Having problems with your Vivitar ViviCam 5386 Digital Camera ?

I had to have a new hard drive and have been reinstalling programmes. It says the driver for the 5386 is installed but when I plug the camera in it says a problem occured and it might not work properly. I have unistalled, reinstalled rebooted but I still get the same. Please can you help. Many thanks. Frances

Answers :

Use a card reader instead of the camera.
Repair Help & Product Troubleshooting for Vivitar ViviCam 5386 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I had to have a new hard drive and have been reinstalling programmes. It says the driver for the 5386 is installed but when I plug the camera in it says a problem occured and it might not work properly. I have unistalled, reinstalled rebooted but I still get the same. Please can you help. Many thanks. Frances

Use a card reader instead of the camera. ... Vivitar ViviCam 5386 Digital Camera

The usb port on the camera no longer works. I believe I unplugged it "hot". I've used it regularly for years but ever since unplugging it without ensuring it was properly "stopped" using the computer's "safely remove hardware" function three days ago, the camera is no longer recognized when I plug it in. The usb port still works on other detached items.I've tried to upgrade from the net and to reinstall the camera's usb driver from my install disk and in both instances I get the message it doesn

Hi there,\012Well you done most of the solutions......... anyway problem is most likely in your camera, you can try a last solution before going to repair it, remove the battery from your camera and turn it off for 24 hours (it helps you ... Olympus Camedia C-4000 Zoom Digital Camera

Hello, My Canon EOS 300D has no display and says busy in the view finder and in the lcd screen also. The focus and flash still work. Can you please tell me what could be the problem. I have taken out the battery and card and it does not change anything. It was working properly but suddenly it does not take any more pictures... i read some of your comments to change the firmware but i was not sure for that i wanted to take your opinion... thanks Mirdash

Hi\012I think your unit has memory card receptance unit bad.( the CF card inserting area pins---bent and shorting), or some of loosen screw moving around and shorting. Mostly it is the pin problem. Your local repair shop would charge around $50 to ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm and EF 75-300mm Lenses

After downloading the driver for mega +2 it says there is a problem with msvcrt.dll then when i try to restart it says the procdure entry point resetsklf could not be loaded and then will not start the pointer moves but that is all ive had to reinstall windows xp 4 timemes today and still dont have it working yet. can you help

You need to reinstall the msvcrt.dll file. If you have the WIn XP disc let the computer boot from the CD.Follow these directions:http://support.microsoft.com/default.aspx?scid=kb;en-us;Q324762 ... Largan Mega 2 Digital Camera

Communication error i can take pictures and it stores on the camera but when i try to upload them it says communication error. i saw someone had the same problem but when i clicked on the link it could not be found. i also reinstalled my software and it still did not work.

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Fuji FinePix Z10fd Digital Camera

I have a sony cybershot camera, i took it into the mountains the other day, and it has not been working properly since. every time i turn it on the lens comes in and olut multiple times and says, "turn the power off and on again." i can still look at pictures on it, but am unable to bring up a menu or take any pictures. i have recharged the battery and let it warm up, but nothing seems to change anything.

DSC-W120===============Hi,You need to replace lens assembly in camera to get it back in business.Lens mechanism is not sending initialize signal to system control due to some reason and system control chip tries to open ... Digital Cameras

Canon PowerShot SX100 is : Need to download photos onto computer. Proper connection and did this before. Now, the computer doesn't recognize the connection and a small script on the camera says "Connection Error". Tried it on two different computers and tried different connector cables. Still doesn't work. Thanks for your assistance.

Here are the steps to take.1. Establish whether or not you have\015\012a connection between your camera/computer by going to your start\015\012button, control panel, system, hardware\015\012tab and device manager. The camera must be power ... Canon Digital Cameras

Down load Error message saying device is busy or not plugged in, everything is connected properly... also error when starting easyshare and program shuts down. I have removed and reinstalled program but still having same issue.

