. The lense is exposed whether or not the camera is on or off. The lense does not make any sounds when I turn the camera on, but I hear (what I think) are the gears when I turn the camera off. When the camera is on, the screen is working, but the image is blurry. I tried other poste


Hey MBB722,\015\012 What is most likely going on is there is something stuck in the lens obstructing its movement (i.e. sand). I don't know what you have tried and what you have not tried you can try placing the came ... Fuji FinePix F470 Digital Camera

My sony digital camera won't fully turn on. when you push power the screen stays black but it says access and the lenses repetitively goes in and out with a 3 second pause between. then finally it stops and says to turn the camera off then back one. but this keeps occuring and it won't fully turn on. HELP!


There is some problem with your sensor in lens so only you are getting this problem .......so better check the sensor..... ... Digital Cameras

Lense stuck outside MY LENSE GOES OUT AND GOES IN (NO STOP) OUTSIDE OF MY CAMERA INFO APPEARS AT LCD MONITOR: ACCESS; WENN THE LENSE STOPS, THE NEXT INFO APPEARS AT LCD MONITOR: TURN THE POWER OFF AND ON AGAINST I FOLLOW BUT NO EFFECT DO I FIX IT?


You need to send this to the shop, im afraid, these tiny parts are not easy to repair, the home positioning sensor need some repairing ... Sony Cyber-shot DSC-W30 Digital Camera

After inserting the battery back in the camera, the camera become stuck in a loop. The camera turns on but the screen stays black with only the words "access" appearing on it. Then the lens keeps adjusting itself and after a minute it says to turn the power off and on again. So I did that and it does not work.


This is courtesy of an outside expert.\015\012You may not believe this and I hope you haven't spent a lot of money fixing your problem. I ... Sony Cyber-shot DSC-W50 Digital Camera

When I turn on the camera, for few seconds it shows the image trough the lense, but inmediately it seems to turn off, and this legend apears on the screen: D5 f 08 5 f 0a 5e02 5 f 085 e02 the battery is ok, the memory stick appears to be ok, so I assume is a software problem. how can i solve this? I do not have the disk of the camera since my son lost it.


The error is a lens motor error. The lens is not able to properly move and the camera then gives the error message. Sometimes dirt can be stuck in the lens or it could just be a mechanical problem that needs repairs. If you point the camera lens towa ... Olympus Stylus 710 Digital Camera

When i on the camera "Access" appears on the screen,the lens comes out and goes back 3 or 4 times and after few moments it appears "turn the power off and on again".When it is shut off and turned on it do the same again.What is the problem?


If the camera has recently been dropped you may have lens damage that's\015\012preventing it from powering up. If it hasn't been dropped your\015\012problem\015\012may be due to weak/worn out ... Sony Cyber-shot DSC-W100 Digital Camera

Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara


Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera

My Sony 7.2 Cybershot camera recently ran out of battery, so I charged it. Once it was done charging, I put the battery back in. The screen showed up asking me to insert the current date and time, so I did so. Next, the zoom lense went out and in, out and in, and out and in while the screen said "Access". Next, it told me to turn the camera off and on again. Nothing happens when I do so, and I've done it about 10 times to no avail. Is this a fixable problem?


... Sony Cybershot DSC-T200 Digital Camera

Screen Problem When we turn on the camera, the lense opens, but there's no display on the screen. The screen does not appear to work in any "mode". We've changed batteries, but no help. Thanks for any info you can give


Try calling canon customer support it sounds like a ccd sensor.canon just replaced my ccd sensor in a s1 is for FREE.does not matter about warranty ... Canon PowerShot S5 IS Digital Camera

Lens stuck The lense is stuck in the out position. Batteries were replaced but the camera says on the screen "Access", "Turn the power on / off again", and still does not retract the lense.


