Having problems with your Vivitar ViviCam 35 Digital Camera ?

Webcam. i bought this camera more than a year ago, and for a while i have been trying to install the webcam settings, however it always says "check hardware" what does it mean by that?


Answers :

Make sure the cam is hooked to the computer properly then go into your Vivicam files open the PCCam folder, click the Capture tab, Scroll down to Master Stream. Make sure video is checked. Hope this is helpfull.
Repair Help & Product Troubleshooting for Vivitar ViviCam 35 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Webcam. i bought this camera more than a year ago, and for a while i have been trying to install the webcam settings, however it always says "check hardware" what does it mean by that?


Make sure the cam is hooked to the computer properly then go into your Vivicam files open the PCCam folder, click the Capture tab, Scroll down to Master Stream. Make sure video is checked. Hope this is helpfull. ... Vivitar ViviCam 35 Digital Camera

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

HI I am using Intex IT 305 WC webcam and I lost the drivers. I have the install the same again. I am downloading from Brothersoft and rapidshare and even from Intex also. But after downloading, I am getting an error saying Video Capture hardware not found. I installed even Cam splitter also but of no use.So can anybody help me regarding this pls in getting my webcam working properly..Even mail can be sent on [email protected]


... Digital Cameras

Ive reinstalled the software for the GearHead 535i and extracted it from the zip folder however, when I go to the control panel and select add new hardware it prompts me to either search for software or manually select, I select the driver I installed from my files and click search/install but the installation wizard still says it cannot install my cam because no software was found. I need this to run, what do I do? whats wrong with it?


What I suspect is happening is this...the orginal Software was installed in a different folder/target than the zip files installed it. Control Panel may be looking in another location, even though you selected the driver. What I'm wondering is ... Digital Cameras

I was installing my new webcam but it wan't work, i tried to check it thru amcap but give a error say's VIDEO CAPTURE harware was not installed, i tried to reintall the driver but same thing came out.


... Digital Cameras

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

I have a Samsung PL100 (Dualview). I'm having trouble uploading my photos to my computer using the USB. I have installed the CD that came with the camera (InteliStudio) and when I connect the camera and computer with the USB cord, the red indicator light lights up. However, nothing else happens. The User's Manual says that it should automatically connect and the computer should be able to recognize it. It doesn't. I have tried different settings in the Menu and still nothing happens. Please help


I find that alot of times using the camera to unload your pictures to your computer is more trouble them you need to worry about. i say you just pull out the SD or SDHC card and plug that into you computer. if you dont have an SD or SDHC card reader ... Samsung DualView TL205 / PL100 Digital Camera

Over exposure My camera was working great until about 2 months ago when I tried taking pictures outside and they were over exposed. I checked my settings and they were normal ( always keep it on automatic); however, I even changed them yet my pictures outside or inside (in bright light) are all over exposed. What could be the cause of this problem? Thanks!


Same exact problem ... Canon Powershot SD450 / IXUS 55 Digital Camera

Hello - having issue with Epsom R310 printer. Appears does not want to spool paper to print for me. Have done nozzle check and it works ok then however seems doesn't want to do print jobhs. Message says to set paper properly and try again but won't work.


... Epson PhotoPC 3100Z Digital Camera

We have a new custom build PC from Data Doctors for personal use with Vista 7 and have a Samsung SyncMaster 191t monitor that was previously used for gaming and had a DVI cable. We bought a VGA cable but the Samsung monitor just says Check Signal Cable. We also tried using a VGA to DVI adapter, but that didn't work either. The monitor didn't even say check the signal cable then; only the green monitor light kept flashing. Is there a setting inside the SyncMaster 191t that would be previously set


You have to check the hertz of the monitor, lower the hertz to 60 hrtz and it will be fine ... Digital Cameras

My webcam i go to use my webcam and it come up error and says "this application has failed to start because kdu_v32r.dll was not found. reinstaling the application may fix this problem I cannot open my id on yahoo messenger so i did was re install the messenger but before it was completly finish it says that kdu_v32R.dll was missing and by reinstalling it again, it will fix the problem. I did as the command says but i end up with the same problem. I cannot open my webcam when im using the messe


Try posting problem in the correct area, this one is for Canon Digital Cameras. You may get the response you are looking for. ... Canon Rebel XT / EOS 350D Digital Camera

I bought this webcam A4Tech PK 836-MJ. The specs says that it can be installed for Mac OS 10.4 and later.. Unfortunately, I updated my Mac OS to 10.5 a day before I bought the webcam. Now it won't install itself. Is there a driver that I can get for me to use the new webcam I purchased? Please help for other possible options. Thanks!


Http://driverscollection.com/?H=PK-836MJ&By=A4Tech ... Digital Cameras

My name is Chris and my wife just bought a Panasonic DMC-TZ5 digital camera. I was trying to install the hardware to my computer and have the installation disc. Everything is loaded onto my computer, but my computer consistently says that the "USB Device Not Recognized". I went to troubleshoot the problem and it says that "there are no drivers installed" in my USB port. I'm currently using Microsoft XP Professional. I'm running out of options. I'm not sure if my computer is compatible with


I use a memory card reader (about $15) to retrieve photos and toss the software that comes with the camera.\015\012\015\012Another possible solution would be to go to panisonic.com and download the latest software.\015\012\015 ... Digital Cameras

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

I've switched from a PC to a Mac and have installed the G9 Solution Disk on my Mac, however it doesn't seem to be working, I can't download photos to my MacbookPro, nothing happens when I connect the camera to the computer. I have checked and the camera is in playback mode. The software looks like it installed successfully however when I try to run CameraWindow it runs forever basically doesn't start.


