Having problems with your Sony Digital Cameras ?

My sony dsc t5 doesn't skip to allow to view pics except for the last one taken, u cannot see the others. It also has E91:01 flashing on the screen.

Answers :

Try initializing the camera. Error 91 is a flash error in Sony\015\012cameras. It is probably a dead flash fuse on the motherboard (most\015\012common problem) or a faulty flash board. If you have a multimeter, I\015\012can help you locate and test the fuse and if you have a soldering iron\015\012- even fix it. My e-mail is [email protected] Otherwise, you\015\012should contact your local Sony service center or other local camera\015\012service center.

Hope this helps!

Repair Help & Product Troubleshooting for Sony Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My sony dsc t5 doesn't skip to allow to view pics except for the last one taken, u cannot see the others. It also has E91:01 flashing on the screen.

Hi!Try initializing the camera. Error 91 is a flash error in Sony\015\012cameras. It is probably a dead flash fuse on the motherboard (most\015\012common problem) or a faulty flash board. If you have a multimeter, I\015\012can help you locate a ... Sony Digital Cameras

Blank screen I am facing wird problem. i havent used my nikon coolpix 5700 camera almost for a year. yesterday when I tried to use, I get blank screen. I can see the menus on the screen and navigate through them. I can also seen picture that I had already taken in playback mode. One more observation is, green light (for autofocus) is blinking and does not become stable. Also flash always turns on irrespective of light conditions (But picturea taken are blank). I tried resetting camera. No

Contact nikon they know about it and will fix it free ... Nikon Coolpix 5700 Digital Camera

My digital camera will turn on but the screen shows three big black spots. I cannot see anything. The flash will work as if I am taking a picture. I cannot see the screen to see the picture that was taken.

... Digital Cameras

The screen on my M380 does not show the image. The camera is fully charged and when I press the "on" button, the lens extends and opens. The screen is illuminated, but there is no image of what the picture will be. I can go ahead and take a picture -- it makes the appropriate sounds as it normally would and the flash goes off if needed. In fact, when I then plug into the computer, I can see that a picture was taken. However you cannot focus the shot because you cannot see the image on the s

This can be a settings problem on your camera, so what we can try doing here first is to reset or restore the camera's settings to its default and then after doing that power off the camera and take the battery out for 5 minutes then put it back in a ... Digital Cameras

Canon SD 550-- sensor problem? Bought 3/2006 and have had no problems. Suddenly, LED screen went black--shows nothing and cannot take a picture altho will flash and record black picture. Shooting options do appear on screen when in picture-taking mode. Can see pictures that were taken previously, however, while showing them on TV screen, camera shuts off. Is this an expensive repair. Thanks.

The shutter of the camera is not opening that is why every picture taken is recorded black. It is a mechanical problem and probably has nothing to do with the sensor. Not very expensive ... Canon Digital Cameras

My eos400d is taking photos but the lcd screen is not turning on at all. I cannot preview photos or access the menu. When it first did it the cf card started flashing wen I tried to take a photo. After taking some more photos I got a full cf card message. I deleted photos using my computer as I cant see anything on the screen but the lcd screen still wont come on. I have pressed the disp button also but nothing happens.

Your LCD display card has failed. \015\012This is usually due to mishandling - dropping, bumping, drastic temp change, high humidity etc.\015\012There is no end-user or easy "push this button" fix.\015\012Please contact your local C ... Digital Cameras

I cannot see anything when in camera, film, or view mode. When I snap a photo, it sounds like a picture was taken and the flash still goes off, but nothing is displayed on the screen. Only when I attempted to upload my photos onto my PC was I able to see that my camera was in fact still taking pictures!

Does it show pictures on the computer or is it black images, if they are black, your cameras lens cover could be stuck, it opens up when the lens is fully open, dirt-sand and dust or old grease causes the problem. otherwise your LCD on the camera cou ... Canon PowerShot SD600 Digital Camera

The screen display is just white.Camera can on and off.Photo shots are taken with flash coming but cannot see anything on the screen apart from blank white light...

