Having problems with your Sony Digital Cameras ?

I have a Spny HDR-SR8E Video Camera. Can these images be edited using IMovie 6.03?


Answers :

Hi,

This really depends on what file format your camera uses when saving video. When connected to your printer, it should show as a removable hard drive. Double click the folder to display the contents and then rick click a file and choose properties. This will tell you the file type.

If this is not mpeg or avi you will have a problem Most proprietory file formats are actually mpeg files so copy one to a temp folder and rename the file to change the file extension to .mpg. Now, open your movie editor and open this file you just change the file extension to mpg. If it opens with no problem your fine now.

If this does not work Sony should have supplied you with software that although limited should allow you to pen and then export the files as mpg, you can open them in your movie editor.

Regards,
Worldvet
Should be yes. if you can't import directly and get iMovie to convert properly or\015\012import the files to your hard drive and "image" them so that iMovie \015\012will recognize them for "Import from Camera" and properly convert them,\015\012then I would convert manually using Voltaic for AVCHD and MPEG\015\012Streamclip (with QT MPEG-2 PLayback component) for MPEG-2 SD content in\015\012DV or AIC/AIFF editing or iSquint for MPEG4/AAC or H.264/AAC editing in\015\012iMovie.
Hope that helps.
Thanks,
Lee
Repair Help & Product Troubleshooting for Sony Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Spny HDR-SR8E Video Camera. Can these images be edited using IMovie 6.03?


Hi,This really depends on what file format your camera uses when saving video. When connected to your printer, it should show as a removable hard drive. Double click the folder to display the contents and then rick click a file and choose ... Sony Digital Cameras

I have a new Panasonic DMC-FZ38 digital camera and I seem to have a problem capturing video footage to a PC. I can record video on the camera and it plays back on the camera quite satisfactorily. However when using the supplied software (Photofun studio 4 HD Edition) to transfer images to the PC it fails to recognise that there are any video images. Only the still pictures are transferred. I have tried using other software also and that also says there are no video images. I cannot find anyt


I recommend downloading quicktime player. This player is made for playing pics and videos from these cameras. ... Digital Cameras

Efects Hello! I have a problem. I can't use the FUN MODE when I take a picture. The COLOR and IMAGE ADJUST can be used, but the FUN MODE not. It shows OFF--but OFF isn't highlighted. I can only use the effects when editing. Pls tell me what to do. Thank you very much! Bye!


Its an editing feature accesible using the E button for Effect, then use the fun button. you cant shoot in fun mode. p59 of the manual. ... Samsung Digimax S630 Digital Camera

I TOOK SOME PICTURES WITH MY NIKON COOLPIX S3000 & I EDITED THEM ON MY COMPUTER USING PAINTSHOP PRO. I PUT THEM BACK ON MY CAMERA BUT NOW I CANT VIEW ANY OF THEM I GET AN ERROR MESSAGE THAT SAYS "FILE HAS NO IMAGE DATA " THEY ARE ALL IN JPEG FORMAT I ALSO DOWNLOADED A TRIAL VERSION OF "TVWRITER" BUT I HATE THAT IT AUTOMATICALLY ADDS A TVWRITER DEMO STAMP ON ALL OF MY PICTURES. IS THERE ANYWAY I CAN VIEW THESE IMAGES ON MY CAMERA AGAIN? PLEASE HELP ME ...


Most cameras will not display images that were not taken on that camera (or at least a camera of the same brand). In addition, they will not display edited photographs. If you want to display edited photographs, you'll need to do it on the computer o ... Digital Cameras

How do I calibrate my monitor? I have a new epson 3100z and a Epson photo Printer890... PIM is a joke..... I use adobe for image editing and image expert to print... My photos look great on the monitor but when I print, the dark blue comes out purple... and the skin tone looks washed out, no color


In order to get out to the printer what your camera captured three things must be calibrated (profiled). First of all your camera must be profiled to descibe to the other elements what is the color space., Next the monitor must be profiled, and all o ... Epson PhotoPC 3100Z Digital Camera

The user manual for my Vivicam 5024 says I must install PhoTags Express from a disk. I have no disk and have not installed the program, but I can download photos from my camera to Vivitar Experience Image Manager. In addition I can use its Edit feature on photos downloaded from the WEB, but not on photos from my camera. Do I need PhoTags Express and why?


