Having problems with your Sony Cybershot DSC-H3 Digital Camera ?

Changeing resolution Have the resolution set at 72 ppi... how do I change it to a higher one-- at least 200 ppi (@ 6" x 4")?


Answers :

On the back of the camera, push "Menu."
A menu screen comes up.

The first option is the one you're looking for:
"Image Size."

UNDER that option, the first sub-option is "8 M," the next is "3:2," the next is "5 M" and so on. That "M" is "Mega Pixels, or "million pixels." The size of the file will be measured in megapixels, and each "pixel" requires 3 Bytes of memory to define it. (A "pixel" is like one tile in a mosaic tile image.)

You change the options and sub-options in the menu by using the round donut-shaped control on the camera back. On the outside of the "donut" there are arrowheads pointing Up, Down, Left and Right. When you push the donut in the spot next to an arrowhead, you go whichever way the arrowhead points. Up goes through the MAIN options, right/left takes you through the SUB-options under the main option.
\015\012
Change from a lower file size to a higher one by going left and right through the "Image Size" sub-menu. The biggest file size is "8 M" and I suspect the smallest is at the extreme opposite side of the list.

Someone apparently set your camera, maybe before you bought it, to a file size that is as small as possible, so you could fit the maximum number of pictures in the camera. But to get a better image for printing, you need to change to something with more pixels!
Repair Help & Product Troubleshooting for Sony Cybershot DSC-H3 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Changeing resolution Have the resolution set at 72 ppi... how do I change it to a higher one-- at least 200 ppi (@ 6" x 4")?


On the back of the camera, push "Menu." A menu screen comes up.The first option is the one you're looking for: "Image Size." UNDER that option, the first sub-option is "8 M," the next is "3:2," the next is "5 M" ... Sony Cybershot DSC-H3 Digital Camera

How do I change pixel settings on olympus SP550UZ canera? We've had this camera for several years and managed to lower the resolution when we first bought it. Now we'd like to increase the pixel setting permanently, but can only manage to change the setting on a 'one by one' photo basis. The manual provides information about the different settings, but not how to make the changes.


Here is the manual with lots of details. It will answer you question: Free download to.http://www.olympusamerica.com/cpg_section/cpg_support_manuals.asp?id=1289 ... Olympus SP-550 UZ Digital Camera

I have the same issue with my d40x. i have tried all the tips on here with no resolution to my prob. one thing i have noticed when i have navigated around the menu is that focus mode is set to AF-A. AF-S and AF-C are greyed out and unavailiable for selection. is this a problem? and if so how could i change them? Many thanks Paul


You're in one of the point&shoot modes. In these modes the camera takes almost complete control of itself and leaves you with very few options. If you want more control over the camera, switch to one of the PSAM modes. The P mode works almost exactly ... Nikon D40x Digital Camera

When I go to walgreens to print my pictures the resolution is horrible, i think i accidentally changed a setting butI'm not sure which one


In the setup menu, you can change the resolution in "picture quality". ... Canon PowerShot SD870 IS Digital Camera

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea


I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

I sent the first one back because i thought it was the camera but the new one is doing the same thing. something about setting the time zone is messed up. it will not set to the proper am or pm. if i set it at 4:30 in the afternoon the time zone time will state 4:30 a.m. and when i exit out to the main screen the time on my camera will have then changed to a.m. instead of p.m. also you cannot set the clock in the camera to 12 a.m. anything. there is no 12 on the a.m. choice of the clock. it will


... Samsung L200 Digital Camera

Resolution problems I have my Cannon XT set at large under quality but no matter what the quality setting is set at all my pictures once downloaded have a PPI of 72. I have tried everything possible but still get only 72 PPI pics. I am using Cannon software to download the pictures and have also tried Adobe. What can I do to fix the problem?


Sometimes if you open up a photo in Photoshop, or another bitmap program, it'll display your photo at 72dpi. That's OK because your photo is likely to also be very large in size. Reduce it's size while at the same time allowing those pixels to crunch ... Canon Rebel XT / EOS 350D Digital Camera

Higher resolution I dont have high enough resolution set i suppose?.. not to sure.. i have a couple photos ive posted on my redbubble photoblog and alot of them are not of high enough resolution and I figured i could do something with my camera to change that!.. maybe changing the pixels or something?.. really i have no clue.. but to sell my photos and make them poster size i REALLY need to know this! Thanks alot


YES ... Canon PowerShot S5 IS Digital Camera

I have a Sony cybershot DSC-W200 12.1 megapixels. It has been working brilliantly, then i turned it on one day and it will not allow me to change any of its settings, even in the manual setting. In auto i can not use flash or micro settings. What has happened and how can i change it back? I have searched through all of its menues and i cant find anything that helps.


Take out the battery and let sit for 10 minutes. reinstall battery and turn back on. everything should be back to normal ... Sony Cybershot DSC-T200 Digital Camera

The photos taken by my Coolpix s70 are consistently blurry. I've changed the resolution to 8M with no improvement. I've tried Auto settings, various scene settings to no avail. Is there another setting I've somehow changed without realizing?


If you don t have a ccd faulty????its probably that you have change the iso. and the iso are to high. contol this selction. if the camera dont have betterement, it s very probably that the problem is in the ccd sensor. you can search on th ... Digital Cameras

I changed the batteries in my S2IS powershot to the re-chargeable canon NiMH and purchased a second set of energizer NiMH batteries. When we changed to the new ones, neither set works! The camera won't turn on.