Mag,This is a tough one. What has happened is that the LCD of the camera has got disconnected from the main board. May be the camera was subjected to thuds or shocks. It is generally connected by aribbon cable which has to be press fitted ... Olympus Stylus 710 Digital Camera

I have nikon coolpix s210. when i turn on the camera, the view finder screen is black, i cannot take pictures as they come out black. though the flash and other functions work well. i can also see photos and video in Play mode. However, i cannot take pictures.

This problem (the screen with no picture) can be caused by a number of problems). One is that a connection with in the camera has disconnected. Another is the possibility of the LCD being bad or broken (some of these LCDs are hard to detect broken sc ... Nikon Coolpix S210 Digital Camera

Within the last few days, suddenly when I take a picture a picture there is a little red eye that is flashing on the left hand of the screen and the little green light at the top is flashing also and there is hesitation of about 15 seconds before a picture is taken and then the picture will have a redish tint to it when it processes. This just started and I have changed batteries out and powered the camera on and off several times and I have checked all of the settings, and still cannot figure

It sounds to me that the timer is on. That would certainly explain the blinking lights and the 15 second delay. There should be a button with what looks like a small clock on it to turn this feature on and off. You should also be able to find it i ... Digital Cameras

When i try to take a picture, i cant see cant image's on the fold out screen or looking into the eye piece, it will flash but the picture also comes up black as if no picther was taken?

This means there is a problem with your lens system. If Lens system seems ok then problem may be with the CCD/CMOS repairing which will be pretty costly and will need a expert hands to fix it. ... Canon PowerShot S2 IS Digital Camera

Hi, I forgot to insert back my memory card to my Panasonic Lumix LX3 one time and instead used its internal memory to take pictures. How can I extract those pictures to my computer? i cannot find its folder. Also, when the memory card is inserted in the camera, there are black screens that appear. But if the memory card is not inserted, the pictures taken using the internal memory can be viewed. HELP!

The image on the internal memory can be accessed only by connecting the camera directly to your computer. Assuming that you are using a Windows-based PC. If you are using Windows XP or a later Operating System, you do not need to install any driver f ... Digital Cameras

Bought this product on 28/03-08 at bangalore.all snaps taken out-doors becomes too whitish and not able to see anything, the lcd screen on review shows no snap..but white over exposed result even at auto-mode. cannot take any snaps outdoors in ordinary day light.indoors with flash result is excellent.pl help. b.a.v.baliga

Make sure your ISO setting is set to Auto. Even in auto mode its possible to set your ISO manually. If the ISO is set to auto and the pictures are still to bright, your sensor may be bad. Also make sure your exposure compensation is set to 0. ... Kodak EasyShare C613 Digital Camera

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.

This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

Can't see pictures on display screen after picture is taken. Also can't see pitures after hooked up to the computer. The model is powershot A85. #8822135874 The viewer screen is blurry and photos have been coming out blurry also. I tried turning it on and off several times, and this seems to have worked- for the time being. It has been working- on and off for the last few weeks. Not sure if this is a permanent solution. This camera is also 4 years old..

You need to upgrade the camera software as the software is corrupted please give it local camera service center and get it fixed....... ... Digital Cameras

DC-3185 Frozen A really odd problem is my son's DC3185 is frozen with a live LCD and the Flash in auto mode except the flash icon "flashes" I see a good LCD image of what I am looking at but can not take a picture. The led light is also red. I have installed new batteries and it didn't help. I inserted a flash card and the screen indicated the Flash icon but the flash keeps flashing on and off and the red led light stays on. When I plug it in to a USB port I get the computer to see it as a e

... Argus DC-3185 Digital Camera

I have had a Nikno D3000 camera about 9 months and a problem has just started. When i turn the camera on i can see the full menu on the viewing screen. As soon I take a shot, the screen goes black. I cannot see any mennus nor can i see the shot i have just taken. I have to turn the camera off and then on again to see the menus or to review my shots. can you help?

