Having problems with your SVP CDC-7530 Digital Camera ?

I have a SVP CDC-7530 digital camera which I feel has reached the end of its life given that as it turns on, but no one is home. I turn it on, but whether you have it connected to a PC, or on any of the camera/viewing/recording setting nothing shows on the LCD & it won't turn off until you open the battery cover.


Answers :

Repair Help & Product Troubleshooting for SVP CDC-7530 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a SVP CDC-7530 digital camera which I feel has reached the end of its life given that as it turns on, but no one is home. I turn it on, but whether you have it connected to a PC, or on any of the camera/viewing/recording setting nothing shows on the LCD & it won't turn off until you open the battery cover.


... SVP CDC-7530 Digital Camera

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

Started having a problem turning on. When i first bought the camera you turned it on and it was instantly ready to take a photo and instantly showed what you were looking at on the lcd. Since i connected to a computer and transfered photos when i turn it on it the lcd stays black for about 20 seconds before it shows what the camera is pointing at and allows you take a photos, Any ideas how I can rectify this? thanks


Sounds like you didn't use the"safely remove hardware" function when you disconnected the camera from the computer and caused a slight problem in the camera. If your pics are safely on the computer, go into the camera menu and find "reset" and follow ... Kodak EasyShare M530 Digital Camera

When turning off my D90 I have on the control panel showing ISO 1.0 in parenthesis and the letter K to the upper right of the 1.0 this remains on when the camera is turned off. I have tried everything that has to do with this setting and cannot get it to go away when turned off. Pulling the battery is the only option so far even going back to default settings has no effect....help


I'm assuming it's actually on the lower right corner. It's supposed to stay on, even with the camera turned off. All it's doing is telling you that the memory card still has room for a thousand more pictures.The power drain is so minimal ... Nikon DSLR D90 Digital Camera

I have connected the camera to my USB port and turned on the camera with the dial turned to PC setting, but my computer wont recognise the connection!! Help?


Try to plug it to another USB port on the computer and then turn the camera on and set it to play mode. Also, try to restart the computer and then try plugging it again. ... Digital Cameras

Hello, MY Camera (s2950 just out of no where wont show pictutre. i turn it on and its a blank screen... I dont know what to do, they told me to send it in, but i cant afford shipping and if its easy enough to where i can do it, then I will......I just really need help. It turns on and i can take pictures, but it wont connect to my computer or show anything on the screens..can ANYBODY help me please?!


Check if there is anything displayed on the EVF (electronic view finder) instead of on the LCD (screen). If you see an image there, hit the EVF/LCD button to switch to the LCD screen view. ... FUJIFILM FinePix S2950 / S2990 Digital Camera

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu


OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

Screen my camera turns on fine, but nothing shows on the screen. i fully charged the battery and it still doesn't show anything on the screen. you can take a picture, but the screen is still blank. when i tried to connect my camera to my computer it said connection fail!...does anyone know how to fix this?? or what's wrong at least?


The screen can be switched off to save power! Make sure screen is set to on position ... Sanyo VPC-E760 Digital Camera

How do I set the start image? I've tried following the menu commands, but when I select "Start Image," my options are the logo, "off," and then a black box with a question mark. I've selected it, and it shows the option set for "user image," but no start image shows up when I turn the camera on.


After going through the menu and choosing user image, view the picture you would like to set as your start image. Press the button with the E on it that is underneath the zoom button. The screen should then show four images across the top, say the wo ... Samsung L200 Digital Camera

First let me say that I know nothing about the camcorded (600x digital zoom). It was my sons and he bought a new one and gave me his. I charged the batteries and put them in and I put the proper vhs cassett in. When I turn it on and set it on A, the lcd monitor says Demostration mode and it shows all the effects and features over and over. I set Recording start/stop on A and pressed the red button but nothing happens. It just continues showing featues. Can you help me.


I took the battries and cartridge out and started all over. The cart. was stuck. That must have been the problem because when I put everything back, it worked. That you for responing. Arlene Gerrity ... JVC Digital Cameras

My camera is less than a year old but has recently been giving problems with the battery connection - I believe. The battery shows full and the camera works perfectly, then with no indication why the camera will not turn on. When left and then turned on later it sometimes works again, without the battery being charged in the meantime and with it again showing full. As I am going on holiday in 2 weeks I have not time to send it back to cannon under guarantee. Can you suggest anything I can check?


