Having problems with your Sony Cybershot S650 Digital Camera ?

There is a flashing number inside the screen that I cannot remove, and my pictures are not coming out as they used to.,.they are very dark,,.how do I remove this flashing number it says 91:01

Answers :

\015\012Just follow the steps below to remove the error message.
\015\012 Turn off camera.
Remove the battery or the power supply.
Turn the switch to CAMERA for about 30 sec.
Turn the switch to OFF.
Install the battery or power supply.
Turn the switch to MEMORY.
Open the LCD cover and press the RESET button .
You will be prompt to adjust date/time. Do take some pictures.
Hope this helps.
\015\012Thanks for using Fixya.
\015\012Do rate the solution.
Repair Help & Product Troubleshooting for Sony Cybershot S650 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

There is a flashing number inside the screen that I cannot remove, and my pictures are not coming out as they used to.,.they are very dark,,.how do I remove this flashing number it says 91:01

Hi,\015\012\015\012Just follow the steps below to remove the error message.\015\012 Turn off camera. Remove the battery or the power supply. Turn the switch to CAMERA for about 30 sec. Turn the switch to OFF. ... Sony Cybershot S650 Digital Camera

I have a Canon EOS 40D camera. We are having problems with using an external flash. The pictures always come out extremely dark with the external flash. The flash seems to work fine, it flashes brightly. The pictures look fine using the built in flash. The flash is a Promaster but we tried a Canon flash and it did the same thing. The camera store we bought the camera and the flash from says it looks like a synchronization issue and that it is a hardware problem with the boot. Their sugges

I don't know if this will help and this post is two months old. The \015\012camera store may be right that the synchronization is the issue which \015\012tends me to point a finger at the external flash. There are at least \015\012three different fla ... Canon EOS 40D Digital Camera

Flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :( flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :(

I have the same problem...so do you think that it's so expencive to repair?? ... Sony Cyber-shot DSC-W55 Digital Camera

I have a Canon Digital EOS Rebel XT and the built-in flash no longer pops up when needed. This started happening after using a Canon speedlite, but then removing it. I've tried resetting everything, and tried all modes expecting that the ones listed in the manual as using a flash would work, but they dont, it never pops up. I lifted up the flash with my fingernail manually, and then tried taking a picture where a flash was most definitely needed, but it still had a long delay, no flash, and

In addition to resetting all the camera settings you should also choose the "clear all custom functions" option that is also available from the same menu. Once that's done. Put the camera in Full Auto mode and see if the issue is resolved. ... Canon Rebel XT / EOS 350D Digital Camera

There's a circle around the flash symbol so the flash bulb won't go off when you take a picture, well I haven't used the camera for a while and I've forgotten hou to remove the circle so as to use the camera inside so the flash will flash.?

Hello,\015\012\015\012You have the flash disabled.\015\012\015\012What make and model is the camera. You do not give that information in the post.\015\012\015\012Thanks,\015\012\015\012Wayne ... Digital Cameras

Flash Card says Full but 0 images.

Yes, try formatting the card within the camera and then check. ... Canon PowerShot A630 Digital Camera

I have a Pentax K 100 D. I have tried using a Flash Memory card (a Sandisk Ultra 16GB) but without success. The message 'Memory Card Error" is displayed even before I could format it. The card had previously been used to store files from my PC (where it worked perfectly) but the camera could not format it even after I had removed all the files etc by reformatting it in the PC (FAT32). Is there any way I can get to use this flash card in my camera?