No, you don't need PhoTags. If you're using a memory card, get a card reader. You can use it to download to a folder you create on your desktop. From there, you can do anything you want in the program of your choice. ... Vivitar ViviCam 5024 Digital Camera

I'm trying to shoot HDR photos using my XSi/450D. From the menu two I've set the AEB EV step range as 0, -2 and 2. From here, though, I don't know what to do. If I go directly from the menu to shooting, I don't get any automatic shots, but rather single, individual shots based on the current exposure settings. Help. I've scanned my 45D manual, DVD tutorial, etc. and cannot find my missing step to create a series of AEB shots. Many Thanks, Robert


... Canon Digital Cameras

After editing images, I've moved images back to


... Digital Cameras

Distorted images When I try to capture a "superfine" resolution image (1600x1200), the image is distorted - segmented, linear blocks across the image, steps in the image, colour is separated into colour blocks - if only I could send you an attachment to demonstrate the effect - it would be so much easier!  I try to use this camera at work to document problems with equipment. This was my first digital camera - and what a disappointment! The batteries drain almost immediately, and never try to use


There has to be something wrong with the firmware in the camera in order for that to happen. You could take it into a camera store but I have a feeling the cost is going to be too high.\015\012\015\012I couldn't download the manual from ... Vivitar Vivicam 3345 Digital Camera

Downloading images When i connected my 900ti to my PC i used to get a list of options on my camera, one of which was download new images. When i connect now, I don't get anything on my camera screen. I want to download my images in folders by date, but using the wizard the only way I can do it is to download all images into one huge file. How can I get my images onto my PC with the date attached to each one? Thanks a lot Caroline


I don't have this model of Camera, but I think you should be using the same Canon software. Try going to your PC, go to Programs and going to the Canon Utilities folder. You will see a CAMERA WINDOW folder that has another CAMERA WINDOW folder that ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

I have a Canon S30 digital camera and a Macbook running OS x 10.5.8. I use a San Disk USB card reader to download the images to my computer and when I do, the images look normal when they are at thumbnail size, but when I open them they are distorted, cut up into horizontal columns, discolored, and rearranged vertically. This happens whether I use iPhoto, Image Capture, or go directly from the device onto my desktop. I have not downloaded any Canon software or drivers onto my computer, that may


One thing to remember is that most digital cameras capture an image and a thumb nail, the thumb nail in many cases is a separate file. So the problem can be the camera itself.\015\012 The other issue is the image editing software you are using and ho ... Digital Cameras

Soft Images Is it normal for images taken with a canon EOS 20D to appear soft. this is my first time using a digital 35mm camera and i am not impressed with the image quality of the camera and the L lens i used. is there a specific workflow that i should follow? thanks


Have you done the basic unsharp masking after RAW processing? Normally you'll find a 500% strength, 0.3 pixel and a threshold of 1 or 2 brings out the detail masked by the AA filter very well. DOn't bother with the sharpening in PS ACR....it's too cr ... Canon EOS-20D Digital Camera with 17-85mm Lens

I want to replace the memory chip in my Canon PowerShot SD1100 IS camera with a larger one but leave the photos taken on the original memory card on the camera. I used my computer to first read the photos off the original chip, then to write them back to the larger chip. When I put the larger chip in the camera, it shows no images. When I read the chip with a card reader, I do see the images. I want to be able to see those images on the camera (so I can use it as a viewer to share my photos


Hello.First of all make sure you have a copy of all your pictures in your computer. Then format the new card USING YOUR DIGITAL CAMERA. After that, transfer the pictures to your SD card from your computer and make sure that you did ... Digital Cameras

JUST USED MY CANON 950IS FOR THE FIRST TIME USING A SANDISK ULTRA II SDHC 4GB CARD. DOWNLOADED FIRST PICTURES ONTO LAPTOP USING THE MICROMATE WHICH CAME WITH MEMORY CARD. WHEN I'VE PUT THE CARD BACK IN THE CAMERA, A MESSAGE COMES UP ON SOME OF THE IMAGES 'INCOMPATIBLE JPEG'! THE IMAGES ARE STILL THERE ON THE CARD BUT THE CAMERA DOES NOT SEEM TO WANT TO READ AOME OF THEM. IS THIS A CARD OR CAMERA PROBLE ??


