Having problems with your Vivitar V8025 Digital Camera ?

Can not playback to view pictures, home button will push in ,but nothing happens ,menu button works just fine ,camera has not been dropped and is 7months new vivitar 8025

Answers :


Please try below link

Vivitar Camera
Repair Help & Product Troubleshooting for Vivitar V8025 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can not playback to view pictures, home button will push in ,but nothing happens ,menu button works just fine ,camera has not been dropped and is 7months new vivitar 8025

Hi,Please try below linkVivitar Camera ... Vivitar V8025 Digital Camera

My Pentax Optio A20 camera display doesn't show true colors, they now have a red-orange tint. It was dropped on the grass yesterday. When I play back the pictures, all of them show up as red-orange on the display, the ones I took before it was dropped and after it was dropped. Everything else works fine on the camera. My brother-in-law says that there may be a reset button to restore factory settings.

It sounds like you may have a broken display. It is possible that it is the main board, but much more likely that it is the LCD display. I can fix this for $40, not matter if it is the display, or the main board. Or you can send it to Pentax in A ... Pentax Optio A20 Digital Camera

Aloha, My Lumix DMC-TZ3 is having issues. When I turn it on it is extremely dark. It's almost as if the camera is only registering one side of the color spectrum. Even the pictures that are taken come out dark, so I'm guessing it's a lens problem. Not sure how it happened, because the camera was not dropped or treated badly anytime recently. The day before it started going wonky, the pictures and camera were fine. Could this be a lens issue or something internal. Is there a reset button to resto

Unless the protector blades on the front of the lens aren't opening fully, this doesn't sound like a lens problem. It sounds more like a sensor problem. Reset is accomplished by going into the menu and finding "reset"...follow the on-screen instructi ... Panasonic Lumix DMC-LZ2 Digital Camera

Camera I have an olympus camera. I dropped it at a party a few months ago, and the screen cracked on the inside, but it didn't affect the pictures, they came out fine. When I was on vacation, my camera started acting wierd. When I turn it on, the lense goes in and out, and i have to press the playback button so it will stay on. And then, when I try to take a picture it turns out completely blurry. I do not know if Best Buy will take it back because i don't have the insurance plan.. Also I cannot

Hey Giaaxxmarie,\015\012 The problem with the lens going in an out, and the blurry images is most likely caused by damage to the lens that happened when you dropped the camera, and after time the damage got progressi ... Olympus FE-230 Digital Camera

Hello, I purchased a finepix s5700 about 18 months ago. It has worked perfectly until the last few weeks. I can turn the camera on if I hold the playback button and switch on the power, and can scroll through everything in the memory, but when I press the shutter to take a photo, the camera switches itself off. If I press the power by itself the green light comes on for a millisecond, then switches off. It has not been wet, dropped or otherwise. I had it on the shelf one day working fine, the ne

Your\015\012problem\015\012may be due to weak/worn out batteries or corrosion on the battery\015\012contacts inside the camera which can\015\012prevent the full power o ... Fuji FinePix S5700 Digital Camera

I dropped it and now it keeps telling me to turn it off and on again. this occurred once before and the sales rep at circuit city took it and pressed what he called a reset button somewhere on the camera and it was fine. i can locate no such button or information about it.

Go into the menu and find "reset"...follow the on-screen instructions. ... Panasonic Lumix DMC-LZ2 Digital Camera

I dropped my Kodak easyshare C613 and now it wont close. When I push the on/off button it tells me: Lens error: 123,0,0,-18. How can I fix my camera as soon as possible ?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak EasyShare C703 Digital Camera

I dropped the camera once and now some of the buttons wont work the display and menu and left button are fine but the other wont work

When a digital camera falls it usually is not a good sign because parts get broken inside the camera, but it does sound like the system board is working because you have menu and display. However! the problem appears to be more lens related, the circ ... Digital Cameras

Hi the shutter on my 725sw olympus does not shut and therefore the camera won't turn on. Its 18 months old and has been fine until now. It hasn't been dropped or done anything unusual. I can still see all the old photos with the review button Thanks Shane

Appears to be a repair issue... reset will not help in this case but if you want to try... press menu, reset ... Olympus Digital Cameras

I hit the on/off button on my Canon IXY Digital 10 (7.1 m-pixel), and it will not turn on - I get black screen and message:'Lens error, restart camera'. It was working fine before, but has now not worked for over a month. It was not dropped or otherwise obviously damaged. Please help! Tim, Reading

Take out the battery and see if its damaged. if it seems fine put it back in. ... Canon IXY 1000 Digital Camera

Did not drop or hit the camera, but on the P position cannot get a clear focus as it is mostly white. Depressing the Expose button half was shows clear for a moment before getting ready to Shoot. On the Automatic position it is fine

Since the camera focuses in the auto position, we can eliminate the focusing ring assembly as being bad. That leaves the most likely suspect to be the circuit concerned with the P function, which will most likely relate to being a slightly loose ri ... Nikon D80 Digital Camera with 18-135mm Lens

Oops . . . I dropped my camera and all seemed fine until I tried to depress the button that snaps the picture and it seems slightly damaged and will not depress. =( Is this fixable????

It depends on the camera. Repairing a shutter release button on most point and shoot cameras is a simple repair. Some cameras though can be costly and time consuming. Impact damage is always hard to analise until the camera is opened up. ... Norcent Technologies DC-420 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b

... Canon EOS 40D Digital Camera

My Nikon d40x is roughly three years old and the lens has had to have been repaired twice due to it being dropped. Lens is working fine though now. Yesterday i was getting out my car and the camera fell out my bag, the lens still works fine but now the camera is refusing to take more than 1 photo and saying "card is full". Tried my brothers memory card in it and its doing the same although his memory card works fine with his camera (nikon d60). Someone help!