Hi Doc.SD cards different in size use different technology. there are design changes introduced at 2GB and 4GB that makes cameras not compatible with all cards.When this camera was introduced, it was compatible with cards up ... Pentax Digital Cameras

We have a new custom build PC from Data Doctors for personal use with Vista 7 and have a Samsung SyncMaster 191t monitor that was previously used for gaming and had a DVI cable. We bought a VGA cable but the Samsung monitor just says Check Signal Cable. We also tried using a VGA to DVI adapter, but that didn't work either. The monitor didn't even say check the signal cable then; only the green monitor light kept flashing. Is there a setting inside the SyncMaster 191t that would be previously set

You have to check the hertz of the monitor, lower the hertz to 60 hrtz and it will be fine ... Digital Cameras

I have a canon 350 powershot and I have used it for awhile. Now when I put the flash card in it says card with a line through it. When I put it into the flash card reader it say the card is not formatted. How do I reformat the card. I don't have a manual. Thanks

Formatting will erase the card. If you're using the card reader built in to the computer, try using a separate card reader that plugs into a USB port . If you can download all the pics, then you can format the card in the camera to get it to work cor ... Canon PowerShot 350 Digital Camera

My Nikon D70 DSLR was fine when last used but after around three weeks when brought out to use again, the LED which signifies writing to the card is flashing - whether the power is on or off. Removing the CF card and reinserting it makes no difference. While this light is flashing the camera will not switch on or show any information in the LCD. It is about three years old and has been faultless until now. Any suggestions?

... Digital Cameras

Hi, I got a new ProSpec 4gb flash card and used it last night in my canon 40d. I forgot to format before I initially used it. Shot lots of great images that I could see on the camera back, but now I am getting the messages - can not create a folder, tried to shoot another image and is says cf card is full, and now I can't review on camera, it says there are no images. Tried Digital Photo recovery software and got nothing. Anything at all I can do? I'm tempted to format now and then see if I can

I do not have a solution, but I do have same problem, or a variation of it: filled my ProSpec 2GB, removed it from my Canon G10 to insert a fresh card, then later reinserted the ProSpec to transfer photos to computer. Several tries, and no go. First ... Canon Digital Cameras

Used Vivitar 70-200 zoom on my K200 Pentax. Nothing but aggravation since. Right now the 18-55 lens it came with is on but shutter button is stuck in down position and my flash wont pop up using the manual "up" button. When I look thru lens and push button, flashing "F" is the only thing there. Removed lens and button would move enough to "click" but would not come up. Put lens back on and nothing! Newbie in the extreme and ready to go back to my MX !!

The issue here is the manual mechinsm is in defect, Your going ot hate me but there is not much I can do over email but to tell you a local camera shop can take care fo this for cheap. Whats going on is the mechism is jammed most of these are spring ... Pentax K200D Digital Camera with 18-55mm lens

My Jazz HDV 205 camcorder will not charge. The booklet says that the light will continually flash until the charge is complete, however, the light only flashes about three times and then just stays red. I can leave the camcorder on the charger for thirty minutes to an hour or even more and no matter the time it just won't turn on. Not to long ago I was using it and it was fine. I whent and put it on the cahrger that day so I could continue to use it and it hasn't charged sense then. This problem

... Digital Cameras

I accidentally used a damaged SD card on my Kodak P712, so it flashed that "error" message. but after that every SD card i used, whether my own or new, it always flash that "error" message now. I't can't read any card and it just stuck on that error screen unless i remove the card

The problem is that your camera will only read SD cards, not SDHC cards. After you damaged the SD card that you've been using for years, you bought a replacement, not noticing that it was SDHC. The new cards don't work, not because they or the camera ... Kodak EasyShare P712 Digital Camera

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.

... Canon PowerShot SX110 IS Digital Camera

I am a 70 yr. old man. My children gave me a Finepix S1500 camera for my birthday. I would really like to start using the camera however I seem to have misplaced or lost the quick start users guide as well as the C/D and full users manual.Can you replace these items for me? Product serial number 9SA08013 F FX-S1500-US C Product code number 4547410086751 Bar code number (factory) 0 74101 48414 4

USB driver (software) and user manual can be downloaded in computer from Fuji Camera Support website.Please click USB Driver to download and instal ... Digital Cameras

When I turn my Nikon Coolpix S70 camera on it says battery exhausted. I thought that meant the battery was dead. I just charged it overnight & it now still says the same thing. I took the battery out & put it back in & now it doesn't say anything the yellow light just flashes. Any assistance would be great. Never been mishandled, dropped, etc. It's in great condition & stays in the case unless used.

