Having problems with your Sony Cyber-shot DSC-W70 Digital Camera ?

I get an access message, then it says to turn off and on. Then does the same thing.


Answers :

You should have dropped your camera hard. try tapping the device while the message pops up. if it works you are lucky one, if not take it to the nearest service centre to be handled by a pro.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W70 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?


... Kodak EasyShare CX6200 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I have a Sony cyber-shot dsc-w30. When I turn it on the lens goes in and out, I get a message on the screen saying "access" then I get a message saying "turn power off and on again".


Sony maks good products and stand behind they product, but they do have a problem with the batteries , change the battery and i bet u will not have that problem ... Sony Cyber-shot DSC-W30 Digital Camera

I get an access message, then it says to turn off and on. Then does the same thing.


You should have dropped your camera hard. try tapping the device while the message pops up. if it works you are lucky one, if not take it to the nearest service centre to be handled by a pro. ... Sony Cyber-shot DSC-W70 Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

When I turn the power on my Sony DSC-P200, a message comes up "access" which fades out. Then it clicks several times and then another message pops up saying "turn power off and on again". I get the same sequence when I turn it off and on again. Any suggestions on correcting the problem?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Sony Cyber-Shot DSC-P200 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara


Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera

My cannon rebel will not take picture or go to the menu the only thing it will do is turn on. And when i turn it on a message pops up that says "shooting is not possible. Turn the power switch to off and on again or re-install the battery." I have tried turning the camera on and off and reinstalling the battery multiple times but nothing works. Do i have to take my camera to a camera shop to get fixed or could i do something at home to fix it??


I think either shutter unit or cmos unit faulty. you cant fix at home you have take to canon repaired centre ... Canon EOS Rebel XSi Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work. Any sugestions?


One thing to test before going to repair, make sure you are using a fully charged and correct battery for your camera.\015\012If so, the camera will need repair. This is a common problem and can be fixed. Teleplan Camera Repair does a great job ... Sony Cyber-shot DSC-W30 Digital Camera

I turn on the camera and the lens pops out, but the screen just says "access" and then "Turn the power off and on again". I do so, and the same thing happens. Repeat. I can still view the pictures on the camera, but can't get past the screen errors to take more pictures. Any advice?


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, ... Sony Cyber-shot DSC-N1 Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Sony Cyber-shot DSC-W30 Digital Camera

When starting the camera, I get a black screen that says "Access". The lens pops in and out several times. Then the message, while the lens is out, is "Turn the power off and on again". Help.


I'll forward a link to a page where you can view the information to troubleshoot \012this issue.\012\012\012Please click on the link to view the troubleshooting steps then follow all the steps and check if that helps.\012\012\012 ... Sony Cyber-shot DSC-W50 Digital Camera

When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!


When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera

Access problem When I turn the camera on, all I get is the message "access" followed by another message to "turn off and on again". When I turn off and on as it said, all it does is recycling the same messages again and again and again..


... Sony Cyber-shot DSC-W55 Digital Camera

Getting access I turn the camera on, then the word access appears on the screen, then it says to turn the camera off and on again. it keeps repeating this each time you turn the camera on. How do I get pass this and be able to use the camera???


Gently hold the lens when you first turn it on to prevent it from going back in the camera. That worked for me. ... Sony Cyber-shot DSC-W30 Digital Camera

Getting a "no access" message on the back of my Panasonic MDC-LX3 cameramac. When I connect the cmera and the usb port I then click for pc and I get a message on the back of the camera that says no a


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or conn ... Panasonic Lumix DMC-LX3 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

When you turn it on the lens pops out, and retracts and pops out. can not take pictures message says access then eventually the message says turn off


There are a number of potential causes but the most likely one is that either the MemoryStick has had the protection switch turned on. To check, remove the MemoryStick and look underneath it. There's a small physical switch near the elect ... Sony Cybershot DSC-T200 Digital Camera

Have a Panasonic DMC-FS15 and get message saying "turn off and back on" followed by "system error (focus)" Have tried taking battery out for length of time and making sure charged, blew on connections for both battery & memory card - still get the same message, plus the lens goes in and out but doesn't go in when camera turned off.


I have this exact problem. I note, your issue is happening at the same time. Weird.\015\012\015\012Tried a variety of other "fixes" but none seemed to solve this issue. Thoughts?\015\012 ... Panasonic Lumix DMC-FS15 Digital Camera

When it is turned on a message saying "access" appears then a message saying "turn the power off and on again" . the whole time this is happening the lens moves in and out


Problem in lens unit repair or replace it ... Sony Cyber-shot DSC-W55 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

ACCESS??? When I turn on my camera, I get a blank screen that says "Access". The lens moves in and out several times on its own and then after a moment, tha camera beeps and says to turn off and on again. I've done this...the problem still exists!


1. Please make sure that you're using a fully charged battery.2. Please try Initializing the Camera. To initialize the Camera.First, press the Menu button on the Camera to display the Menu items.Then, select the SETUP option under t ... Sony Cyber-shot DSC-W70 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Sony DSC-S600 Sorrry! What happens is this:- Turn camera on,Cybershot screen opens up with musical jingle then it will say "Access" then another screen opens up saying "Turn power off and on again". Sometimes you don't get the "Access" and it will go straight into the "Power off and on again" screen. Tried this - no good. Changed batteries for fully charged brand new 2700mAh NIMH - 1.2V Uniross - still no good ! Any advice would be appreciated. Regards


If you have a memory card in the camera, take it out before turning the camera on ... Sony Cyber-shot DSC-S600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3627 seconds