Having problems with your Sony Cyber-shot DSC-W70 Digital Camera ?
INVALID Macro When I attempt to take a macro shot, the message - Invalid Macro - appears.
Select Macro option ON and try.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W70 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
INVALID Macro When I attempt to take a macro shot, the message - Invalid Macro - appears.
Select Macro option ON and try. ... Sony Cyber-shot DSC-W70 Digital Camera
Kodak Z1015 Brand new Kodak Z1015 camera. I take three shots and a message appears on the screen saying "PROCESSING". At this time the camera is inoperable. 40 seconds later the message goes and I can take another three or four shots, then same all over again. Kodak as much use as an ashtray on a motorbike. They say I must take a download from the Easyshare software, but that won't work. Any suggestions? Cheers, Dave Watts.
Have you tried downloading updated firmware. Also this camera is slow in processing photos(especially if you use the Smart Capture mode. Hope that helps ... Kodak EasyShare Z1015 IS Digital Camera
Hi, I have the Sony Cyber Shot DSC-W130 digital camera - whilst away on holiday a message appears when I turn on the camera "turn power off and on again". I have done so many times but it still comes up with the same message - hence not allowing me to take any pictures. I can view existing images through the window and I can download them fine - I just can't take any new ones. There is plenty of space on the card and a full battery. Any suggestions?
Hi. Yes. turn it on and go to the menu. find reset and reset the camera. this will return it to factory settings.\012\012if you can't get into the menu or if the steps above do not solve the problem do what is called a hard reset. Re ... Sony Cyber-shot DSC-W100 Digital Camera
I have a new (Dec., 2009) D90. This morning I discovered that I had an "Err" message and a "CHA" message. Both were on the LCD panel on the top of the camera. I was not able to turn the camera off, and the only way to turn it off was to take out the battery. Upon reinserting the battery, everything appeared normal, but after taking one shot the problem reappeared. The interesting thing was that I took the camera body to a Nikon certified shop in New York, and they tried it with a different lens,
The Nikon user manual says on Page 256 that the ERR message indicates a camera malfunction and to clear it, you must release the shutter. \012\012 I have found on my D-90 that I can usually release the shutter by turning the camera off and ba ... Nikon D90 Digital Camera with 18-105mm lens
I have a Fiji Finepix Z20fd camera, and have approx 350 photos on the memory. Yesterday the message "memory full" appeared when i tried to take a photo so naturally i attempted to delete a some to make more space. However, i could not access any of the pixs that had been saved and they are not on the internal memory. Have they been deleted?? A select few photo's (18) are still showing but they have not been protected or anything so I dont know why some have saved while the majority are missing?
Having pics on both the internal memory and a memory card is asking for trouble. Take out the card and download the internal memory to your computer. Then, go into the menu and find "format" and erase the internal memory. Then, download all the pics ... Fuji Finepix Z20fd Digital Camera
It doesn't allow me to take a shot err message appears
Make sure you charge up your battery! ... Nikon D70s Digital Camera
Hi , I bought an old Nikon Coolpix 4300 today from a Kijiji Seller. I was trying to take macro pictures. After couple of shots camera gave " Please wait for camera to finish recording " message and turn ON/OFF itself. What kind of problem would be ?
Welcome to FixYa.\012\012Hi, \012\012Possible reason why do you get an error " Please wait for camera to finish recording " is accidentally you turn off the camera, or new mode was selected while images are bein ... Nikon Digital Cameras
I am using Olympus Evolt-e-300 dslr for the last 4 years until recently occurs a problem,after taking a shot,black screen with message D:3C85 appears and read/write lamp with red light blinks continuously till camera was turned off and again on,although image was record I update the camera firmware through olympus website but to no use,it is still there,I also check the memory card it is perfectly fine(Sandisk Ultra 4GB 30mb/sec read/write speed) please advise what to do???
Hi,This is a common problem and discussed many times in different forums.This issue has been there for a while. This problem is related with the shutter and gear assembly. No doubt you would see many threads where either firmware update o ... Digital Cameras
Downloading pictures USB Mode Mass Storage Memory Stick My pictures will not down load on my computer? I can still take pictures but the above message appears on the screen when I attempt to download?
Can you try it on another pc? Try to connect to a different usb port. Try a different cable. ... Sony Cyber-shot DSC-T10 Digital Camera
Shots taken Hi there, Please could you help everytime i take a shot a display / information about the shot taken appears on screen, it makes it difficcult to see the shot i've taken. How can i stop this display from appearing in the window everytime i take a shot? Thank you for your help.
It is useful for the pro to know the settings automatically at every exposure.But if you dont like you can avoid it by going through the menu.You select "No" to display info or preview ... Nikon D40x Digital Camera
Nikon Coolpix S220 Error Message after taking a shot: Please wait until the camera finishes recording. This message won't come off and you have to open the battery and close it again to take another shot. Is this a camera fault? Only purchased last month.,..