Time for some "tough love"...suggest you buy one of the new Pentax point-and-shoots that are especially made for people who continually drop their cameras. This one can be dropped from 3 feet and still work. Leave the good DSLRs to the rest of us. ... Nikon D40x Digital Camera

Dv 5500 i have a dv5500 digital camera since new i have had a problem with the ok button when i try to advance picture display the button performs a different function only when i press the right sideof the button left side top and bottum work fine camera seems complicated to set features such as flash at night could not figure that out any help would be appreciated can i send the camera some where in newengland area usa for repair [email protected] jerry fasciano 94 nichols st everett,ma 02149

You need to replace the button board in your camera. Regards ... Mustek DV5500 Digital Camera

Canon PowerShot A480 won't take photo. Pressing on button camera on then pressing silver button to take photo when pressed down screen turns black no picture taken. Batteries new. This is the story; camera was working fine then showed low battery bought new batteries took couple of photo's showed low battery again. Replaced battery same thing again but now when pressing button to take photo screen goes black. Camera bought 30/9/2009. Any idea's????

Its just a matter of batteries...some are not powerful enough to operate the camera ....Try to change them and buy some real good ones..like Duracell or Tatra...do not make any compromises when buy the batteries...get the best cause these kinda camer ... Canon Powershot A480 - Silver Digital Camera

Broken Camera Well, I dropped my camera, and tada, it is messed up. It turns on, it takes pictures, but the only button that works is the on/off button and the button to take the pictures. http://www.walmart.com/catalog/product.do?product_id=5634183 is the camera, I've had it for 2 years, so the warranty is up. The setting I had it to before had no flash, so now I can't take pictures with flash. If I could get any help, that would be great!

One of the cables connecting to the other buttons probably came out of its socket. It needs to be opened up and checked 1st. Sometimes maybe there is a crack which needs to mended to restore the reset of the button. ... Kodak EasyShare One Digital Camera

To adjust the focus on the camera you are suppose to press the shutter button halfway down and it will lock your focus in and then press the shutter button again and take the picture. It was working fine and the next time I turned my camera on this option would not work. I try the press the shutter button down halfway the it does nothing. All I can do now it press it all the way to take the picture. I have an Olympus E-420 digital SLR camera.

Hello sir!!\015\012\015\012first try to give it a soft reset.\015\012\015\012to perform it use the settings/restore/ok\015\012\015\012if its not solving ur prob tell me so i can help u further i am a professional ... Digital Cameras

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera

Kodak m893IS is not turning on....the camera was dropped by accident but it wasn't dropped from high it was only like 2 feet...after it was dropped it worked fine for the next 5 minutes but then it turned of but the camera was already on low battery when it was dropped so i didn't think anything was wrong untill i charged it....i kept it on the cord for about 45 minutes and well the kodak logo comes up but then the screen looks navy blue then it turns off again completely. does anyone know what

You may have bent the camera's lens housing, which will require professional repair, but the problem you describe is frequently due to\015\012corroded battery contacts inside the camera. Remove the batteries and\015\012wipe the camera contacts firml ... Kodak Easyshare M893 Digital Camera

I dropped my camera in water, the lense got moisture in it but was working right away. I had opened the inside of the camera to make sure nothing got wet. I set it out to dry. The lense is dry of moisture but the buttons wont work and the camera wants me to input the date. But, since the buttons won't work I can't, and now I can't take picutres.

Get a new camera - you will have other problem besides the obvious ones. Liquid will produce corrosive material after it drys and remain in the camera and will be difficult to remove later. ... Fuji FinePix F20 Digital Camera

Vivitar 5399 not reading memory card. Originally had a 4GB card and that worked fine, then all of a sudden the camera wouldn't read the memory card. Card is fine in other cameras. Just switched to a 128MB card and still the camera does not see anything. Help!

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Vivitar Vivacam 5399 Digital Camera

Eek, i dropped my camera more times than i can count, and hanging around a bunch of rowdy skaters seemed to really do it in. we've dropped it so hard the screen cracked, but it was still working fine. after awhile the crack started collecting dust [ew]. and now this last time, the focusy thing was open when i dropped it and it now refuses to work. i've lost the box and recipt and everything, so i doubt if anyone would replace it, even if i did do the whole 'pay more than your camera's actually w

Non - motorized lens cameras , will survive\015\012\015\012more drops ( ebay it - as is - for parts ) ; ... Casio EXILIM ZOOM EX-Z60 Digital Camera

I have a Nikon D80... a year old. The following functions/buttons stopped working for no apparent reason in the same time frame. - holding the delete and metering mode buttons together to format memory card. (however the buttons independently work fine) - holding the WB button (set to PRE) to set preset white balance. - when camera is on... turning the power switch to the "bulb" symbol to illuminate the control panel on top of camera not working. thank you for any help you can off

You have the latest firmware installed already and you said you updated again just to be sure.Certain button combinations that used to work don't and the buttons work independently.Sounds to me like the BIOS chip itself is cor ... Nikon D80 Digital Camera with 18-135mm Lens

I dropped my camera while it was on and the lens was extended. And I dropped it right on the lens. And now when I turn the camra off, the lens does not go back inside the camera. Everything else is fine, I can see the picture perfectly. It's just the lens that won't go back inside. How can I fix this myself without buying a new camera, or having to pay someone to fix it?

If the cams making grinding or crunching noise the lens housing gears are broke. repair usually not very economical. about 80% the cost of cam when you bought it. ... Casio Exilim EX-Z57 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4515 seconds