Sounds like a card problem. Did you format the card in the camera when you first got it? If not, recommend formatting it using the camera. Look for the format option in the camera's menus. Note that this will also erase all images from the card, ... Canon Digital Cameras

Hi, I got a new ProSpec 4gb flash card and used it last night in my canon 40d. I forgot to format before I initially used it. Shot lots of great images that I could see on the camera back, but now I am getting the messages - can not create a folder, tried to shoot another image and is says cf card is full, and now I can't review on camera, it says there are no images. Tried Digital Photo recovery software and got nothing. Anything at all I can do? I'm tempted to format now and then see if I can


I do not have a solution, but I do have same problem, or a variation of it: filled my ProSpec 2GB, removed it from my Canon G10 to insert a fresh card, then later reinserted the ProSpec to transfer photos to computer. Several tries, and no go. First ... Canon Digital Cameras

My HP M527 digital camera works well with my Macintosh iBook G4 using Image Capture. However, it does not work with my iMac desktop even though I am using the identical software. With my iMac, I get all indications that the camera is connected but all I get is a continuing mwessage "..waiting for the device." I have tried disconnecting my all in one printer, but get the same results. I'm using Mac OS X v 10.4.11 and Image Capture versio 3.3.3 on both computers. Any suggestions? Than


Locate and copy the driver into the desktop...or locate it somewhere on the net ...it is not enough to use the software that makes the camera available for commands and all ...but it needs the actual driver for to communicate ...it is searching in l ... HP Photosmart M527 Digital Camera

I have the first digital rebel and as of lately my images are not as crisp as they used to be. Im having this issue even when I use a tripod...I also use auto focus and the images are not as crisp/clear...do u have any suggestions to help correct this


When you take the lens off .. there is a mirror and the CCD array ... those can get dusty or if anyone smokes around the camera then that gets on these parts .. you can dust the mirror and CCD behind with a soft clean camel hair brush but a good clea ... Canon Rebel XT / EOS 350D Digital Camera

I need an image editing software


Go here. But they will cost you.http://www.adobe.com/downloads/Or go here. Free stuff. ... Sakar (86480) Digital Camera

Can I transfer photos back to the card after editing the images?


Nikon complies with the industry standard DCF (Design Rule for Camera File Systems) format which governs the file structure of images on memory cards as well as file naming and other image properties. Due to the constraints of this file system, image ... Nikon Coolpix 5700 Digital Camera

Can I transfer photos back to the card after editing the images?


I can't believe that this is not simple and possible through Nikon Transfer. People have to be able to transfer edited images in order to print them. I would say that this is the best reason I have heard so far to trash my nikon software and not use ... Nikon Coolpix 2000 Digital Camera

Flash Card says Full but 0 images.


Yes, try formatting the card within the camera and then check. ... Canon PowerShot A630 Digital Camera

I have the camera connected by usb cable but the zoombrowser software says it can't find the camera. The images come up using Adobe but save them as tiff files. When I try and save the images using the viewer to change file type it says the path is too long no matter how long the path is.


... Canon Digital Cameras

Hi, We bought a Sony DCR HC62 Handycam last month. Twice now while recording a video, horizontal gray bars appear on the display screen breaking the image up. Like looking at the image through venetian blinds. They stay on the screen for a few seconds and then disappear. We bought a head cleaner and ran it through last night and are continuing to use the camera to see if it occurs again. We are using 60 minute Maxell tapes. We have tried Sony tech support which is an absolute joke (they sho


... Digital Cameras

When using the viewfinder the image is blurry, however, the image is crisp when using the LCD monitor.


If the image is clear on the LCD and you can take sharp pictures, then your main optics and electronics are good. Your camera has an adjustable viewfinder. Check the manual to see how to adjust for your vision. ... Canon PowerShot SX1 IS Digital Camera

Hi, i have got a canon a300 and when i use the function button to change the exposure or awb in camera mode it keeps going from image quality and image size only, but when i use it in video mode it works fine. Can anyone help me please. Many tnanks Steve


In addition to camera mode, you may have your camera in one of the scene modes. Some of them limit the changes you can make. ... Canon PowerShot A300 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1450 seconds