Having problems with your Vivitar ViviCam 5018 Digital Camera ?
I insert memory card, and camera says sd card not ready, change to internal memory. how do i make it work?
This little SD card has a sliding button on the side, make sure it is set to unlock.
Repair Help & Product Troubleshooting for Vivitar ViviCam 5018 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I insert memory card, and camera says sd card not ready, change to internal memory. how do i make it work?
This little SD card has a sliding button on the side, make sure it is set to unlock. ... Vivitar ViviCam 5018 Digital Camera
Hi.....i am havimng a problem with my memory card PNY Optima SDHC 8 gb class 4......i have been using it in my sony camera....its was working fine at the start but recently after when i inserted the memory card in my camera it say "system error" or "error formating memory card".....i tried other memory cards in my camera and it worked..so i thought to formating my card using my camera usb cable but when i inserted the cable to my pc it says your disk is in read only format and make sure its ch
You will most likely find that your camera will work with cards up to a certain capacity e.g. 2gband not with cards of higher capacity. What this means in effect is that high capacity cards are not compatible with your camera. It would be inter ... Digital Cameras
I have a Kodak easyshare m320 which I recieved today. I bought an SD card to go with it because the internal memory is really small. Near the card port, it says it accepts SD cards, and it also says this on the manual, but the card I bought for it is not being read by the camera. I can put the card in my computer and it works fine, though, so I don't know what the problem is. Do I need to do something to my camera in order to make it use the card rather than internal memory?
First, with no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert the card and do the "format" thing again to optimize the card for the camera. Now, it should work pro ... Kodak EasyShare CX7430 Digital Camera
Hi. We have bought a samsung es30. The specs on the dealers webside says that there are 6 mb integrated memory. Then we turn onthe camera it says that we shall insert memory card. I believe that it would work without a memory card, but we can´t seem to make it work without. HELP !!!
The internal memory is very small and is only there for a couple of test pictures. You should be using a memory card. ... Digital Cameras
Memory issue Its own internal memory works fine but when I put a new sandisk 4GB sdhc class 4 into the camera It asks me to format it. so when I continue to format, it says memory card unusable [insert new memory card] so i tried using a micro using an adapter and got the same resaults. Does this sound like a camera issue or memory?
Please confirm the model # so that I can check whether the large capacity memory cards are compatible with your camera. ... Kodak Digital Cameras
My Sony W330 keeps saying I need to re-insert my memory card. I have re-formatted my memory cards and check they work in my video camera. I have inter-changed them before and have used all of them before in this camera.
... Sony Cybershot W330 Digital Camera
When I insert the SanDisk memory card in theDSC-T50 camera ,and try to take a picture,it reads no memory space in stick whilst the stick is empty,having previously deleted the contents and checked that it is empty on my PC.The camera works alright on its internal memory.When I switch to read the contents of the stick it says no memory space in stick.Your help please Samir Tawil
... Sony Cyber-shot DSC-T50 Digital Camera
My Lumix DMC FZ30 use to work using a 4gb SDHC SanDisk card, but now says, "Memory card error please check the card". However, the card works fine in any other cameras. A small pocket Fujifilm camera for example. I was told to reformat the card in the camera, but I'm unable to use any part of the FZ30 camera while the card is inserted and on. Please help as I want to use my 4gb card and not just the 2gb ones which work fine so I know it's not a problem with the camera reading memory cards, just
Memory cards have a limited life. If you've been using it a lot and erasing it or formatting it, it probably is just worn out. Take it to a camera shop and try a new card. If that works, go to a discount store and buy a new one. It will cost less ... Panasonic Lumix DMC-FZ30 Digital Camera
When I insert my sd card into my camera it says memory card inserted please change to internal ram.. What will I do?
I think you may mean it says 'no memory card inserted...'etc. but most cameras don't need to say this when there really is no card in place - if there is any internal memory they just switch to it automatically. Perhaps the garbled message is because ... Digital Cameras
I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"
Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras
I have a Kodak EasyShare v1003 and when i turn it on it says Reading memory card!! then it says Memory card needs Formatting.. when i format it it then says Memory card is unusable insert new memory card... so far i tried 3 different cards and no luck.. all the cards work on my other camera's but not this one>> Help Thanks
Format ur card in different cam ... Fuji FinePix A500 Digital Camera
Nikon COOLPIX S710 stops working after battery and/or memory card are removed. I have reformed the memory card (no change). Purchased 2X new batteries (no change). One of the original batteries will allow the camera to work, directly after a fresh charge, but not after it is removed, unless directly after insertion from being freshly charged. Have checked all 4 different batteries and voltages all appear at of above specified 3.7 VDC. Still only one of the 4 will ever allow the camera to functio
A voltage test alone cannot determine if the battery is good unless you can have the current rating of the battery tested. So if the camera comes on after a charge it seems that the battery is not retaining current for the camera to boot on.\01 ... Nikon COOLPIX S710 Digital Camera
I have lost my manual on my C743 EasyShare Zoom digital camera, and I don't know how to get my photos which are in the internal memory transferred to the Kodak memory card so that I can insert the card into the appropriate card slot on mt HP Officejet Pro 8500 All-in-One Printer and bring the photos over onto my computer. When I remove the card now and insert it into the printer, my computer says there are no files on the card. But, I can press "Review" on the camera, and I can see the ohotos.