Hi, your camera is in waranty, contact Nikon service. ... Nikon D3000 Digital Camera

White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.

\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera

When I switch on the camera all functions work but I cannot see anything but a white screen. Seems as if a shutter is not opening in order to take a picture. If I press the button to take a picture it works but cannot take one as cannot see anything.

... Fuji FinePix A310 Digital Camera

Black screen Hi, I have a Powershot S1iS (CANNON), and it worked just fine for about 2 years now. Last week - suddenly the screen went black, and I can not see anything. When I switch to see the pictures I've taken before, I am able to do that, and I do see them. When I try to take a picture - I'm able to, but the picture is black. Can it be a memory card problem (since it's a new one, and I didn't swap it, to verify that). Thanks - Shlomi [email protected]

Someone else posted that Canon fixed it for free. \015\012\015\012Here's a link to the Canon service site that explains their take on the problem. Yes they will fix it if it is indeed a CCD issue.\015\012\015\012 ... Canon PowerShot S1 IS Digital Camera

I have two olympus 1010 camera's. Both have been dropped. The lens is patially open and the cover not fully closed. One will turn on so you can see through the LCD but only the top third of the field is visible. When photos are taken that is what shows up. Also it tries to focus but can't get it clear. The second powers up with information on the LCD but instead of seeing through the camera you see black. Phots can be taken but they too are black. What is wrong and what can be done to fix them?

I'll cover these separately:\015\012\015\012First camera may be as simple as the cover blocking part of the image, or it could be that part of the sensor is damaged. Sensor is the part inside the camera that light hits and converts to vo ... Digital Cameras

Display problem Canon powershot Sd110 The amera is clicking the photos but we cannot see it on the screen. the screen just showa a horizontal line and doesn't give any picture or anything.It used to click photos very clearly and everything and I can see the previous photos as well which are already saved in it. It is not giving any view while clicking the photos and the screen remains dark in colour with the horizontal slim light going up and dowm.It also gives the sound on clicking the photo b

Contact Canon - dont say where purchased- could save a complication- but yes CCD problem- should be replaced FOC - a hefty discount on a new one ... Canon PowerShot SD110 / IXUS IIs Digital Camera

When i turn on camera i see screen but cannot see images properly its very dark i tried to make changes in brightness but still it is not showing picture i mean when there is light then also i cannot see picture its very black and once camera fell down by me by mistake

Hi!Probably a dead backlight fuse on the main board. If you don't have experience in soldering and repairs, contact your local Sony service center, but\015\012if they ask too much, you can contact me at [email protected]\015\012and I wil ... Sony Cyber-shot DSC-W30 Digital Camera

When I attempt at taking photos with my camera, I notice that most of them don't turn out. Instead all I can see in the screen & the picture is this purple-ish screen. It responds to light, but I can't see any figures (people). It does this with, not only pictures, but videos also. Once in a great while, it will work fine, but lately I've taken 3 pictures without any weird, purple, fuzzy lines on them. I've had my camera for only 6 months, and I may have dropped it a few times, but probably not

I do not know what the problem is. I have the same camera, mine works fine. However, i have the same problem with my cell phone camera. I do not know what happened to it. It was working fine. Now my pictures turn out multi colored. If you happen to f ... Fuji Finepix Z20fd Digital Camera

Suddenly I cannot search for images on my camera face.It seems to be stuck on one early photo. I tried to go to " lock " images -no help. also my computer will notprint pictures taken since July 28 or so. The camera worked fine until this AM. Can you also tell me how to delete a pic I don't want recently taken? ( if the other problem gets fixed )thank you so much Mickey Savage in Oregon I am so hoping I have not lost those latest pictures !

You need to remove the battery from the camera for 5 minutes, if that doesn't reset the programming then the camera has failed and you will need to send it in to an repair center, check your user manual for locations. as far as the images go if you c ... Polaroid i733LP Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3445 seconds