Having problems with your Sony Cyber-shot DSC-W55 Digital Camera ?
My camera just saids Access on the screen ... how do i fix this
Try reset the camera and let me know please.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W55 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My camera just saids Access on the screen ... how do i fix this
Try reset the camera and let me know please. ... Sony Cyber-shot DSC-W55 Digital Camera
Screen my camera turns on fine, but nothing shows on the screen. i fully charged the battery and it still doesn't show anything on the screen. you can take a picture, but the screen is still blank. when i tried to connect my camera to my computer it said connection fail!...does anyone know how to fix this?? or what's wrong at least?
The screen can be switched off to save power! Make sure screen is set to on position ... Sanyo VPC-E760 Digital Camera
Dropped camera I dropped my camera very lightly now the lens are stuck. Is there any way to fix this without going to a repair? I just got this one week ago and the drop was so light. THe screen works it says Access though and then it says turn the camera on & off i did this but it still doesn't help. But the menu screen & etc works. Please help, thanks!
Check this out\015\012\015\012http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sony Cyber-shot DSC-W55 Digital Camera
Sony camera When I power up my camera, the screen says Access and the lens goes in andout a few times and then the screen says turn the power off and on again. When I do that it doesn't fix anything, so I still have the same problem
Ok to fix this just switch on \015\012gently pull and twist the end of the lense you may here it click but dont pull or twist to hard till it pops\015\012then switch camera off and on again and you should have solved the problem.\01 ... Sony Cyber-shot DSC-W55 Digital Camera
Canon SD400 I dropped my SD400 and it will turn on, but the shutter will not retract. However, the screen comes on in color and then goes black and says no image. I can access the menu screen while on the picture taking mode. If I move to anything else the camera beeps three times and turns off. What should I do? Can it be fixed? Should I take it somewhere to get it fixed... and where can I take it?
Its very eas to fix this one.. \015\012\015\012just use a small screw driver and open it up.. \015\012\015\012its possible that the gears were just misaligned. \015\012\015\012got mine fixed.. ... Canon PowerShot SD400 / IXUS 50 Digital Camera
My Sony 7.2 Cybershot camera recently ran out of battery, so I charged it. Once it was done charging, I put the battery back in. The screen showed up asking me to insert the current date and time, so I did so. Next, the zoom lense went out and in, out and in, and out and in while the screen said "Access". Next, it told me to turn the camera off and on again. Nothing happens when I do so, and I've done it about 10 times to no avail. Is this a fixable problem?
... Sony Cybershot DSC-T200 Digital Camera
My LCD screen on my Canon Power shot G3 is blank (just white). There are no icons; no viewing of things I wish to photograph. I called customer support they said there was no problem with the CCD image sensor on G series cameras per the Canon service letter of 10/6/05.I would have to pay about $135 plus shipping to get it fixed or trade for another camera which would cost me money also. I'm not happy with this because I assumed that Canon would fix the problem if it appeared on the G series. Ple
If the CCD were bad and everything else OK, you would see all the icons on the LCD (viewing screen), and you would be able to see images on the memory card that had been taken in the past while in Replay mode. The service letter you refer to covers r ... Canon Digital Cameras
Hey I have a problem with my fujifilm finepix jv100 camera. My mom was on vacation and the camera was working perfectly fine but then she said my aunt started using it and she pressed something and it made the camera look weird. When you take pictures its mostly completely white and you can't see anything on the image. Also before you take a picture or are recording it shows the screen like sort of purple-ish or pink-ish. If you know how to do a hard reset or if you know how to fix it, I would r
You can try to Recovery factory Settings\015\012If the problem was caused as "pressed something" this Recovery factory Settings will helpful ... Digital Cameras
Broken camera hi there,my husband rang a camera shop and they said it would be to dear to fix,i dont no what to do the camera cost us $500.00 and we only used it once we brought in on a p&o cruise,came home showing the cousins our picks and the bugger dropped it,we didnt realise it was broken to we went to use it the other day and the screen was just white couldnt do a thing,hubby cant find reciept for warrenty so we have blown our money not happy anyway thanks carol
Hi there, Warranty will not cover impact damage, unless you purchased it with a credit card that has that feature. If everything else works other than the screen, then the unit may have poor connections. You won't really know until you take it to a s ... DCS Digital Cameras
Help!!!!!!!!! I had just got my camera on my birthday from my sister who had it before me. It didn't come with a manual. I had just put a mp3 on it. I pressed some kind of button by a mistake and a key appeared on my camera screen. Not a big one, just a little one. Then, I couldn't do anything. None of the keys worked because it locked. Then my camera went to sleep. I pressed a button and it said Press shutter key then display key to unlock. I don't know how to fix it. Yes, I know it sa
Check out the manual i posted. it gives ya step by step directions. ... Polaroid izone 550W Digital Camera
When My DMC-TZ15 camera is fixed to PC with USB Port at Camera folder nothing appear.Then camera screen appear " Access". But all pictures have in memory card.