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Kodak EasyShare C340 Digital Camera

When the camera is on it's base and plugged in you can view a slide show. when it is not plugged in you can not switch it on to view anything or take any pictures but the green light still works when you try to switch on. It happened on holiday recently when a bit of sea water hit the camera lens. The camera was very hot and kept on saying battery is low. so when i got back to London i bought a new battery for it but nothing still works.

My camera got slightly wet by ocean water and will not work. It sometimes starts to turn on (once even taking a picture with no LCD screen), but mostly is dead. Could this just be a battery problem? Can a battery get ruined by a little saltwater w ... Fuji FinePix S7000 Digital Camera

I have a 10 in.pandigital photo frame Model No. P11003DW. My husband hooked it up to the computer & it is on but it says the remote is temporarily inoperative. Now, I just got the remote out & pulled the plastic thing out so it would work but it still says the remote is inoperative. And I've tried evrything to send my pictures to the photo frame & nothing works. My frame holds 2500 pictures.Pls. help

... Digital Cameras

Dropped camera I dropped my camera very lightly now the lens are stuck. Is there any way to fix this without going to a repair? I just got this one week ago and the drop was so light. THe screen works it says Access though and then it says turn the camera on  & off i did this but it still doesn't help. But the menu screen & etc works. Please help, thanks!

Check this out\015\012\015\012http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sony Cyber-shot DSC-W55 Digital Camera

Panasonic DMC-TZ1 After switching on the camera Zoom will not work. i.e. stuck at wide angle. The screen says' remove lens cap and try again' After repeating that suggestion several times it will still not work. is this a warranty problem( I still have some left) or is it something I can fix?

I just had this problem, too. I basically disassembled the camera by removing the back cover, front cover, and top assembly. The top assembly includes a plastic part between a circuit board and the top external metal piece that houses the button on t ... Panasonic Lumix DMC-TZ1 Digital Camera

The sound on my camera does not work. i have gone into settings and it says that silent mode is off but still no sound. it also says hold down the display button to deactivate silent mode and when i do this still no sound. there is now no sound in my videos that i took either.

Have you got the playback volume turned up to full in the set-up menu options? Page 89 of the pdf manual.If you have no sound 'effects' at all like shutter sound it does sound as though there may be a fault but only if you're sure silent mode is off. ... FUJIFILM FinePix Z70 Z71 Digital Camera

I have a Sony Cybershot DSC W100. I accidentally dropped it and now it says 'Access' and the lens opens and closes three times then beeps and says, 'Turn the power off and on again'. I have done this and it still doesn't work. I tried to initialize the settings - that didn't work either. I even played around with the lens some, and that didn't fix it. If you have any other suggestions please help! I would hate to have to pay $130 bucks to have it fixed.

They are trying to say that you may need to open the camera and check and clean the lens, because there's a big possibility that the lens is misaligned or worse its bad already and needs a replacement...Good luck......... ... Sony Digital Cameras

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes

I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

I have a Nikon D40X camera with two lenses - one is 18-55 and the other is 55-200. Unfortunately, when I was at a wedding rehearsal, my 55-200 lens dropped off the pew on to the ground. It was not on the camera at the time and it has not worked properly ever since. My camera works properly with the 18-55 lens. Is there anything that can be done to fix it? Essentially, the camera can still focus, in and out, but when I try and push the button down, to take a picture, it just continues to refocus

It is broken - either you wear the cost and replace it, or send it to a lens specialist and have it reset. Without seeing it, it is impossible to ascertain the condition. Most lens repairers will give you a quote for only a few dollars.\015\012 ... Nikon D40X Digital SLR Camera Digital Camera with 18-55mm Lens

Kodak Easy Share camera - I'm using ScanDisk as a device to plug my memory card into and transfer pictures. I somehow got it to work once, but Kodak Easy Share usually tells me "no device detected". My control panel tells me the device is there and working fine. I tricked it once by reinstalling and Easy Share software actually allowed me to download my pictures (last night). Today it is saying no device detected again, and nothing seems to work.

