Having problems with your Sony Cyber-Shot DSC-W5 Digital Camera ?
Turn off and back on message
\015 It beeps and says turn the power off and on again.\015
If the camera has recently been dropped you may have lens damage that's\015\012preventing it from powering up. If it hasn't been dropped your\015\012problem\015\012may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera - which can\015\012prevent the full power of the batteries from flowing into the camera.\015\012Try this free fix before you do anything else: remove the batteries and\015\012wipe the camera contacts firmly with\015\012a dry cloth (heavy corrosion may require cleaning with a wire brush,\015\012steel wool, or sandpaper). Remove any residue that may have fallen into\015\012the battery compartment during cleaning, then clean\015\012the battery contacts, place the batteries back in the camera and give them a full\015\012charge (assuming that you're using rechargeable batteries). This\015\012cleaning clears\015\012the problem about 80% of the time. If it doesn't work for you, it may be time to replace the batteries,or the\015\012camera may have\015\012a problem that requires professional repair.
Repair Help & Product Troubleshooting for Sony Cyber-Shot DSC-W5 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?
I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera
Turned camera on gives error message to turn off and back on again . No matter how many times we turn off and on it won't clear the message. Took battery out.put back in. Message still there. Also len
Camera was probably dropped. Motorized autofocus lens was probably damaged when dropped. It doesn't get more of a big deal than this. Depending on age of camera, it may be a ''wipe-out.'' Ps... I'm saying ''probably'' dropped because I did ... Digital Cameras
Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???
Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera
Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res
Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera
Everytime I turn camera on it displays a message of turn power off and back on. Can you help me I have taken battery out, and put back in, but still shows the same message.
CCD FAILURE call Sony for FREE REPAIRS ask them abt BAD CCDpls rate me well ... Sony Cyber-shot DSC-W80 Digital Camera
My Lumix DMC-FX8 shows me the message turn off then turn back on again for some reason my flash stopped working completly. and randomly it tell me to "please turn off, then turn back on" i tried everything. HELP I'm having a similar problem with my Lumix DMC-FX01. Movie taking won't work either. I don't if the camera might have gotten some moisture in it or what. Any suggestions?
I had this problem on the weekend! I fixed it with a more archaic method. When it says turn the camera off and then on again, the lens is stuck out. It only goes back in when I turned the camera off and then on for a brief second, and then pops out a ... Panasonic Lumix DMC-FX01 Digital Camera
I have the same problem with my Lumix DMC-TZ3 lens error states "Turn off camera and then turn back on" Though my lens tries to adjust then stops. The power stays on with the error message. Til I turn it off .The lens still does not retract. Now when I turn it back on the lens will do the same thing. I don't think its the lens. How would someone repair or replace firmware. Can it be done over the net?
Of course it's the lens. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most ... Panasonic Lumix DMC-TZ3 Digital Camera
There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message
OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras
My Sony DSC-W30 has a problem. When turned on the screen picture rarely can be seen. It is either completely dark and a picture taken will also turn out dark and unseen. Sometimes the screen will turn on and off many times and then turn dark. Sometimes I can smack it on my hand and it will go black or come back on. The anti-shake button sometimes allows it to come back on. I do not have any screen messages and all the other features seem to work but in a dark unusable screen.
Sounds like a loose LCD connector. It does not sound like a image sensory problem to me. You will have to disassemble it , remove the connector cable then replug it back into the panel and that should do the trick. However I suggest that you take th ... Digital Cameras
I have a fujifilm finepix ax560. when i turn it on, i get a message to turn off the camera and turn it back on again. also the lens is stuck in the open position.
... Fuji Digital Cameras
Suddenly I keep getting the message "please turn camera off and back on again" but nothing happens when I do I just get the message again. I can turn the dial to view pictures but if the dual is turne
Lumix DMC-FX500 ....same Problem, the lense would not drive in when i turned the cam off, instead it was doing so when i turned it on and 5 sec after i got the massage " turn camera off and then on again" , so after reading the comment from guitartis ... Panasonic Lumix DMC-FZ20 Digital Camera
I took my CF card out to get photos, went to put it back in and the screen read "There is a problem with CF card. Replace the CF card." I didn't think there was a problem with the card. But I replaced it anyway. Same message. I tried to format the new card and a message read err 99 turn it off and on and reinstall battery & put it back. I did all of that. Same message about the CF card.
