Having problems with your Vivitar ViviCam 3330 Digital Camera ?

Problem connecting to PC

\015 Connected the USB cable before downloading the cd and now I get my PC to display that the camera is connected to the PC. Any advice...Thanks\015

Answers :

Delete the program. Go to Program files and delete any remaining trace files. Empty recycle bin. Reboot PC. Re-install CD program. If this fails to rectify problem then check on their website for any updates to help the program and download them. Reboot. If this fails then check if you have any other editing suite programs that could interfere or supercede the program you're using when connecting your camera. If this fails, don't bother using the software on the CD at all as your PC should pick up your camera files via the USB as long as it has been properly updated. Then use Photoshop/or another program to edit your pics.
Repair Help & Product Troubleshooting for Vivitar ViviCam 3330 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Connection Problem My Olympus D-560 would lock when I tried to connect it to my PC, a Compaq Presario 6000 about a year old. Since the camera was brand new, I suspected the computer and spent many frustrating hours uninstalling this and reinstalling that. Finally, I sent the camera back and Olympus did a firmware upgrade, which fixed the problem. Then I stumbled across a post on another board that said that the Oly has problems with AMD processors. Has anyone else had compatiblity problems wi


Just get a $10 multi-function card reader and be done with it all. I don't think I have ever connected my cameras directly to my PC. ... Olympus Camedia C-350 Digital Camera

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

When I connect my camera to my USB port the camera screen says "establishing connection" but it never establishes. I've transferred pictures before onto this same computer and never had this problem. I even bought a new cable because I thought that might be the problem, and it's apparently not.


You can transfer the pictures from your camera by setting the USB Configuration to Disk Drive in the Setup Menu.\015\012I suggest you to reinstall the HP Photosmart software from Software & Downloads on ... HP Photosmart R707 Digital Camera

Download Problems Have had my camera for just over a year and had no problems downloading my photos onto my PC using Windows XP until recently. When I connect the USB cable to the camera the message USB Mode Mass Storage no longer appears on the camera and nothing happens on PC. Have followed all advise in manual, changing the USB connection, disconnecting everything else on PC etc. Havre tried other cameras on PC and they are still working OK, have tried another lead but no difference, have


I HAVE THIS SAME PROBLEM WITH THE CAMERA! This happened to me after getting a new pc with windows xp -- I wasn't on xp before. ... Sony Cyber-shot DSC-W50 Digital Camera

Connection problem im having problems connecting my camera to my computer, it keeps telling me UNKNOWN DEVICE not sure what to do please help.


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Samsung L100 Digital Camera

I have an Olympus tough 3000 wich seems to turn on and off when I try to power it on. the screen goes on and off every second. Not possible to take pictures. (this happens every time unless it have been connected to a computer. read further down) I wondered if a hard reset, installing the firmware once again could solve the problem. I have no problems in connecting the camera to mac computer. It can read whatever that is inside the memory card. If I disconnect the camera after it has been con


Hi,I'm sorry to know that the Camera is turning off and on again. I'll be glad to assist you with this. Please make sure that the battery in the Camera is fully charged and is holding the charge for making the Camera to turn on. You ... Olympus ? Tough 3000 / Stylus Tough 3000 Digital Camera

Transfer problems my camera is connected to my computor via the usb cable but nothing at all happens ie just as if its not connected. i have tried a different computor but again nothing happens. when i attach the flash card direct into a computor i borrowed then no problems at all.


Do what the pros do...use a card reader. ... Nikon Coolpix 5700 Digital Camera

Olympus stylus 770 cable has problem transferring photos to computer. This only started month ago. Once connected to computer, camera screens reads 'one moment' but never actually connects to computer. I've tried it on 2 computers but the same problem. Is it the cable thats faulty? If so, is it possible to buy a replacement somewhere?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Olympus Stylus 770 SW Digital Camera

My camera is having a problem connecting to my computer. I replaced the cable and the new one does the same thing. It will connect if I "giggle" the cable. I believe the problem is in the camera itself.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak EasyShare DX7440 Digital Camera

I have a GE 8.0 megapixel camera E840s. Have always been able to download pictures onto computer with no problems. Now after connecting to computer, my camera says "connecting" but doesn't do anything. Then I get a message about options and if I pick "import photos" it will then begin to import ALL photos which are already on the computer rather than the most current. We deleted many photos to make room, thinking this would help. What's my problem? Thanks.


Your problem stems from the changes Windows makes to the registry every time it downloads updates. Pros avoid this very common problem by using a separate card reader...you should too.\012 ... Digital Cameras

Hi there, i have this canon eos 7d camera with the final firmware. also final version of eos utility is installed on my pc. my problem is, when i connect the camera to my pc with a usb cable eos utility can not recognize the camera. when i use a card reader i can see the pics i took with the camra but i need to connect the camera to my pc so i can make timelaps shoots. any idea to solve this problem? thank you.