I bought a 4gb scandisk sdhc card and my camera wants to format the disk but it won't ... Digital Cameras

My computer has decided it cant recognize my digital camera anymore. I have uninstalled the driver for the camera, and reinstalled it, still the same. Also been on the camera website to find the up to date driver for camera.Downloaded this, and still the same. I have taken out the camera sd card and placed it in the processor, still not recognizing camera. What else can I do to get it to work?

Looks like you've tried most of the options, my only thoughts are, and I don't intend any insult, \015\012\015\0121) Did you swicth the camera on once connected? And have you tried more than one USB port?\015\0122) Assuming you prob ... Ricoh Caplio G4 Digital Camera

I turned the camera on and saw a black screen that moved when I did. I replaced the batteries with fresh ones no good I installed the memory full 32mb mem card and it worked, I reinstalled the 512 mb mem card and it worked until I turned it on 1 hour later again black screen that moves with you I changed mem cards still not working

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. Ple ... Canon PowerShot A95 Digital Camera

My Nikon d40x is roughly three years old and the lens has had to have been repaired twice due to it being dropped. Lens is working fine though now. Yesterday i was getting out my car and the camera fell out my bag, the lens still works fine but now the camera is refusing to take more than 1 photo and saying "card is full". Tried my brothers memory card in it and its doing the same although his memory card works fine with his camera (nikon d60). Someone help!

Time for some "tough love"...suggest you buy one of the new Pentax point-and-shoots that are especially made for people who continually drop their cameras. This one can be dropped from 3 feet and still work. Leave the good DSLRs to the rest of us. ... Nikon D40x Digital Camera

Frozen Open I work at a movie store, and was taking pictures of some movies, and had some customers, so walked away from camera, it was still on and focus out. When i returned, the camera was off, but focus was still out. it's done that many times, and all i have to do is turn it back on and it will shut close. now, today i go to do the same thing, it wont even shut on. and when it does, the screen goes blue like normal and at the bottom of the screen it says E106 is this fixable?

I hate to post without offering a solution and while checking for a possible error code list for the camera, I ran across this:\015\012\015\012 ... HP Photosmart 735 Digital Camera

Broken camera Hi I have a centrios 4.0 mega pixels camera and it was workin fine all the time I have it 1 year and the other day i tryed to ke pics and it says low battery >>Ive trey brand new battiers also bought the recharable kind and still dont work>>it comes on for a sec then says low battery and shuts off. Please help me????

Do make sure you have the correct power loading of battery.Make sure it is the correct specification as laid down in the Manual.An incorrect battery will not have enough power to run the device ... Digital Cameras

Format error my cybershot was working fine until i went to buy a new memory stick. i tried inserting it and then the screen said format error. i even tried formatting it again, even if it said everything will be erased.... but still it did not solve the problem. format error with disk. It worked fine for awhile. when disk is out it is saying that internal memory is full, but I can only view one picture.

Hmm sounds like you may have gotten corrupted..ok here is what you do..1.) connect the camera to the computer via the usb cable2.) go to My computer and you should see your camera show up as an external drive.3.) r ... Sony Cyber-Shot DSC-S500 Digital Camera

Battery compatibility battery is fully charged when it was replaced after charging the camera display says ' for use with compatible battery only' this is the original battery and has not been replaced with a sustitute.My husband has the same model camera and i have tried his battery but it still says the same thing, also i tried the battery from my camera and it works perfectly fine in his.

There's not much you can do about the problem because the problem is inside the camera. A faulty component is probably the cause. (I think its receiving more or less that the needed amount of power so that's the error with compatibility)If stil ... Sony Cyber-shot DSC-W55 Digital Camera

I have a Cannon camera Powershot A550 The camera works o.k. with the memory card furnished,but when I try a 2gb memory card the camera says "memory card error"The card is formated but the camera doesn'like it.Ive tried 3 new cards but it still wont work. Thank you for your help Larry

If the new memory card is an SD card, you should be able to use up to 2GB. MMC can support up to 1GB. You can check this link. \015\012 ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3335 seconds