Hi there.....\015\012\015\012here is the link from where u can download the manual.....\015\012\015\012 ... Digital Cameras
My camera won't regognise my memory card: although the memory card is in the camera, on-screen it says "int" which i know means photos will be taken on the internal memory, as if there's not a memory card inside. When i put the card into my computer, the photos i have taken show up normally. This happened once before and i was told to replace the memory cardwhich i did. It worked for a while and now is doing the same again. The memory card only had about 50 photos on it when this started to happ
With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, your card should work properly. ... Samsung Digimax S800 Digital Camera
My olympus 8010 will not accept my memory card. Whenever it turns on it says it want to format the card and when I try to format it it says card error. Internal memory works fine. I can't do anything when the internal card is inserted.
Remove your card and place it in the carrd reader of your PC. Now try to format and clean off the files. If it is not detected clean contacts and try if not the card can be defective. ... Olympus Digital Cameras
My z950 is not reading my memory card. I got it a couple of weeks ago and it was working fine. I took my memory card out to print pictures and when I put it back in, the screen keeps saying internal memory full and showing the pictures on the internal memory. I keep taking it out and putting it back in and turning the camera on and off, but it's not working.
Make shore the memory card is out of the camera and reformatte the interal memory and reset the camera ,turn it off and put the memory card back in it should work now. ... Kodak EasyShare Z950 Digital Camera
I have a Sony DSC-H7. After removing the memory card to process some photos at a local walgreens, I went to re insert it, and after I did the camera doesn't seem to read the memory card(SanDisk ProDuo 2.0 Gb). I went to the Internal Memory tool on the camera and it only shows an option to format the cameras built in memory space. I have heard these cards can just go out but I want to make sure there is no option of reformat. Thank you!
... Sony Cyber-shot DSC-H7 Digital Camera
Memory card I bought a Photosmart 435 which I never could get to recognize that the memory card was inserted. I even bought a 2nd card thinking that the first must be broken. That did not work. I bought a 425 and I am having the same problem. What is the secret to making the camera "see" that a memory card is inserted? The 425 tells me that the memory card is not formatted and will not let me format it. HELP....... I am so discouraged that I want to go back to FILM.
Well theres a little think on my memory card, its on the side and it can move up and down, its a lock, so you dont accidentally delete any pictures or anything. but that could be the proble,\015\012\015\012i have a sandisk 256mb ... HP Photosmart M425 Digital Camera
Memory card My brand new camera, EasyShare C613 refuses to aknowledge that I have installed, and formatted a 256 SD card in my camera. It just says internal memory is full, and no memory card is installed. This worked in my old camera, but why not in the new one? I am restricted to taking 8 pictures.
If the card has not been formatted to remove data, it may have info that is not compatible between your old and new cameras.\015\012\015\012If you have a USB card reader, place the card in it and re-format it.\015\012\015\012I ... Kodak EasyShare C613 Digital Camera
I inserted a 4GB SDHC card, clicked ok when prompted. clicked "yes" when asked to set SD card as default. took the SD card out and put it into my own camera. my camera said there were no images on the SD card. the photo machine at my local Boots store also said there were no images on the SD card.Tried NOT setting the SD card as default and it still didn't save any images. What am I doing wrong??? vtech internal memory works fine. I just want a bigger memory capacity for the camera!!! From Hel
I assume that the camera is not compatible with SDHC cards and will only work with normal SD (upto 2GB) cards. ... Vtech Kidizoom Digital Camera
Videos play on camera, not on computer. Why? How to fix? I took SD memory card out of camera, plugged into computer, copied direct to computer. The video files never play. the Intelli software required to transfer and convert video files to make them work properly? I changed form Windows XP computer to a new Windows 8 computer. Also, a separate issue on another SD memory card, copying SD memory card to computer, many files not recognizable, can't locate. Might be problem with that SD card. This
... Samsung PL200 Digital Camera
We cannot get the camera to use a memory card. When we insert the memory card, it says the internal memory is full. We don't want to use internal memory. We want to use the card.
Look at the cemra settings - you can choose what memory to use - Internal memory or Auto. Choose the Auto and restart the camera. Hope this helps.Tom ... Kodak EasyShare M1033 Digital Camera
Iam using KODAK EASY SHARE C43.When I inserted a 2GB micro SD memory card for the first time,it is saying 'Memory Card requires formatting' as usual.While clicking OK, It shows 'formatting.....' and then it says 'Memory Card requires formatting' again and again as before.....(I think the formatting function is not working properly in my camera).I cannot use an external storage space for the best experiance.What should I do ? Please help me....
The best thing would be to borrow a laptop or PC with a card slot, and format it there. \012If it continues to show error when formatting, the card is defective and should be replaced. (Returned?) \012Out of 5 memory devices I have bough ... Kodak EasyShare One Digital Camera
Memory Card I recently wiped all the pictures off my memory card and now when I turn the camera on it says 'card not initilised'Have looked through the set up menu and still don't no how to make it work!!!!Something happened when I was downloading some pics off my Fuji FinePix A330 digital camera where I wanted to only save some of the photos and delete the rest. Well I hadn't turned off the camera or unplugged it yet, so I guess somehow I deleted something labeled "fuji...". When I realized the
Have a look in the camera menu for the format or initialize card option, (sorry i cant be more specific - cant find the manual) this should initialize the card, else use a usb card reader to format the card in a card reader on your compu ... Fuji FinePix A330 Digital Camera
Just bought a 16 gb memory card for my panasonic lumix tz5- when i inserted it , it says memory card parameter error- this camera is supposed to be able to take a 16 gb memory card, but it wont. works fine, however, with a 2 gb. but one of the reasons i bought this camera was to be able to use the 16 gb- any solutions?
Try formatting the card.As I am not familiar with the Panasonic cameras, nor did you say what card type you were using, I cannot give specifics on what to format it to (if using a computer) or how to do it through the camera, which may ha ... Panasonic Digital Cameras