... Nikon Coolpix S220 - Aqua Green 2.5" LCD Digital Camera
Olympus D-435 Our camera has been working fine until last week when we started getting this error message - memory full on a blue screen when we had taken only one photo (and deleted all previous photos). Thinking there was a problem with the memory card, we removed it and used only the camera's internal memory which worked for a short while - allowing us to take 12 shots - but now it will only let us take 1 shot before giving us the error message. Is there anything I can do? Many thanks
You can try updating the firmware of the camera since this is not a problem with the memory card its with the camera itself you can check Olympus web site for software update on this.Hope that helps....... ... Digital Cameras
Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?
Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera
Horizontal lines appeared when I attempted to take a photo. Camera would not take photo. NOW, no lines appear, NO image in screen, and will not take a photo. Batteries are tested and fresh. Photo lens opens and retracts on demand and during power-save.
Please see the following comment: ... Canon PowerShot A95 Digital Camera
Sony cyber-shot DSC-W210. On/off button does not work, but I can turn it on using the play button. Press the play button again to get to picture taking mode, but it will not take pictures. Then I get the E:91:01 error message that so many people seem to be talking about. I can remove this message by 'initialising' through the menu, but can't take pictures. I've also tried removing the battery, leaving for a while, then replacing, but to no avail. People seem to think this is a software prob
... Digital Cameras
Turn the power off and on again....this is what appeared after i download some pictures to my computer for the first time. When I do this the same words appear on the screen and I am unable to take any pictures When I turn on my Cybershot DCS W90, A message sayes 'turn the power off and on again' the lens does not open and I can't take photos but can see photos stored on memory card.... what do I need to do to fix this?
I have a Sony P32. Found the answer on another board'\015\012Hit the front of the camera where the lens is on carpet a couple of times. I jars the problem loose ... Sony Cyber-shot DSC-W100 Digital Camera
When i turn on my fotocamera a message appears telling me to turn off the camera and turn on again..i do this but the message always appears..all functions of fotocamera are ok,but it doesn't take photoes..please help me
HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Sony Cyber-shot DSC-W170 Digital Camera
Sdcard protect: when I plugg on camera an error message appears on screen " SDcard is protected " I tried to change SDcard and the same message related to sdcard appears . I can not unprotect pictures or /and format sdcard ; format or/and unprotect menus are not accesible ( they are in grey on screen ) So consequently I can not take any picture with my camera Could you help me
SD and SDHC cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. ... Intova CP8 Digital Camera
WRITE PROJECT WHEN I CLICK ON THE CAM ICON TO TAKE PICS, WRITE RPOJECT APPEARS ON THE LCD. NO SUBJECTS APPEAR. I CANT TAKE SHOTS.
The camera card may be in the "lock" possition, if its an SD card take it out check this, if you have no SD card check the camera's menuregards and ... Olympus Camedia C-770 Digital Camera
Samsung camcorder VP-D6050i When attempting to record on DV cassette LCD shows"eject" and a flashing message Uppword arrow .. L In attempting to replace DV cassette holder opens but no upward movement to take out the cassette. It is jamed in position. Similar LCD message when in play mode.
First off how long have you owned the camcorder and how long have you had this problem. Once I get more information I can assist you appropriately.Thank you,Lee ... Digital Cameras
Casio EX -Z600 Suddenly takes photo which appears White on screen. Occasionaly takes normal photo and more often than not shots taken indoors appear normall.. Using Snapshot setting
The camera is set to have the ISO (light sensitivity toward the camera) to be manual. The ISO is too high (above 400).You have to accommodate the ISO, or diaphragm (closing) of the camera\015\012to let in less light, and the picture is no ... Casio Digital Cameras
My DMC_FX500 When in a record mode after about 10 seconds the LCD comes up withe the message ... "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures I Can take pictures within that 10 seconds Only. Any ideas what might be causing this message to appear? I Have "dampened" a cotton earbud with Isoproply alcohol and cleaned inside the battery comp
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-FX500 Digital Camera
Message: 'Turn the power off and on again' appears on screen but when this is done nothing happens except same message again; Camera will not go into photo taking mode - this message just keeps popping up Any help welcome..
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Sony Cyber-shot DSC-W170 Digital Camera
My Kodak Easyshare V1233 comes on stating "Interna; Memory Filled" I went in and cleaned it. But it seems like I only get 5 pictures that I can take after that. I take the five (the number in the corner states 5 as it goes down to 0 as I take the five shots???? Then I get the Internal Memory Filled message again??? What is going on??? Please help, Pattie
The V1233 has 32MB of internal memory. At 12MP, each image file is probably about 5 or 6MB in size. 32MB of memory will only hold 5 6MB files.\012\012\012To take more pictures, insert a memory card into the card slot. ... Kodak EasyShare V1233 Digital Camera
Hello there, i have had my tz15 for 18 months and have never had a problem it until now. I taking video at the time and then I went to zoom in and the lens started to do so maybe 1x, hesitated then retracted back into the camera as if it had been turned off and a message displayed on the white screen "Please turn camera of then on again". This doesn't work, i can still take photos but when i try to zoom the same thing happens every time. I was taking some shots and video of some electric arc we
I had the same problem. Tried on and off and press every button and it still tells me to "Please turn camera of then on again". I took my SD card out, turn it on in display mode, select menu, go to internal memory, erase all files in the intern ... Panasonic Lumix DMC-TZ15 Digital Camera