Having problems with your Sony Cyber-shot DSC-W80 Digital Camera ?

Turn the power off and on again this does nothing but display the

Answers :



Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

?\302\267 Turn off the camera.

?\302\267 Remove the battery pack.

?\302\267 Press and hold the power button for 30 seconds.

?\302\267 Allow the camera to remain without power for 60 seconds.

?\302\267 Reinsert the battery pack.

?\302\267 Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK. This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.





Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W80 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My samsung s1070 will not turn on. it was working yesterday and i was able to take pictures with it. now when i turn on the power button the camera beeps three times but nothing is visisble on the lcd display. also the lense is fully out even though the camera will not turn on. why is this happening and can you please advise me how i can turn the camera back on so that the display works aswell?

OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Samsung S1070 Digital Camera

I have a Finepix S7000. This camera has been great for the entire time I have had it. Suddenly a day ago, I turn it on and it pretends to "Boot" up....the display comes on with the "Finepix" graphic...the lens "Moves" into position....the "Green" power light on the right grip side come on, (and stays on)....then, Nothing. When I try to turn it off and restart...nothing. The camera will not even turn "off" unless I open the battery hatch, (I put a fresh set in). Please help...I love this camera.

Hello thomas... remove the new batteries and then use the eraser end of a pencil to clean the battery contacts within the battery compartment of the camera. remove all of the eraser debris. reinsert the new batteries and try it again.\015\012 ... Fuji FinePix S7000 Digital Camera

My cybershot camera 7.2[ when i turn it on it reads access and a blank screen, then after a minute or so it displays turn the power off and on again. when i do so, nothings happens still the same problem. any resolutions?

Lens problem. Contact your local Sony service center or if they ask too much, feel free to contact me at [email protected] work in a Sony service center.Tom ... Digital Cameras

Hi, my Mustek dig. camera is not displaying anything. Having bought this about a year ago and not really using it, I don't remember if it came with a charger or just the USB cable. Anyway, I plugged in the USB cable and turned on the cam, but nothing popped out on my PC. The power button is still on (blue light) and does not turn off. But I still can not see anything - the cam is dark. Please let me know how I can start using it again. Thank you

Hi,\015\012Just tap on the sides of camera when you switch on it . There is definitely a loose contact between the screen and circuit board inside it . You confirm it to check that you are facing this problem due to bad connector . If you still ... Digital Cameras

I need some help to repair my Sony Cybershot DSC W50 camera. When you turn the camera on, it displays 'Access' for about 30 seconds, during which time the lens zooms in and out. Then it says 'Turn the power off and on again'. Nothing has happened to the camera - it has not been dropped and this fault just suddenly started. What can I do about this? I have had it just over a year. I’d be really grateful for any support! Thank you! Clare

When the camera is switched on it turns the lense out to a certain position and locks , but if due to any reason if the lense does not reaches to its proper position it retracts back and tries again 2 or 3 times, and then the movement haults and pr ... Digital Cameras

Put new batteries in camera, turned power on but the camera lens doesn't open. Only the green light flashes a couple times then starts blinking red then shuts off. nothing displays on the screen

You must use the right batteries ... Kodak EasyShare C533 Digital Camera

Coolpix L18: The LCD screen is broken; just displays a large black "blob" on a white background. Would this prevent all other camera operations? When the camera is turned on, the green power light flashes, but nothing else seems to work. Camera will "beep" when shutter button is pressed, but lens never opens. Is this a LCD issue, or are there other problems as well?

... Nikon COOLPIX L18 Digital Camera

Turn the power off and on again this does nothing but display the

Hi, \012 \012 Error: TURN ... Sony Cyber-shot DSC-W80 Digital Camera

Lens not moving the display shows - turn the power off and on again...but nothing happens

This is a typical drop defekt, or a pressur on the camera lens. if you have the camera in the shorts and sitting one the camera or you have make any pressure on the camera lens. its very probably that you must change the lens bloc. have you specifi ... Sony Cyber-shot DSC-W110 Digital Camera

Olympus fe-310 camera won't turn on. The power light flashes and there are three audible beeps. The display screen shows nothing and the lens is open.

... Digital Cameras

Hi there, my Samsung WB500 camera can not get it's lens closed. It stands open all the time and is doing nothing. When I turn the power on, it 3 times makes a hard noise 'peep peep peep', no display and then shut itself down. What can it be? Can I solve the problem myself? Thank you! greetings Remco

This is a common problem with cameras. They can get bumped when the lens is out, and that can jam the gear assembly, or break a gear. I could run down all the things you can try to free it up, but there is a better web page that deals with issue ... Digital Cameras

My camera problem is :when i start or turn on the power button of camera a massage is displayed which is "Turn off the power and on again " i followed the same but again when i am turning the power on again ,same massage is being displayed in camera . camera model is :SONY DSC-W180 cyber shot please help me out soon.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W180 Digital Camera

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.

The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho

I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

My D-7 will not power up...when turn it on the power light weakly flickers (as well as the power sound) for only sec then nothing. Have cleaned battery connections, used charged batteries and even to

Sounds like electrolytic capacitor dried up needs curing, which is power on capacitor and left it absorb some moisture in humidity on power. Some time a few minutes, hard cases may take a few days. ... Konica Minolta Digital Cameras

I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks

Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera

Cybershot will not power up it has been charged and i tried removing the sd card and battery then reinstalling them and still no power. It tried to turn on but shut down. Its giving the error messag too Turn off and turn back on!!! and when it does nothing.

... Sony Cyber-shot DSC-W170 Digital Camera

When I turn my Nikon D40 on, the shooting information display is on the screen. The camera will not take a picture nor can I get this display off the screen. I have tried everything- turned it on and off, removed the battery, pressed reset, etc and nothing will make the shooting information display go away.

Hi\015\012I am a camera tech. I would like to help you out. I think I told you to use toggle key on the back of camera. If not working, I need you describe more how it does not work.(can it take picture and store the picture file in sd memory card? ... Digital Cameras

When i turn on the power.....it shows access on the screen and then asks to turn the power off and on again......i follow it but nothing happens ...it keeps on repeating it..

Turn on take the end of the lens eand gently pull and twist you may hear it click but dont force it then turn off and on again and this may solve the problem. ... Sony Cyber-shot DSC-W55 Digital Camera

Battery problem This morning I turned on my brand new Nikon Coolpix 5400 and got nothing on the screen. pushed some buttons and still nothing. Went to turn it off and it won't. The lens stays extended and the power light is still on. I don't know if maybe the batteries are so low they can't do anything, but I was under the impression that the camera had an indicator for the batteries really needing to be recharged. The low battery light was on last night, but I haven't seen need to be recharged

Some of these cameras go from "low" to "no" very quickly. The electronics are more sensitive to available voltage than the mechanicals and it doesn't take full voltage to keep an led lit or to retract the lens. But the cpu shuts down. I would have ex ... Nikon Coolpix 5400 Digital Camera

Upon power up, display screen says 'access', lens goes in and out several times and then the camera beeps and display says 'turn the power off and on again'

Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Sony Cyber-shot DSC-W70 Digital Camera

I have a Sony Cybershot DSC-W80 that's acting up. When I turn it on, the zoom/lens moves in and out four times. Then, the screen displays "Turn the power off and on again." When the power is shut off the zoom/lens move in and out two times before shutting off. This occurs every time.

Does it also show a lens error or any E18 error??have you dropped it anywhere recently??did you try a hard reset? ... Digital Cameras

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.

... Canon PowerShot A400 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2190 seconds