Having problems with your Sony Mavica MVC-CD300 Digital Camera ?
The lens will not focus and i cannot use the zoom feature.
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The lens will not focus and i cannot use the zoom feature.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Sony Mavica MVC-CD300 Digital Camera
My Sony W120 Cyber-shot will not focus properly when I zoom in all the way. Even when I unzoom back, it still cannot focus properly. I have to turn it off and on again, and not use the zoom feature.
Please check the setting on the dial you are using? Return it to AUTO first and try to zoom again. ... Sony Cyber-shot Digital Camera
Hi, I have a Samsung PL100. When I turn it on the lens extends and then buzzes for about two seconds, the camera will then not focus (though it will zoom in and out). I have to admit that I have had the zoom unit apart to look for anything obvious, so it may need replacing. Is there any procedure I can use to seat the lenses in the correct position before switching on or can you advise on anywhere that sells these zoom units, as I cannot find any suppliers? Many thanks Steve O.
Unfortunately you have probably already turned your camera to scrap. Optical repairs of that type need specialist equipment, and in practice the tolerances are so fine that the only fix is to replace the entire optical assembly.In your ca ... Digital Cameras
I was using my Nikon D40 at son's baseball game with the 55-200 mm lens & was too close to the fence when zooming since it tapped the fence. Now it makes a squeaky noise when trying to auto focus. It will not take a pic on auto focus but will focus and if I flip the A / M switch on the lens itself over to M it will take a pic.It will take pics fine with the 18 - 55 mm lens. It's nota problem with the Zoom, but with the autofocus. When it attempts to autofocus, it goes thru the extremes of the le
This will need to be fixed , this is common with nikon on there auto focus sensingm you might want to check it into a camera shop and have it repaired or adjusted, other then that I have nothing further at this time to tell you. ... Nikon D40x Digital Camera
Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!
THIS SOUNDS TERMINAL, BUT YOU MIGHT TRY USING CANNED AIR LIKE YOU USE TO BLOW DUST OUT OF YOUR COMPUTER, AND SEE IF IT HELPS ANY. MOST OF THESE CAMERAS ARE MADE WITH THE IDEA THAT THEY WILL NEVER BE TAKEN APART OR OPENED FOR CLEANING ETC. SO, THAT IS ... Digital Cameras
Zoom feature lately...when i use the zoom feature...it's doesn't stay focused. it keeps moving in and out of focus when i'm trying to take a picture.
Could be the battery is old and not charging well. Happened to mine & once I got the new battery everything was fine again! ... Kodak EasyShare DX6490 Digital Camera
I am shooting with a 10mm - 22mm lens - however that should not matter. Frequently my camera cannot find a focal point and therefore i cannot active the shutter release. I am forced to switch to either Manual focus or A (Automatic. I generally have the camera set to either AV or P for standard shooting. I have an EOS Reblel (6.4 pxls) that i've used with the same (10 -22) lens and i have never run into this focusing issue. Also, I am framing pretty standard subjects like doorways etc....N
Hi Janet.If the problem is with auto focus, then it is a factory defect due to the smaller flap. Here an article I wrote regarding this problem: the a ... Digital Cameras
Lens conversion I often use a telephoto lens or another type of lens such as a panoramic. I cannot get my camera to switch back to normal lens usage. I do have the Conversion Lens: OFF in the menu option. In the screen though my camera still shows W========T there is no other. Any suggestions? Usaually there is a line between the W and the T to show zoom conversion. I cannot get that back.
Check the smart zoom precision zoom setting ... Sony Cyber-shot DSC-H2 Digital Camera
I cannot use zoom in or zoom out feature. I is
Your camera has some problem with its lens assembly. I suggest you take it to a service center as it could be disastrous to try to do it yourself. ... Samsung Digimax S630 Digital Camera
After using my new k30 for a few hours with an old m lens, the camera won't go into manual and the green button stopdown feature doesn't work. also camera won't go into manual with a new pentax lens (12-24mm zoom). pentax fixed it once but now same problem has happened after about half hour of use with m lens.
... Pentax Digital Cameras
Telephoto lens I have added a telephoto lens to my pro 1. I have 2 lens adaptor tubes and a merkury 2x 58 mm lens. When I try to photograph at any distance the object is blurry, out of focus.I have tried only using optical zoom and it still won't focus properly.Every other aspect of the camera is great.Macro works great with the merkury wide angle macro lens & adaptor, it's just the tele lens. HELP, I can't get as close to the deer as I would like without the tele lens.
Hi, the adoptor tube are not compatible to the camera try to consult nearest lense seller they can recommend the exact adoptor lenses to your camera. ... Canon PowerShot Pro1 Digital Camera
Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c
It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera
All of a sudden every picture I take with the 55-200 zoom lens is blurry and slightly out of focus. Pictures with the 18-55 lens are still sharp. I have been using that 55-200 lens for years for sports shots, and have never had any problem. I get the same blurriness shooting in both the auto sports setting and in shutter priority. It is a brand new issue. Could it be the AF servos starting to go in the lens, or am I doing something stupid?
Simplest answer is that you may have accidentally flipped the focus switch (A/M) on the lens to M. This turns off autofocus for that lens (which you might need to do if autofocus just can't resolve the image). Try turning it back to A.Ano ... Nikon D40x Digital Camera
My Canon digital rebel will not autofocus correctly. My camera has 7 points autofocus, but it will only autofocus on the far right point. All other points are not used. I have had the camera for 14 months and the problem just began. If I want to focus on anything in the left to center of the field of vision, I cannot do it. However, the lens focuses manually very well. Why won't my camera focus on other points than the far right one?
