Having problems with your Sony Cybershot DSC-T200 Digital Camera ?

Vibrating Camera I have a Sony T2 digital camera which I purchase just over a year ago. It has started vibrating badly when on picture taking mode, but is ok in review. What can be causing this?

Answers :

This is a known issue with the DSC-T20 Cameras.
\015\012Check this link for more information and get it serviced to resolve the issue.

NOTE: (Please confirm the model # of the Camera whether it is DSC-T20 or DSC-T2. )
\015\012Good Luck!!!!!!!!!!
Repair Help & Product Troubleshooting for Sony Cybershot DSC-T200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Vibrating Camera I have a Sony T2 digital camera which I purchase just over a year ago. It has started vibrating badly when on picture taking mode, but is ok in review. What can be causing this?

This is a known issue with the DSC-T20 Cameras.\015\012\015\012Check this link for more information and get it serviced to resolve the issue.\015\012\015\012 ... Sony Cybershot DSC-T200 Digital Camera

Blurry LCD Well, I have recently got a SD400 camera from dell.com. The first thing I noticed was the inaccurate LCD. The picture in the LCD seemed blurry(bad resolutoin, weird coloring) and inaccurate. But, after actually taking the pictures, the picture seemed perfect. (In the review mode and the display right after you take a picture.) Is this a problem? This is my first digital camera, thus I had no previous experience with camera LCD. Or is this normal, without flash, everything is suppose

Hey i found this site that is great on how to change a LCD for the camera\015\012\015\012http://digitalcamerarepair.googlepages.com ... Canon PowerShot SD400 / IXUS 50 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu

OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

When Mode switch is set to take pictures or clips, the camera shuts down in less than a second after I turn it on. If the Mode switch is in the far-left position (review pictures already taken), it stays on and I can see all the pics in the camera, but as soon as I switch to picture-taking mode the camera shuts down.

Since u say ur having difficulty reassembling the unit back.... please refer the following.... it shows disassembly procedures for a similar model camera... this is as far the closest i could find to help you reassembling the unit... just apply rever ... Sony Cyber-Shot DSC-S40 Digital Camera

Problem with the Canon PowerShot A630 Digital Camera Turning on camera in picture taking mode has lens going full zoom. In picture review mode no controls work. Out of a sudden I can't preview anymore, and in camera mode the zoom goes to 16X and I can't take pictures. Just doesn't work. I did not drop it or harm it in anyway.....please help.

This is going to be an internal problem. It sounds like you might have two problems going on. The zoom switch might be broken, and jammed in the on position. As for previewing your pictures, this could be a slightly loose ribbon connector from ... Canon PowerShot A630 Digital Camera

I am using a sony DSC-T1, when in the camera mode the screen is dark except for the numbers and dots that appear for camera operations. I can not take a picture of anything. I can review photos, when I do take a picture with the screen dark and I review I just get darkness.

CCD imager chip is defective in your Sony DSC-T1 camera that is why you see no image in lcd screen.Replace ccd imager chip to fix the camera problem. Local camera repair shop will help you to replace bad part if you have no experience of electr ... Sony Cyber-Shot DSC-T1 Digital Camera

Broken My camera will turn on in the picture review mode but it will not stay on when switched to the picture taking mode. It will also not turn on in the picture taking mode. I was told that aI had to re-format my memory disc, but I don't think that will fix the problem. Please help. Patrick

If there is no error displayed, you've got weak batteries. If they're chargeable, charge them AT LEAST 14 hours then try. If the batteries are a couple years old, try new rechargeables. ... Sony Cyber-Shot DSC-P100 Digital Camera

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t

My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.

These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?

This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera

We cannot get camera to enter picture taking mode. Lens will not extend when opened up. Batteries are fine and camera works in picture review mode

... Olympus Camedia D-520 Zoom Digital Camera

Camera vibration I've had the camera for over a year. Some time ago I started to notice the vibration problem, but it would stop after a few seconds. It has been gradually getting worse. This past weekend I was using it to take pictures when it started vibrating and would not stop unless I turned off the camera or put it into view mode. Right now it is working but I'm worried the same thing will happen in the future. Don't know if it is something I need to get fixed or if it is more worthwh

We had this problem with my wife's T300 and recently had it repaired under insurance - a new pcb was required. ... Sony Cyber-shot DSC-T300 Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.