Check if your memory slot cover is properly closed... this doesn't turn on the camera....I had tough times, later found the cause... ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

My goPro hero HD is stuck at "tel" mode, after i hooked it up to a TV. I have tried some forum-solutions with no luck what so ever! When I turn it on it shows the normal "film" menu, but after 3 sec. it turns back to "tel". When it is in "tel" mode, I can't turn it off, the camera simply behaves as it is connected to the TV. To turn it off I have to plug it in to the USB and back out, or disconnect the battery. Thank you for your assistance. - Will this problem continue, or is it just a


... GoPro Digital Hero 3 Digital Camera

Negative effect. I've had my Canon Powershot S3 1S for over a year now. The other day I was taking pictures and it was working fine. I turn it off and set it down. I come back later, turn it on again and the screen shows has white lines that keep flicking over it. I turn it off and take the batteries out. Later I put the batteries back in, turn it on, and find that it is in negative effect. I'm pretty sure that my camera can't do this naturally and I've tried everything to see if I could get it


Have you tried resetting it to factory settings. if no please do it.(refer manual)but if yes please contact us again ... Canon PowerShot S3 IS Digital Camera

I CAN'T GET THE DATE TO TURN ON. IT WILL LET ME RESET IT, BUT IT WON'T LET ME TURN IT ON. When I go into the menu setting, it shows that the date is turned off and I can not access another menu that will allow me to turn it on. I need to date stamp pictures for work. Thanks for your help.


The date/time stamp only works in "Postcard" resolution. Press the "Func Set" button, then scroll down to the bottom to select postcard resolution. \015\012\015\012Then press the menu button. Select the "Camera" menu, then scroll down to the th ... Canon PowerShot SX100 IS Digital Camera

Lumix DMC-ZR1 When I turn the camera on, I get a message telling me to turn it off and turn it on again. It does not focus, and the EZ zoom shows all the time whether I press the button or not. I also get a "system error ( focus) " message.


This is a lens mechanism fault. USe can of air and spray on surrounding the lens For cleaning the dust. and then try. ... Panasonic Lumix DMC-FZ28 Digital Camera

Casio ex-z700 The lens will not open up when I turn on the camera. After a while a message shows on the cammera that says check connections. It was working ok before. I turned it off, put it away and a few days later turned it on to view pictures and this happened.


Your lens has sustained damage and needs to be sent in to repairs. ... Casio Exilim Zoom EX-Z700 Digital Camera

When I turn on the camera the LCD screen no longer shows the settings. I can still take pictures and it shows the image on the LCD screen, and if I hit menu screen shows. Did I push something I wasn't supposed to?


That is just a setting. It turns off the lcd to save battery or when you want to just use the optics for sightiing/focus etc. Should be one of the menus that show up when you hit the menu button. You should be able to set it off as it is now or have ... Sony Alpha DSLR-A100 Digital Camera

LCD Black I went to turn on my camera and everything turned on normally( shutter opened). When we lookied at the LCD screen it is black but the icons show up. We can change setting. If you take a picture the way it is now the picture turns out black. I cannot see any images in the LCD at all. All pictures taken now are black.


Swith off the Camera and gently tap the bottom(tripod hole side) to a hard surface, I was lucky and it worked for me for the same kind of problem. ... Konica Minolta DiMAGE E500 Digital Camera

When connecting my camera, it won't change into connection mode even though my computer is acknowledging that it is plugged in. The USB port beeps at me when turning on and off the camera, but no file exists showing connection to it.


Are you making sure that when you plug it in you use the playback button instead of the regular power button to turn the camera on? If you turn the camera on with the regular power button I don't think it will switch to the connection mode. Try plugg ... Canon PowerShot SX10 IS Digital Camera

Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as


... Moultrie GameSpy 4.0 Digital Camera Deluxe

Blurry images I purchased about a year ago a new Panasonic DMC-TZ4. And up until this point, I was in love with this camera. However, just recently, sometimes when I turn the camera on, the screen is showing images to be out of focus and blurry. All the settings are correct. Some times it stays like this for hours. Other times, I can turn the camera off and then back on and the blurriness goes away. Twice the camera has frozen and I had to take the battery out. And some times when I turn the cam


Sounds like a lens problem. If you've ever let the camera "auto turn-off" as a power-saving measure, any button pushed will turn it back on...even if it's in a case or your pocket. This puts strain on the lens as it tries to come out...result....lens ... Panasonic DMC-TZ4 Digital Camera

I have a Nikon Coolpix S2 - it's a few yearsold. When I turn it on, the monitor is showing snow (like an old-fashioned TV set). The mechanism to take photos works but they are blank (blacK).


... Nikon CoolPix S2 Digital Camera

Turn on camera and set date and time shows up


Take your camera apart and put a piece of electrical tape over the center button (ok) on the menu.Worked just fine for me after that. ... Kodak EasyShare CX7330 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2897 seconds