Having problems with your Vivitar ViviCam 3915 Digital Camera ?

WANT TO TRANSFER PHOTOS FROM CAMERA ON TO MY COMPUTER, DONT HAVE THE CD BUT HAVE USB CABLE, SAYS DEVICE NOT RECOGNIZED, HELP


Answers :

Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.
Repair Help & Product Troubleshooting for Vivitar ViviCam 3915 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

WANT TO TRANSFER PHOTOS FROM CAMERA ON TO MY COMPUTER, DONT HAVE THE CD BUT HAVE USB CABLE, SAYS DEVICE NOT RECOGNIZED, HELP


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connecte ... Vivitar ViviCam 3915 Digital Camera

Problem transferring photos to computer...........I transfer many photos on a daily basis but since yesterday evening, can't figure out the problem. Camera works fine, USB cables are OK. On a couple occasions(I've tried many times) computer says it does not recognize device. I pulled up Nikon Transfer didn't see anything there. I don't know what to do next. Do you?


Hi.Please go through the following troubleshooting:1) Disconnect USB cable and replace camera batteries with fresh ones.2) Test using a different USB cable. The cable is a standard USB to Mini USB, available in most came ... Nikon Digital Cameras

My photos won't transfer to my computer. The the last time I loaded photos onto my computer which was last week, it worked fine. however today the same computer says it does not recognize the USB device, so the camera wizard will not come up. I work in a office so in tried several different computers, none worked. some say usb not recognized, some say there is a power surge at the hub, whatever that means. So bottom line is I'm not able to get my photos onto a computer. What changed since last w


Change the USB port. If you are connecting it to front USB of your computer, try connecting it to USB port at back of computer.. \015\012\015\012The cable might be fauty. ... Kodak EasyShare C330 Digital Camera

My usb cable won't allow me to install my camera . I put the usb cable into the computer. It comes up with saying found a new hardware but an unknown device. Windows found the drive but your device encountered an error while attempting to download it. help.


It may or may not work, but try installing as Administrator and setting the program's EXE into "Compatability Mode for XP SP2",and also, running as Administrator. Windows 7 just doesn't want to support any hardware over like a year old... Drivers ar ... Vivitar ViviCam 8025 Digital Camera

I have a macbook and i connect the usb cable to upload my photos, but the usb is not recognized do i need to download any software. Its says that mac autmatically recognized the camara


The Mac normally recognizes the camera and launches iPhoto.Try launching iPhoto, then plug in the usb cable. Make sure the connections are tight on the camera end of the cable. ... Fuji Finepix Z20fd Digital Camera

USB Error My computer will not recognize my usb device that came with my camera. I also tried with another usb device from a different camera (same model) and it still did not work. My camera has the message USB error and my computer generates the message: 'USB device not recognized. One of the USB devices has malfunctioned and Windows does not recognize it'. I received the same message with both USB cables. I thought that I may need to install the drivers for my camera, but my computer does no


Are you turning the camera on after you plug it in to your computer? You should do that with all your USB devices. Let me know if that helps. Feel free to rate my answer.\015\012\015\012Rob ... Polaroid i735 Digital Camera

When I plug in my usb cable i get and error saying one of the usb devices attached to this computer has malfunctioned, and windows does not recognize it.


Having gone over four months without a response, I assume my suggestion to use a card reader solved the problem. ... Canon PowerShot S1 IS Digital Camera

When connecting camera to computer via usb message says; usb device not recognised there's been a malfunction and windows doe's not recognize it. Any help appreciated Macsco


Do what the pros do...use a card reader instead of your camera. ... Fuji FinePix S5200 / S5600 Digital Camera

Hi ! I tried uploading some pictures to my pc but the computer says "no new pictures or videos were found on this device".Even when i accessed the device through "my computer" it was empty when in fact there are about 300 pics stored on my camera (canon powershot SD900) what should i do? The first time i used a USB cable and the second time i inserted the card into the computer but that dint work either . help !


U try reprogram ur gadget, ... Canon PowerShot SD1000 Digital Camera

Cable connected to camera and USB cable site and computer says it's not 'connecting' (to download photos). This is a Canon Powershot A520 and I've not had this problem before - though sometimes it's been slow to get going... but it's not doing it at all today after several trys. HELP, Please!


Blame Microsoft updates. Use a card reader to download your pictures to a folder you create on your desktop. ... Canon PowerShot A520 Digital Camera

I have a Samsung PL100 (Dualview). I'm having trouble uploading my photos to my computer using the USB. I have installed the CD that came with the camera (InteliStudio) and when I connect the camera and computer with the USB cord, the red indicator light lights up. However, nothing else happens. The User's Manual says that it should automatically connect and the computer should be able to recognize it. It doesn't. I have tried different settings in the Menu and still nothing happens. Please help


I find that alot of times using the camera to unload your pictures to your computer is more trouble them you need to worry about. i say you just pull out the SD or SDHC card and plug that into you computer. if you dont have an SD or SDHC card reader ... Samsung DualView TL205 / PL100 Digital Camera

Computer all of a sudden won't recognize my camera. Says device not recognized. When I plug into USB port my camera starts flipping back and forth showing processing and then showing the screen you seen when you take a picture? Help!