Your CF pins in the camera are most likely bent/broken. This is a very common problem. Most repair shops will charge $150-$200 to repair this.\015\012\015\012Hope this helps.\015\012\015\012Wes ... Canon Rebel XT / EOS 350D Digital Camera
When turning on the camera a message comes up reading " Turn the power off and on again" and the lens seems to be struggling to open. When I turn off the camera & then back on the same message comes up everytime, please help !
Have you tryed brand new battertys ... Sony Cyber-shot DSC-W170 Digital Camera
When i turn my camera on it displays an error message "turn the power off and on again" when i turn it off and back on - it shows the same message
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras
When i turn the camera on the lens pops out and retracts a few times then I get a message to turn the camera off and back on. I do that and the lens retracts and pops back out and will not go back in.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ3 Digital Camera
It keeps doing this when trying to turn on lens comes out then go's rite back in. message on the back of the screen says turn camera of and back on again.
Remove battery while lens is out. try reseting the cam usually near batt need paperclip to push reset. if the lens makes grinding noise lens assembly gears are done. flat rate from sony is usually close to 80% of what you paid for cam. ... Sony Digital Cameras
'Turn camera off and turn back on' message
TRY DROPPING THE CAMERA -- YOU HAVE NOTHING TO LOSE!\015\012\015\012I was heartbroken to learn that my Lumix DMC-TZ1, which I purchased 2-3 years ago, had died -- right during my daughter's dance recital, for seemingly no reason. Tonight ... Panasonic Lumix DMC-TZ1 Digital Camera
Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on
Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera
Hi my lumix dmc-tz1 camera is not working properly. After being turned on for a few seconds a message comes on and tells me to turn the camera off and then back on. If you do this it will repeat the message again after a few swconds. It does not do this when in replay mode. any help would be appreciated. Thank you
This message appears when force has been applied to the lens. You may need service. ... Digital Cameras
When I recently turned on my camera (D-630 Zoom) to take a picture, I got the message titled Card Setup, with two options "Power off" and "Format". I turned the camera off, took out the memory card (1GB) and put it back in, as I did the last (and only) time this happened, about two years ago. But it has not worked, and I have been getting this message with the two options for a few days. Any ideas? Thank you.
If this exact card has worked in the camera before, chances are it has gone bad. Typically, if the camera says to format the card it is because it does not recognize the card. The only reason this would happen is if the card is unreadable from malfun ... Olympus D-630 Zoom Digital Camera
Have a Panasonic DMC-FS15 and get message saying "turn off and back on" followed by "system error (focus)" Have tried taking battery out for length of time and making sure charged, blew on connections for both battery & memory card - still get the same message, plus the lens goes in and out but doesn't go in when camera turned off.
I have this exact problem. I note, your issue is happening at the same time. Weird.\015\012\015\012Tried a variety of other "fixes" but none seemed to solve this issue. Thoughts?\015\012 ... Panasonic Lumix DMC-FS15 Digital Camera
Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.
*&%[email protected]#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera
Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!
I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera
Lens error The lens on my Sanyo VPC-E760 will not close. I was not dropped, I was using it to take a picture and turned it off, but the lens never retracted. Now when I turn it back on, it is stuck in zoom mode and give an lens error message when I try to zoom back out, then it shuts itself off. Battery is fully charged. Any suggestions?
Hey jennbrady24,\015\012 What is most likely causing the lens error is that something is obstructing the movement of the lens (i.e. sand). I would first try removing the batteries and the memory card and waiting at le ... Digital Cameras
When I turn the camera on I get a message ''Lens error, restart camera'' The camera automatically shuts off and when I turn it back on the same message appears
HiWhat you are seeing is a generic message that means there is\015\012some sort of problem with the lens, it could happen in many different\015\012ways such as sand or dirt in the lens gears.A couple solutions would be to eith ... Canon PowerShot SD1000 Digital Camera