Have you tried other USB ports on your computer? Also, try these:\012Solution: Windows should automatically recognize your digital camera and prompt you with a list of possible actions, such as viewing the pictures stored on your memory card. ... Canon EOS 7D Digital Camera

Connection Problem I recently purchased a Canon EOS 20D. When iconnect it to computer and ZOOMBROWSER it keep telling me cant connect as the LCD is on. It is not turned on and I cant get around the problem. I can easily copy the files to folders, but Zoombrowser is so much more convenient. All advise appreciated


I too have a Canon 20D and receive the same message. Zoombrowser works fine with my Canon G3, so the way I get around this problem is by using the other software that came with the 20D called EOS Viewer. This software will download your images every ... Canon EOS-20D Digital Camera with 17-85mm Lens

Camera Connection Hi, I am having problems with my camera connection to my computer. It is hooked up via USB, but my computer is not recognizing the problem. Any tricks or ideas I can use to get it going?


Two things:1. The USB cable where it connects to the camera has to firmly in place otherwise it can disconnect from the computer even though it appears to be connected.2. In the HP 635 'Set up' menu there is a section called U ... HP Photosmart 635 Digital Camera

USB connection The computer cannot access the Memory Stick® media in the camera when connected with the USB cable. I connect the camera to my computer using the USB, then after 10 seconds its says there is no device connected to the computer, and then it gives me option to cancel, retry, or continue but it usually connects automatically itself again. The only problem is that I can't do anything with pictures can't copy, delete, or view them. I'ce already tried to delete and reinstall the driver.


I would invest in a memory card reader. You can pick one up for under $20. Using a card reader allows you to avoid having to deal with drivers and such that may or may not be loaded on your PC. A card reader should work just fine for ya. Good luck ... Sony Cyber-shot DSC-W50 Digital Camera

Video Format Problem includes:  Canon Powershot SD1000  iPhoto '08 Connecting camera via USB Status:  Downloading Images = no problem  Downloading Videos = Problem  Downloading Images & Video = Problem Story: When trying to download videos from Canon SD1000 to iPhoto '08 a problem occurs. iPhoto crashes once it trys to import video into iPhoto. Upon relaunch iPhoto identifies photo files which were downloaded before crash and photos on camera and downloads duplicates until it tries to download v


I've been having the same problem. It must be because of an iPhoto update because I transferred lots of videos to my Mac via iPhoto all spring and summer and never had this happen. If you open iPhoto and select preferences and then in the ... Canon PowerShot SD1000 Digital Camera

I am connecting my sony cybershot camera to my pc but it is not read and i lost my installation cd ...when i downloaded the driver from the site there is an error telling me to be sure that the camera is connected and on although i am connecting it and turning it on !!!! my problem is how to make my computer feel that it is connected to my camera ..can you i get help ??


Having gone over two months without a reply to my query, I assume my suggestion to use a card reader solved the problem. ... Sony Cybershot DSCW310 Digital Camera

Problem: I have a problem with sony cyber-shot DSC-S500. I could not dowload any files from the Sony cyber-shot to my pc (windows 7 system). I try to connect to a dvd player, and I could see the files stored inside sony cyber-shot card memory. Is there a problem with usb drivers? Where could I get them and fix the problem. Thank you.


Hii think your cam got viruses and u need to check it with antivirus 1 - connect the cam to computer2 - scan the cam with your updated and registerd anti virus ... Sony Cyber-Shot DSC-S500 Digital Camera

I have D-link DSC-350F, when I connect with my computer, camera display PC,While PC said camera not found may be USB cable not connected properly, but its already connected thats way, camera display PC, its mean its connected,please help me to solve this problem for use my camera. my operating system is windos Vista


Solve all your problems by using a card reader. ... Digital Cameras

Casio EXILIM ZOOM EX-Z60 problem with not being able to get the LCD working after dis-connection and re-connecting the connectors


The LCD will not show the picture until you put the ribbon all the way inside the connector\015\012Hope this helps\015\012Joe ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

I am not able to connect my Ricoh Caplio3 camera to the laptop. There was a problem in the sensor. So, thats been changed. Do you think this change is causing this problem? What to do to solve this problem? Please advice. Many thanks in advance.


If all you need to do is download your pictures, get a card reader. ... Ricoh Caplio R3 Digital Camera

Hello, My olympus sp-500uz has more and more problems with connecting to my PC. Some USB ports don't work any more(front connection) and the back connection works sometimes but getting my pictures on the PC sometimes doesn't work and if it works it takes far too much time, say about 10 minutes for 8 pictures. Any idea what's going on? Thanks


Many people find it more convenient to just take the memory card out of the camera and put it in a card reader, especially now that these readers are built into computers and printers. That would be a "work around" for your problem. As to ... Olympus SP-500 UZ Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

Connecting problem After connecting the USB cable to the computer and the button is pressed, it says: connecting to computer, but it doesn't happen. The green light on the camera blinks and repeats blinking, but nothing happens. Using Vista and initially, the spinning circle appears but nothing happens. Used installation disc but it does not download, in that when we go to cameras & printers on our control panel, the printer shows, but the camera doesn't. We were able to download pictures at one


... Samsung Digimax D53 Digital Camera

My camera always connects automatically and downloads pictures that haven't been downloaded to the computer when I hook it up to the cable. Today, I tried to upload my pictures and I connected everything correctly, turned on the camera and it said "connection error". Could this be a problem with my computer or is it that I have to reinstall the program?


Use a card reader instead of your camera. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0959 seconds