Have you considered NOT connecting the camera to the computer?The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the ... Kodak EasyShare M1033 Digital Camera

My computer does not recognize my cable from camera. It says the usb device has malfunctioned and windows does not recognize it.


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Samsung Digimax D53 Digital Camera

I have the Mitsuba DC500T Digital Camera what do i need to do to download the pitcures from the camera hard drive. I have windows 7, when i use the usb cable to download I get an error that says unknown device. I installed the disk that came with it. help please Lenoard Brown


Hi. Make sure that the disk driver you are trying to install is compatible with windows 7. If the driver is not compatible with windows 7 then that is the error messsage that you will be getting. ... Mitsuba DC500T Digital Camera

Olympus FE-320 Digital Camera will not transfer photos to Computer via USB port hook up. When connected and PC or Transfer selected, screen message on camera says "Wait" and never connects. When Olympus Master 2 program opens on computer it does not recognize Camera Connection and continues to search for Camera so no images can be transferred. This combination did work in the past but has stopped. All updates have been applied. Need help.


I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for ... Olympus FE-320 Digital Camera

Pics on my My Nikon S600 will no longer download on to my computer via the USB cable. The 'Photo Wizard' (or similar name) pops up but immediately goes away again and a message comes up saying that the devices are not properly connected. This never used to happen. My Microsoft Outlook email has also started to open then go away immediately. I have restored all my settings but don't know what's wrong. Google etc still fine. Any clues as to waht i can do?


A couple of suggestions here, if you have recently switched to using WIndows 7 you will have to download drivers for your Nikon so they can read itl. \015\012If you have not changed any of your software or using the same computer, your ports mi ... Nikon Coolpix S600 Digital Camera

WHEN ATTEMPTING TO DOWNLOAD PHOTOS FROM MEMORY USING THE CAMERA AS READER, WINDOWS WARNS "USB DEVICE NOT RECOGNIZED" I HAVE REPLACED CABLE AND TRIED DIFFERENT COMPUTERS.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Sony Cyber-Shot DSC-S30 Digital Camera

HOW DO I DOWNLOAD PICTURES THE SOFTWARE KEEPS SAYING THE DEVICE IS NOT READY AND WHEN I PLUG IN THE USB CABLE THE CAMERA HAS THE LETTERS IN THE WINDOW PCC CAN YOU HELP THANKS


Please Check Cable PCC) There is damage to the cable.Try downloading by removing the card and using a card reader. You should acquire a new cable if you want to download the old way.PLEASE rate my help++++Thanks for using FIXY ... Largan Chameleon Mega Digital Camera

A730 camera im trying to download pictures from this camera and im using windows xp.when i plug in the camera i get the message saying usb device not recognized,i called ge and they had no clue.can you help.


Has the USB cable been inserted into the camera the wrong way? How many USB devices are attached to the computer?\015\012\015\012Trevor Gordon\015\012Senior Customer Tech\015\012General Imaging Company\015\012(Exclusive ... GE A730 Digital Camera

I cannot transfer photos to my pc. I get a message that says the device that is plugged into the usb port isn't recognized by my pc.


If your camera uses memory cards get a cheap usb card reader. it's faster and less frustrating. The computer will see the reader as just another drive to open, no soft ware necessary. ... Digital Cameras

Problem ddv-v1 Hello, I need that to deliver the driver and the controllers of the chamber(camera) I shape DigiLife ddv-v1. Please. It(he,she) is that I connect the cables usb and says to me that it(he,she) does not recognize the device and controller. I wait for his(her,your) prompt response for the mail [email protected] Thank you very much


La verdad no se entiende tu problema se mas especifico charly ... DigiLife DDV-C330 Digital Camera

Canon EOS400D can't access EOS utility, computer says camera not recognized. I've updated drivers for Vista OS, still no success. can't change owner name in camera as can't access EOS utility, cna't download photos from camera with usb calbe......help? Robin


... Canon Digital Cameras

When i put the cable in the computer and i turn on the camera i can't get of photos from camera because it says unknown usb device?what's the problem


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak Easyshare C813 Digital Camera

I get a message saying usb Device Not Recognized so Ican't download my pictures Can you Help?


Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Fuji FinePix S1000FD Digital Camera

Want to download photos from my D40 to my pc. Error say: usb device not recognized.


Get a card reader and see if you get the same response. ... Nikon D40x Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4043 seconds