You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

I have a Kodak Easyshare z8121s Digital Camera and it is going thru brand new batteries in less than a day and it scrolls thru the digital picture settings by itself. When I try to review my pictures it will not stay in that mode, it goes back to the picture taking mode by itself also.

What a piece of **** camera. You need to own a battery srore or manufacture your own batteries ... Kodak Easyshare Z812-IS Digital Zoom Digital Camera

I just got my camera for christmas. The review mode is working normally, but I cannot get it to take pictures. Last time I used the camera was a few weeks ago, and it worked fine. When I chance it to the camera mode and press on, olympus appears on the screen, it makes a few sounds, then turns off.

HelloOk the problem you are experiecing is a lens error. In practice we test a lens error by either looking at the error code displayed, or, putting the camera in review mode.If the camera works in review mode, where the lens ... Olympus Stylus 720 SW Digital Camera

When I turn my camera on a message says lens error 16 and shuts off, if i want to take a picture. If I put the camera in play mode to review pictures its says lens error 21 but lets me look at the pictures.

This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sanyo VPC-E760 Digital Camera

When in a record mode LCD says to "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures but cannot take pictures. Any ideas what might be causing this message to appear?

You are experiencing a media miscommunication. This due to low or incorrect amount of voltage to the cameras coding circuits.Take a Q-Tip "dampened" with rubbing alcohol and clean inside the battery compartment well. Do the battery contacts and the c ... Panasonic Lumix DMC-FX500 Digital Camera

I have a Kodak M531 that stopped taking pictures. I can review pictures on the SD card but in camera mode I get no display on the LC screen. Can this be fix of is the camera shot?

Yes you can fix. the problem is you have two options a) do it yourself or b) go to the repair shop where you buy it.Try to replace the batteries, and proof, put adapter and see if working, if not go to the mentioned before.God bless you ... Kodak M531 Digital Camera

My DMC_FX500 When in a record mode after about 10 seconds the LCD comes up withe the message ... "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures I Can take pictures within that 10 seconds Only. Any ideas what might be causing this message to appear? I Have "dampened" a cotton earbud with Isoproply alcohol and cleaned inside the battery comp

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-FX500 Digital Camera

When you turn my camera on it has a black screen and you cannot take pictures. You can review pictures and see the different menu modes, but the screen is otherwise black. The camera is otherwise in good condition and is only three years old.

Gennylou, sorry I didn't see your post sooner.\015\012\015\012This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warra ... Canon PowerShot S1 IS Digital Camera

When I open the lens cover in the take picture mode the whole camera vibrates continuously. The camera will be fine for a few shots and then when I open it it vibrates (literally shakes)

There is probably no user solution, it seems that optical lens vibration stabilizer is wrong/damaged, the only solution is to replace it. ... Sony Cyber-shot DSC-T10 Digital Camera

Zoom Error While taking a picture of my daughter at Disneyland, I accidently dropped my camera, while in picture mode. It must have been about a 3 foot fall. It landed on the extended lense causing it to disalign itself. I attempted to push lens back into it's proper alignment. Now that I turn on the camera, I automatically get a "Zoom Error" fault in the LCD screen. Is it possible for me to fix it or what do you suggest? Thank you for your time and efforts..... Sincerely Alex Z.

Lens unit has to come out to see whether the problem can be sorted out without spares going in. But unfortunately you have to go from the back on this model which means disconnecting and removing all 3 pc boards and the LCD screen and then loosening ... Fuji FinePix S7000 Digital Camera

Camera lights are on and I can change to review pictures taken and see them but I can only see the black screen with white figures while in take picture mode. the camera clicks but nothing happens. I changed all the batteries even though the low battery light was not on, and it worked for a little while but the next day, I could only see the black screen again.

Your\015\012problem\015\012may be due to corrosion on the battery\015\012contacts inside the camera which can\015\012prevent the full power of the batteries from flowing into the camera.\015\012Try this free fix before you do anything else: remove th ... Canon PowerShot S2 IS Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.

Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?

Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4704 seconds