Shut the camea off and Pull out the memory card. Place it in a card reader, proceed from there ... Panasonic Lumix DMC-TZ15 Digital Camera
Lens Sticking My daughter has this camera and the lens is stuck out and will not retract. When she turns the power on ACCESS comes on the screen and says to turn the camera off and then back on, but the lens never retracts. How can I fix this? Thank you for ANY help that you can provide me.
The same exact thing happened to me when I accidentally dropped my camera on the ground. My dad actually fixed it for me. I cannot exactly remember what he did, but I know this can be fixed! =]\015\012\015\012He did something with the len ... Sony Cyber-shot DSC-W55 Digital Camera
We can't recover photos on the camera...somehow the format application was pressed and the photos have disappeared....in the bottom corner of the screen its show the number of photos are still on the camera, but we can't access them....how do we fix it????
I had success with this tutorial\011\011\011\011\011\011\011\011 ... Vivitar ViviCam 5355 Digital Camera
Have purchased 2 new cards cards will not format have lost instruction manual but did access format screen but now can not . camera said card formatting then screen went blank then switched off
Try formatting them in a computer. There is a possibility that the cards are not compatible with your camera. Especially if they are SDHC cards with a capacity of 4GB or more. You may need to format them and partition it as 2GB for yo ... Vivitar Digital Cameras
My DSC-T1 camera was working fine the last time i used it. I wanted to take some pictutes and I started to ujse it when I noticed that the image on the lcd screen had blurred lines up and down--hozional. I took it to a dealer and he said that the sensor was shot. Can my camera be fixed?
Hi.If the picture looks like blurry and shadowed, or has blurry lines, that is the CCD sensor.The CCD sensor is the device that captures light and generate the digital picture. It is an optical sensor located inside the camera ... Sony Digital Cameras
Well, the camera just shut off, and it went to a black screen it said Access in white letters and the lens kept going in and out, then finally went in and it said please turn off and on again and then it would do the same thing.
There is a problum in lense block actually it cannot get the correct focus thats why camera appear access in this case lense block is repaired with authorised person or change new one ... Sony Cyber-shot DSC-W50 Digital Camera
Screen Broken Hi, I had my Samsung l700 camera in my back pocket in a protective case yet the screen somehow broke on the inside and all I see is a black screen with two lines across it when i turn on my camera. The camerea can no longer take pics. They all turn out blurry. Is there a way I can fix this without having to can a new screen and if not where can I order a screen or get my camera fixed online.
HiWe can get you the LCD or do the repair for you if you prefer... though if the pictures are blurry that has to do with the lens not the LCD.When you take a picture with the LCD are you allowing the camera to focus before pre ... Samsung L700 Digital Camera
My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?
... Kodak EasyShare CX6200 Digital Camera
When downloading Presto! VideoWorks I got an error. "Error at loading of ippIP library No DLLs were found in the waterfall procedure" When I try to access video/pictures it says the device is not connected. As well as these problems on the camera screen once plugged into the computer does not recognize that there is a memory card present though in the user's manual it said it would. How do I get my videos/pictures?
... Digital Cameras
Sony Cybershot When i turn my camera on it has a black screen and says "access". Then after the lens goes on and in it tells me to turn it off and then back on but then it does the same thing all over again...How can i fix this ?
Turn on \015\012take hold of the end of the lense\015\012gently twist and pull the lense you may hear it click but dont force it then turn on and off and this may solve your problem ... Sony Cyber-shot DSC-W55 Digital Camera
Well i dont really know but when i star over the cam the screen is black and it doesn't appear nothing so just a leyend that says access when I take off the memory stick said turn on again the camera just that nothings more happen i cant take care piks
Looks like a CCD image sensor failure a common fault in digicams these days. Point the camera somewhere and blindly take a shot. Open the image on your computer and see if it appears all dark. If it does then its an image sensor failure. On the contr ... Sony Cyber-shot DSC-W55 Digital Camera
When I turned on the camera one day, just out of the blue, the lens would not focus and it would not work. The screen said that there was a "Lens Error". How do I fix what's wrong?
Try these procedures. ... Nikon Coolpix S210 Digital Camera
Zoom Error Camera was working one minute and then the screen said "zoom error" and wont let me take any pics...dont know how to fix...any help would be great!!
This usually happens when you turn on the camera with the lense cover still on. just turn it off and remove the lense cover and turn it back on again. hope this helps. ... Fuji FinePix S5100 Digital Camera
My camera fell out of my pocket on a ride at the amusement park and it fell into a some small bushes and when i turned it on the lenses kept going in and out while the screen said access and then i tryed wiggling the lens and then i ended up getting them stuck what do i do?
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Digital Cameras
Every thing seems to work but view screen is blue and takes a blue picture (has ripples that move when you point or move camera around like you can almost see something but you can't. My logo and phone number come up in the view screen fine when the camera is first turned on then it goes to the blue screen when the camera is ready to take a picture. Is it worth fixing???? Cost to fix???? Neil
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A85 Digital Camera