Solution:The Lense is obviously jammed some how.Suggestion:Send the product back to the manufacturer and see if they can repair the product or send you a new one. ... Sony Cyber-Shot DSC-W1 Digital Camera

When power is turned on the zoom lense moves in and out on its own for a couple of seconds then stops. Camera remains on (battery is charged) The message changes from "access" to "turn the power off and on again." When that is done the same process happens again. Photos can be retrieved that are in the memory to view but the problem is getting to the starting screen in order to take a picture. What's up with that? Hope you can help!


This could be dust or lint or sand that has worked it's way into the lens assembly, and is keeping the lens from initializing. Often, you can take compressed air and blow it into the front lens assembly, to try to free up the small gears there. H ... Sony Cyber-shot DSC-W55 Digital Camera

Faulty Lens? Sometimes when looking through the LCD screen the colours appear blended, overlapping and blotchy which makes it difficult to get a clear view of the item to be photographed. upon turning on (sliding open lense cover) screen view is distorted, "stretched", and item to be photographed is almost unidentifiable. Camera operates but pictures taken are "stretched" and distorted. However, stored pictures can be retrieved and are normal. Any advice?


Dear Swetnam\015\012\015\012 This is a internal circuit problem/defect and cannot be done on our own, so u should take it to SONY service centre. Avoid keeping the camera near hot temperatures zone. Sony is not tolerant to many physic ... Sony Cyber-Shot DSC-T1 Digital Camera

SONY i dropped my sony cyber-shot camera and the lense got pused in. everytime i turn it on all it is is a black screen that says "access". it makes werid noises and then after 10 minutes it says "turn the power off then on again" and i keep doing that but nothing happens.


The lens element is damaged internally and needs to be replaced as an entire unit. The camera runs through a "self check" each time it is powered up and it is detecting an error in the lens. Ship this unit to Sony in Laredo, TX. The warranty may not ... Sony Cyber-Shot DSC-S90 Digital Camera

WHEN I TURNED MY CAMERA ON, THE SCREEN STAYED BLACK AND THEN IT BEEPED 5 times AND THE WORDS "LENS ERROR RESTART CAMERA" appeared. I did press the on button again and it just does the same thing. Also the lenses did project out and that doesn't go in now either. My batteries are charged. Can you help?


... Canon PowerShot A560 Digital Camera

I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do anything


The lens is bad, needs to be replaced. Maybe purchase camera on ebay with broken LCD but good lens. Replacement can be time extensive. Will need #00 or #000 phillips screwdriver and solder iron. Remove 6 exterior screws+2 inside battery door. Take of ... Olympus FE-170 Digital Camera

My camm! I have an olympus digital camera fe-170. when i turn on my camera, the lense come out and the LCD screen is black, when i try to turn it off, it doesnt turn off, but after like 10 seconds it turns off by itself. but when it turns off the lense dont go back in?! then when i try to turn it on, its the same thing. when i plug it into the computer, the lense go back in, but when i unplug it from the computer and try to turn it back on again...SAME PROBLEM. i did drop it before, but can i do


I think thy will say you, replace lens unit. but lens is very expensive, so we can buy new one camera. I have the same problem, i found focusing lens wheel teeth slipping, no parts available, so i covered a gum coat on the teeth. ... Olympus FE-170 Digital Camera

When camera is turned on screen shows no image and "No Image" appears, if a picture is taken screen is totally white, yet camera appears to function.


This is a processor fgailur - Canon Support will adive the best route for this ... Canon PowerShot SD600 Digital Camera

My camera fell out of my pocket on a ride at the amusement park and it fell into a some small bushes and when i turned it on the lenses kept going in and out while the screen said access and then i tryed wiggling the lens and then i ended up getting them stuck what do i do?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Digital Cameras

Well i dont really know but when i star over the cam the screen is black and it doesn't appear nothing so just a leyend that says access when I take off the memory stick said turn on again the camera just that nothings more happen i cant take care piks


Looks like a CCD image sensor failure a common fault in digicams these days. Point the camera somewhere and blindly take a shot. Open the image on your computer and see if it appears all dark. If it does then its an image sensor failure. On the contr ... Sony Cyber-shot DSC-W55 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8725 seconds