Use enolop batt white color ... Canon PowerShot S2 IS Digital Camera

I have had my S9600 for 4 years, for most of that time, when i changed the batteries, all my settings remained the same. Now, when i change the batteries, every setting has returned to factory standard (stupid beeps and whirring noises, no date etc) and i have to reset everything. The user manual has no mention of an internal battery, but i figure there must be one and it now needs replacing. How do I do this?


My camera has refused to power up despite fresh batteries - I have had no response. I left it overnight as suggested in the manual - but still nothing. It hasn't been used for a few months and was left without batteries for fear of leaking. Any ideas ... Fuji Finepix S9600 Digital Camera

Hello. I bought my Powershot SX1 IS in April 2010, and have never felt I could get good photos with it. The 'noise' seems bad, when I playback and zoom in just one notch, definately worse, the more I zoom. The color is often poor, and the focus on close-ups is not sharp. Would you say this is the best this camera can do, or would you say there is something wrong with this particular one. (I always have it set at highest resolution , often 100 ISO, try the set of three exposures to get diffe


Hi,You will get more information about this camera on the link belowReview LinkAnd yes, your doubt is correct. It is because of the ... Canon PowerShot SX100 IS Digital Camera

Trail sentry HI People; I have a 11-9000C and after setting it up I get the 0 then I'm waiting on the first shot to see if the camera is working. In about one minute the display shows SLP then shuts down. I can push the menu button and it come back to 0 setting like the beginning. Have you ever seen this before? Thanks Laurent


The SLP stands for sleep mode make sure that you have a san disk memory card this card is what you should use in a bushnell trail camera.Do not go above what gig they tell you in your manual,try a set of new copper top alkaline duraclells.If your mem ... Bushnell 11-9000 Digital Camera

Cannot find the resolution setting . my photos are not clear when i print them large. i have been told to change the resolution setting but i cannot find it on the sony cybershot dcs-t20 camera


Make sure you set your camera at 8M when you take pictures, however when you do this you will not be able to store as many pics on your memory stick, The higher the resolution the clearer and larger you can print. If your Camera is set at 3M then whe ... Sony Cyber-shot DSC-T20 Digital Camera

Photos missing Hi I recently changed the resolution setting on my camera, and then lost access to photos on my memory card taken prior to the resolution change. Is there any way I can access those photos? Please help!


I suggest that you try this canon photo recovery solution\012http://www.asoftech.com/articles/recover-deleted-photos-canon-camera. ... Canon PowerShot SD600 Digital Camera

DPI resolution My pictures are always set at 72 dpi no matter what image setting I use. I have friends with much lesser cameras that take better pictures and their dpi settings range from 230 to 300. HOw can I change this setting?


Menu- camera set up- picture quality- \015\012 try to locate picture size using menu button switch. RAW file is the best but it eats too much memory. ... Canon Digital Rebel XT / EOS 350D Body only Digital Camera

I don't understand how to set my new Olympus Pen EPL1 camera on largest size jpeg's without using the RAW setting. What does LF, LN, MN and SN stand for please??? And does one change back to factory settings? Many thanks.


... Digital Cameras

How do I change the resolution on my Panasonic Lumix DMC-FX07? As far as I can tell I have in on maximum resolution and all I get is 72 resolution. Does anyone one know how? thank you -Ad


72? are you talking about DPI? if you are talking about DPI / resolution read this pagehttp://www.rideau-info.com/photos/mythdpi.html ... Panasonic Lumix DMC-FZ2 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in


Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Overexposure, Underexposure I have had my camera (Panasonic Lumix DMC-TZ1) camera for 2 years. Over the past year I have had difficulty with underexposure and overexposure mostly when taking pictures indoors, even with the exposure set to normal (0). I can take a picture of my kids, one of them will be overexposed, the next one underexpsoeed, and if I am lucky, I might get a good one every now and then. Is this fixable? Help! I have two small children and taking good pictures of them is importan


Try this:\015\012\015\012\015\012\015\012\015\012\015\01212-29-2007, 10:17 AM \015\012\015\012\015\012\015\012\015\012\015\012\015\012epuronen ... Panasonic Lumix DMC-TZ1 Digital Camera

Concert settings Hi, I am going to a concert, can you tell me the best settings to have the camera on, when I have it on iA if the subject moves then the picture is blurry, as there will lots of movement I obviously need to change this, also when I used it at my son's school in low light the pictures came out dark. Would it be best for me to do manual settings, if so which one? Thanks Julie


Hey Osfan,\015\012 I will start by saying concert photographs are some of the hardest images to capture successfully. The first thing you probably should do is set the iso to the highest setting possible which on this ... Panasonic Lumix DMC-FZ18K Digital Camera

My Olympus SP-310 has wavy lines in all the pictures. I found a solution before on the internet - it recommended changing one of the settings. However, I can't remember what it was, and I can't find t


If the camera was working fine "before" you made a setting change, try going into the setting and selecting "factory Default" That may correct the setting you may have experimented with. And, make sure your battery is fully charged first! ... Olympus SP-310 Digital Camera

I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef


Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

Change Resolution I send e-bay pictures with fuji A350 the way it came out of box , no problems. I want to send photos to another auction. They say I need Less than 200 KBytes. What and How can I make this happen without changing the setting for e-bay Thank Alan


Okay this file size is very small and even if you could chage the settings on your camera to the lowest , I'm sure the filesaize will still eb too large.\015\012What to do is use a photo editing program such as adobe or maybe even something els ... Fuji FinePix A350 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2092 seconds