Use a card reader to download the pics to a folder you create on your desktop. From there, you should be able to import them to any program you wish...even iPhoto. ... Canon PowerShot G9 Digital Camera

I can't transfer my pictures in my dsc-w310 digi cam in my pc. It always say that i need a PMB portable installer. I tried to download an installer but it says that my PMB had insufficient space. what will i do to copy mi pictures?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Sony Cyber-Shot DSC-T5 Digital Camera

Hello. I bought my Powershot SX1 IS in April 2010, and have never felt I could get good photos with it. The 'noise' seems bad, when I playback and zoom in just one notch, definately worse, the more I zoom. The color is often poor, and the focus on close-ups is not sharp. Would you say this is the best this camera can do, or would you say there is something wrong with this particular one. (I always have it set at highest resolution , often 100 ISO, try the set of three exposures to get diffe


Hi,You will get more information about this camera on the link belowReview LinkAnd yes, your doubt is correct. It is because of the ... Canon PowerShot SX100 IS Digital Camera

I recently bought a Canon powershot SX200is and I was using it to photograph my 4 year old grandson's birthday party, however a lot of the shots were blurred, these were mainly taken indoor, when I checked the camera settings I found the speed settings were ranging from 1/60sec to 1/6sec. I was shooting in P and AV, however I then switched back to automatic (auto) and took shots with the full range of options and still found some shots blurred, I think the problem is, the camera is trying to foc


I don't know your camera but on my fuji there is a setting that changes the "film speed". If it is set too low such as 100 or 200, it will make the exposure take too long causing blurry photos. The higher the number, the faster it is. Wor ... Canon Digital Cameras

I do a lot of presentatins an my camera is always letting me dow. The problem is the flash doesn't always work. I put the camera on the 'P' setting. I was given the camera for a Christmas Prtesent and unfortunately I have mislaid the instructions so the functions of the settings do not mean anything to me. Can you please advise. The model number is AX480.


"P" is Program mode. The flash won't pop up in this mode unless you tell it to with the manual flash button.\015\012You might be better off starting in Av (Aperture Priority) mode and choosing the depth of field you want via the aperture setti ... Digital Cameras

I have had this camera for several years now but only recently put a mem card in it. It just keeps telling me to check card. I have tried 2 or 3 cards and reset the menu settings a few times but still always the same message. What's up? Today I tried to download a few pics from the internal memory but my HP solution centre tells me that there is no mem card in the device even though I have down loaded from the internal mem several times in the past. I checked the settings in the cam and they see


Hello. After you put the memory card into the digital camera you must go into the menu and find the format button. When you push it, it may ask if you want to erase the contents of the card. Answer yes. Once your card is formatted it should work ... Vivitar ViviCam 3740 Digital Camera

External Flash I set my Epson 3100z camera to manual mode and set up the camera for external flash. I manually set the shutter speed to 1/60 sec and the aperture to F4. I also set my SunPak flash to F4. My exposures seem pretty good. However when I review the various photo info's, the aperture reading is F5 or F4.8 not the F4 I set. Why is this? Anyone experienced this? The shutter speed are also not always what I set on the camera.


Be carefore that the stopping-down of aperture due to zooming to tele-photo. Flash compensation may be needed. \015\012 ... Epson PhotoPC 3100Z Digital Camera

I have a Nikon D50. When i go to class to learn about my settings they tell me to set my shutter speed. However i can't find where that setting is to set it for say one second. Do i only have presets? like on my dial?


Turn the mode dial to S or M. Then you can turn the command dial to select the shutter speed. ... Nikon Digital Cameras

The shutter speed priority setting on my Canon 40D keeps jumping to a different speed that I haven't set. E.g - set at 200, jumps to 25 when I go to take a photo. I have spoken to Canon regarding the problem and they have suggested that I clear the user settings. This initially solved the problem for all of an hour, but the problem has now started up again. I'll probably be sending it in, as I think it might be a problem with the hardware, just thought I'd check here first. Any suggestio


Maybe you also can check the auto bracketing is turned off. ... Canon Digital Cameras

I have the Aiptek Mega Cam (also known as Aiptek Pencam 1.3) together with the install disk. I can install all fine in Windows Xp but no way to have it done in Vista. When i put the disk in my vista PC, it installed Mega Camera Manager but when i opened it always show " The computer can't connect to your camera!". If i do the same in Windows XP everything goes smoothly and it show pictures is inside the camera. Event when i try to brows the driver when vista open the window says "found new hard


... Aiptek PenCam Mega 1.3 Digital Camera

Webcam disconnected I was chatting and using the webcam when the internet line was cut, when I log in again, the webcam says it's not connected, or the software is not installed, how can I correct this matter?


Are you running windows? If so try "safely removing the hardware" by clicking on the green icon next to the time. After it says it is ok to remove it, unplug the webca and plug it back in.If that does not work, go into control panel, system, ha ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2915 seconds