I had this problem awhile ago - you must have accidently adjusted the focal area - it is sooooo easy to do without realising it. Here is what I was told:**************************Most likely, you have changed the AF point, which onl ... Canon Rebel XT / EOS 350D Digital Camera
Fuji finepix f650 zoom lens will only open halfway and when turned on "zoom error" appears. camera cannot take photos. Fuji finepix F650 zoom error when switched on - camera hardly used virtually new!
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Fuji FinePix F650 Digital Camera
I have a Canon xsi slr (digital) and a Canon xti slr (film). I cannot seem to get a good quality photo when I use the Canon zoom lens that I used on the film camera when I use it on the digital.
What are the lens specifications ? Try raising this query with the canon customer service. ... Canon EOS Rebel XSi Digital Camera
I BOUGHT A PENTAX K10D THAT CAME WITH A VERY NICE AUTO ZOOM LENS. I OWN SEVERAL OLDER PENTAX LENSES THAT I USED ON MY K1000 CAMERA AND I WANT TO USE THEM ON THE K10D. I CANNOT FIGURE OUT THE SETTINGS THAT NEED TO BE CHANGED ON THE CAMERA TO MAKE THEM WORK. I SPENT SEVERAL HOURS IN THE BOOK TRYING TO FIGURE IT OUT AND AM MORE CONFUSED NOW THAN WHEN I STARTED. THANKS ROY
1. Set manual focus2. In Menu -> custom settings ->Using aperture ring = 23. When taking photo, focus, set aperture and press green button to set exposure time. Then press shutter. works fine with my antique SMC Pentax lenses. ... Pentax K100D Super Digital SLR Camera
Hi..... Years ago I purchased a Vivitar Series 1 70-210 zoom lens with macro to fit my Konica SLRs. I also aquired a similar lense to fit my Minolta 101b. I have recently bought a Sony A100 digital SLR and would like to know if there are any converter rings available to use my old lenses on the new camera. I just love the one-stop zoom and focus operation. Any help appreciated Grayham
Will help u as soon as possible ... Vivitar Digital Cameras
Hi. I use my Nikon D2x and 80-200 f2.8 zoom extensively, generally with a Hama cable release. Recently, the set-up stopped working. The camera focuses, but the release will not trip the shutter. The only clue (with a freshly formatted 16Gb CF card in use) is r17 in the viewfinder, although the manual fails to mention what this means. The cable release works perfectly on my D700 with the same lens. Anyone any ideas? Paul Perton Cape Town
This problem seems to your camera Auto-Focus, first I suggest reset all the focus settigns in your camera.If the "r17" message come on again, and, if you try anything more then that can damage your camera so you can contact your nearest s ... Nikon D2X Digital Camera
My Panasonic DMC-FH1 stopped working after less than a month of use. It has been treated with care, not dropped or thrown about. It powers up, the lens automatically extends, but it cannot focus. After about 10 seconds the display reads: SYSTEM ERROR (FOCUS). I have tried recharging the battery, and leaving the camera powered down for an extended period. The owner's manual does not reference this problem. Any thoughts? Thanks you, Brian
\342\200\242 The focus range varies depending on the Recording Mode. > Set to the proper mode for the distance to the subject.\342\200\242 The subject is beyond the focus range of the camera.\342\200\242 There is camera shake (jitter) or ... Digital Cameras
I have the Canon EOS - older model - and when using with my Canon Zoom Lens 70-300 mm it does not work on auto focus but will with manual focus.
Clean the contacts on the camera body and lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon Rebel XT / EOS 350D Digital Camera
Camera stalling The problems started after using my camera on a windy day at the beach 3weeks ago. After a few days, the lens started getting stuck, and wouldn't come out, or if it did, didn't focus properly. This problem was intermittent. Then, in the past several days, the camera systems stall when I switch it on. The lens comes out and zooms fully. but It will not respond to any of the control buttons. Which part of the camera is the problem? is it fixable? How much is the estimated cost of r
This problem is related to your lens , because even if the lens extend fully and for the past things that happened on the camera there's a big chance that some dirt get in to the camera that causes the problem. What you can try first is to take the b ... Panasonic Lumix DMC-FX7 Digital Camera
I use a Quantaray lens af ld 70-300mm 1:4-5.6 tele-macro(1:2)@62 with my Canon eos Digtal Rebel xti. I have used the camera and the lens together very well for about a year and a half. Just recently with this lens set aat normal and the camera set at af(auto focus)the lens trys to focus and will continue to search for the correct focus setting with out taking the picture. Also the lens appears to be darker when I look through the viewer. I have a Canon EFS18-55mm lens which is operating correctl
... Digital Cameras
I have a Canon 20D camera that I use with two lenses. The lens that I have most of my problems with is the 28-70 f2.8 red ring lens. When focusing It always seems to focus on what is behind the subject. No matter how much I concentrate on the focusing sensor to focus on the subject -AND it looks like it focuses on the subject-UNITL I load my photos and look at them in disgust that it focused behind it!! What is going on?? I use the same lens on my friend's cannon 5D and NEVER have this problem.
This is quite a well known problem called 'back focusing' there is little that can really be done about it, except if the camera is under warrnty you can send it in and they will do some laser alignment that fixes the problem, it would be worth a cal ... Canon Digital Cameras
I have a canon EF 70-300 f/4.5-5.6 DO IS USM lens that has a zoom lock switch. When in the unlocked position and I try to zoom the lens it sticks at around the 200mm mark and cannot seem to move it below that positon, I need to wiggle the barrel before the zoom seems to "let go" and the lens goes to other positions. This is quite a problem as the lens cannot be operated in all its positions. Also when trying to get it unstuck, it feels like I am applying too much force and could further damage
Http://www.pasieka.com/static/simon/fixcam/\015\012\015\012click the link ... Digital Cameras