Mine says the same thing I have the same camera what did you do? Did you ever get it fixed? ... Nikon COOLPIX S700 Digital Camera

My camera was dropped and since then it won't take pictures using the flash. The screen keeps saying "F 2.8 1/45" while the flash is charging, but never takes a picture. The camera takes pictures fine without the flash. What does this mean?

This means the flash or flash circuitry broke due to the drop. The camera will take pictures as long as the flash is not required. Only resolution is to have the camera repaired, which unfortunately may cost more than the camera is worth. ... Samsung Digimax S630 Digital Camera

When trying to use the shooting functions i get a message that says "not available in these settings". It looks like the macro symbol is in the upper right hand corner. I can't use any of these functions...flash set etc I have an Olympus Stylus 7000

Sounds like you have the macro turned on...turn it off. ... Olympus Stylus 710 Digital Camera

Battery/Power trouble My C-770 is 2 years old and I still have the original L1-10B batterys that came with it. The camera goes through periods of non-use so has not been used excessively. When I put in a newly charged battery the battery indicator says the battery is full, but then take one picture and the light blinks empty and usually dies with the lens out and the ISO numbers still on the screen. I switch the power button into the off position but it generally takes a min before it actuall

Using a little common sense I'd be checking the batteries first. You're going to need a new one sometime anyway so get a new one and try it out. Just make sure your battery charger is working first. It sure sound like battery problems to me. ... Olympus Camedia C-770 Digital Camera

Canon EOS Rebel K2 3000v... bought used. After each shot the battery icon flashes on the LCD screen (the manual says this means the pop up flash mechanism is blocked, it's not) I press the shutter button down half way(as instructed and camera returns to shooting mode) but this happens all over again after each shot. I got to the end of the first roll and it came back completely blank. ?? I'm new to photography so, user error is possible, any ideas on what's wrong? Can I fix it or should I send t

... Digital Cameras

Battery Problems The Canon PowerShot A480 is sucking the life out of the batteries! I get about half a dozen shots and it says I need new batteries - I change to fully-charged ones and as soon as I put them in they are almost gone (that icon is flashing at me). I have used new rechargeble and old ones ... I've used two different rechargers ... I've tried leaving the batteries in until the red light goes out on the charger and I've also tried leaving the batteries in for a day or so past the red

Try not useing recargeables ... Canon PowerShot A480 Digital Camera

I have a cannon rebel xs EOS first I want to get it back to Factory settings how do I do that and secondly when I want to take a pic say at a concert without the flash they turn blurry but if I use the flash then it turns out great

In the setup menu, scroll to "reset" and follow the instructions. Second, when taking pictures at a concert without flash, you need either a tripod (probably not practical) or a monopod (that's what I use). Also, a camera with anti-shake control woul ... Digital Cameras

My nikon coolpix s230 wont let me use the flash when i take pictures the flash lamp just keeps blinking and the manual doesnt say anything about that.

U have to change the battery by using 2100 mh ur broblem will resolved ... Nikon COOLPIX S230 Digital Camera

I have a Nikon D40. I wish my photographs to be numbered consecutively, 0 to whatever the numbering system goes up to (9999?), even when using a new card, without going into different files or whatever. I named a file "Card 1". The photographs come out labelled "100Card1 DSC 0001" etc. Yestreday, for no apparent reason, having reached "DSC 1021", it then started back at zero and was labelled "101Card1 DSC0001". When I go into the Folders menu there is no mention of "100" or "101", just "card

You need to set "file number sequence" to "on" in the setup menu.\015\012However to get to this menu item you need to ensure that "CSM/setup menu" is set to "full", also in the setup menu.\015\012\015\012\015\012\015\012The setup menu is the on ... Nikon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2642 seconds