Having problems with your Sony Cyber-shot DSC-W55 Digital Camera ?

I am facing a problem in turning on my camera Cyber-shot DSC-W55, after switching on , a message is displayed " Turn off and turn On again". Please guide.


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W55 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am facing a problem in turning on my camera Cyber-shot DSC-W55, after switching on , a message is displayed " Turn off and turn On again". Please guide.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W55 Digital Camera

My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?


... Kodak EasyShare CX6200 Digital Camera

Displaying "turn the power off and on again". But i have turned off the camera lot many times and when i switch on the same message is repeating. I have replaced the battery and memory card but no use. the lens is opening and closing.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Sony Cyber-shot DSC-W80 Digital Camera

Sony cyber-shotdsc-w50 lense won,t retract when switching power off. when switching on screen message displays turn power off and on again


You must reset the lens this means taking the camera apart and reseting the lens.call 423-790-1480 and I'll explain whats envolved. ... Digital Cameras

My camera was dropped accidentally while capturing a image. After that i switched off and when I switched on for next snap, display shows access and after few seconds a message appears saying" Turn the power off and on again" I did this several times but no effect and even i removed the battery and inserted back still no use. Please help.


I am a technician who repair any electronic devices, i repair digi cam a few hours ago, foreign object or dust is not the cause of that error, digi cam has 3 lenses, 1 is outside lens, 2 is is the swinging lens and 3 is the retractable lens,... do no ... Sony Cyber-shot DSC-W55 Digital Camera

We bought a new Vivitar DVR 790HD camera recently.When we first got it the power button started the camera but soon after it went dead. We connected the charger to the camera with the lead supplied and the screen turns blue and displays the letters MSDC.There is no indication to say that it is charging. After quite a while we disconnected the charger but the camera goes dead and won't switch on. There is no mention of how to charge the battery in the easy guide and the cd included won't downloa


It's brand new. It's faulty straight out of the box. Just return it for a refund or exchange. ... Digital Cameras

I have a Sony CyberShot DSC-W55. When I switch on the camera, the lens goes in and out a few times and I get the message 'Turn Power Off and then On' When I press the playback, I am able to view the images stored in my card. What is the problem? Thanks


The part which comes out when the power is on might have got stuck .. there may be some dust particles. just blow over it or vaccum it.. ... Sony Cyber-shot DSC-W55 Digital Camera

Error 00183 When I switch on my camera 00183 is displayed and the following message: "Turn off and on again" I keep doing it but nothing is working. Please advice what to do. Thank you. Aaron


I think either your camera is damaged (accident) or there is some software problem. Go to the nearest service centre if under warranty. or there may be some software problem. take out your memory stick and scan it for viruses with some good antivirus ... Samsung i85 Digital Camera

I have a Sony CyberShot DSC-W55. When I switch on the camera, the lens goes in and out a few times and I get the message 'Turn Power Off and then On' When I press the playback, I am able to view the images stored in my card. What is the problem?


Contacts of the lens unit to the mother board of the camera is bad/clean and adjust the contacts and try. ... Sony Cyber-shot DSC-W55 Digital Camera

Hi there, I have a Canon Powershot S3IS and just lately when you try to turn it on it comes up with a message that says E24. I have looked through the manual and cannot find anything resembling this message. It turns on for a few seconds and then the screen goes black and displays the E24 message. I was taking photos during a recent wedding I attended and then it cut out suddenly and displayed the E24 and since then will not turn on. Please help me as my brother and his family are arriving soon


... Digital Cameras

About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!


Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .


Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera

Panasonic DMC-TZ4 When I switch on I get "Turn off camera and turn on again" message but it does not good. When I swtich off I get "workng hard" noises as if there is an effort to retract the lense but it will not retract unless I turn the camera on again. At that point the lense retracts and comes out again at once; more "hard work" noises and a new "turn your camera off" message. The only way to get the lense into the retrated position is to catych it at the right instant and remove the batter


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic DMC-TZ4 Digital Camera

Error message: Please turn camera off and then on again when camera is switched on. Battery is full ... it looks like everything is working well when camera is switched on. When switched off ... same message comes back up again .... Is there a reset function ??? Kind regards Matt


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Panasonic Lumix DMC-TZ1 Digital Camera

ERR message I have an err message that displays everytime i try to take a pic...i went through reset procedure and did not correct problem ..camera worked night before during a shoot..turned on next day and did not work...we dont have a nikon repair center anywhere close...i hope it something simple that can be fixed here ..it acts like its taking a pic, then message displays and goes off after about 20 sec


I'm afraid, according to the manual you have to send it in...\015\012I would contact Nikon either through their Web site or by phone. It is normally neither expensive nor complicated to send a camera in. Just pack it well to protect it and send ... Nikon D70SLR Camer Armor Smoke Digital Camera

When i turn my camera on it displays an error message "turn the power off and on again" when i turn it off and back on - it shows the same message


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras

When I turn on my Nikon D40 with the 18-55 mm lens set to autofocus I get an error message "Error. Turn Camera off and then on again." If I turn the lens switch to manual, I do not get the error. If I attache my 70-300 mm lens, I get the error regardless of the lens focus switch psition. I have just upgraded the firmware with no improvement.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Error message my nikon D -80 is flahing an error message. When i try to take a photograph i hear it cycle, but nothing is taken. The automatic focus does not work. I think i might have turned the camera off by accident while it was writing a photo to my card *sighs* I have tried removing the battery, a new card, remove and replace the lens, remove lens and clean contact, and talking very sweetly to the camrea. Nothing worked and the same messages is displayed when i turn the camera on. Any advic


This may be due to the aperture ring in your lens. Try the following:\015\012\015\0121. Turn off your camera\015\0122. Move the aperture ring clockwise then lock\015\0123. Turn on your camera and try again.\015\012 ... Nikon D80 Digital Camera with 18-135mm Lens

Won't switch on. Display - switch off camera and turn on again.


This is in a service loop and will not stop until the unit is repaired, ... FUJIFILM FinePix S2500HD Digital Camera

Camera was dropped. Now it will turn on, but after a few seconds, lens begins to move in and out for about 3-5 seconds, then a messag is displayed: Pleaase turn camera off then on again". Doing this r


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Panasonic Lumix DMC-LZ3 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3105 seconds