Having problems with your Vivitar ViviCam 8018 Digital Camera ?

I have just purchases a 8018. It is default set at 3 mp. I have downloaded the manual and followed the instructions to change mp to 8. However, when the camera is turned off it goes back to 3. Is this normal or a fault in my camera? Do I need to remember everytime I want use it to change it from 3mp to 8mp?


Answers :

15
\015\012Image Size
\015\012The image size and quality setting determines the number of photos that can be saved and the amount of
\015\012memory required for each photo. The higher the photo quality the more memory it will use up. The image size
\015\012and quality will also affect the maximum size you can print your photo effectively. To set the Image size:
\015\0121. Press the Menu button.
\015\0122. Press Right/Left button to select the Image Size mode.
\015\012
\015\0123. Press the Up/Down button to select the desired image size.
\015\0124. Press the Menu button to confirm, save and exit to standby mode.
\015\012If this still doesn't work, press the menu button twice.
Repair Help & Product Troubleshooting for Vivitar ViviCam 8018 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have just purchases a 8018. It is default set at 3 mp. I have downloaded the manual and followed the instructions to change mp to 8. However, when the camera is turned off it goes back to 3. Is this normal or a fault in my camera? Do I need to remember everytime I want use it to change it from 3mp to 8mp?


15 \015\012Image Size \015\012The image size and quality setting determines the number of photos that can be saved and the amount of \015\012memory required for each photo. The higher the photo quality the more memory it will ... Vivitar ViviCam 8018 Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len


Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

My digital camera say lens error:21 how do i repiar the lens? sanyo vpc-e760 My SANYO VPC-S650 says lens error:507 everytime I turn the camera on. The lens has not returned back to normal position, and everytime I turn the camera it cuts back off. I hav tried replacing the batteries so the batteries are not dead


The lens has a servo fault. This can be either the lens motor, the helicoil in the lens is jamming, or the servo drive electronics has a fault. \015\012\015\012You will have to send the camera for service if you want to fix this. I doubt ... Sony Cyber-shot DSC-W55 Digital Camera

My camera is charged but for a while when i turn it on the screen is just black and my pictures do not come out. It has been doing this for a while but on and off and would usually start to work again after a while. Now it hasnt gone back to normal for a long time and i cant take any pictures. i tried taking out the battery and memory card and putting them back to refresh it but it still wont work. Its the last week of school and i need my camera to work asap !


Some times it works and sometimes not, it is due to loose contact.\015\012Try cleaning the battery terminals to remove oxidation and other coating formed due to atmoshphere, ensure memory card terminals are also well cleaned and battery is char ... Digital Cameras

I have a Nikon D70 and i am a photographer I shot a customers photos today. I shot the first half of the photos on this compact flash card and downloaded to my computer and then put it back in the camera and formatted the card. When I put the card back in I shot the rest of the photos using the same card. The last 2 photos I shot said that there was no image file and that I needed to change the card. I went to download the files to the computer but its telling me that the card needs to be format


Shoot,\015\012Is this a small capacity SD card? Like a 512mb or 1GB card?, you have to be careful not to shoot til the card is full, there's a risk of loosing data or corrupting what's on it. There are recovery utilities that can be loaded on ... Nikon D70s Digital Camera

Wrong Language My camera, ( Fujifilm E550 ), was somehow put into the language of Spanish. Im not sure how to change it back now, because of it being in Spanish. So I need to know what to do in order to change it back.


2 possible solutions for you. Take the batteries out. Press the power button (with batteries out). Nothing will happen. It's OK. Leave batteries out for 4-6 hours. Re-install batteries. Camera should default to initial set-up screen, where it will as ... Fuji FinePix E550 Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

My Fuji E500 Camera was working great until about a month ago and now it will not take photos. When I turn the camera on I can see the picture in the view screen. If I then select to take a photo the screen goes black. Then I need to swi0tch the camera off and then back on to see an image in t4he viewing screen. I have changed the batteries several times.Kind regardsPeter


Hi,the problem is not related to the batteries, your camera needs service. Turning off when the button is pressed can be set of different internal / hardware issues that we can't test over the internet.The camera will need to ... Fuji FinePix E500 Digital Camera

Is there a way to change all of the settings back to normal. I hv messed with my camera so many times I don't know what I have done? Also what is the easiest way to change it just to night mode?


Hi,For reset to default settings, you need to go into setup menu > 2nd folder ( the one with the tools icon ).Scroll down till you get to ' Reset all '. Select OK and then the Function / Set button.You could also consult yo ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Casio Exilim When I take pictures with my camera, in the viewfinder the picture comes out white. You can faintly see the picture in the back - but it's primarily white. Is there a setting that I possibly changed by accident or will I need to bring this in for repairs? My camera is only a year and a half old. Thanks


Yes you got it right. You have changed the white balance setting of your camera. Adjust it and it will be back to normal.. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Recently changed the battery and now everytime I shoot a picture the camera goes off and has to be re-powered back on to take another. Now, it won't power back on.


You need to check that you have put in the correct type of battery. Some cameras will only work with alkaline batteries.. I had this problem with my samsung when i inserted zinc batteries instead of alkaline, I use duracell cause they are pretty goo ... Samsung Digimax D53 Digital Camera

Hi when I use the creative settings I push the shutter realese button the camera clicks but does not tak the picture until I realesa the button and press it again. Is ths a setting I need to change or is it a fault in the camera . Regards Jim


No fault of the camera it's has been programed in custom function #9 for mirror lock up. In mirror kock up mode first click of the shutter button locks up the mirror the second takes the shot and lowers the mirror. Mirror lock up is most often used w ... Canon EOS Rebel XSi Digital Camera

Sigma 17-35 mm AF EX f2.8-4.0 bought for EOS 50 4years ago did not work with with new Canon 400D. Sigma claimed needed new chip. Since August is now back for third time. Noisy focussing, hunting when focussing and inaccurate focussing with both camera bodies. Also does not indicate change in maximum aperture from 17mm to 35mm or indicate lens angle in digital data. Since chip change will not now focus correctly with EOS 50 body.


... Digital Cameras

My Canon SI/IS Power Shot digital camera is not able to bring up image on normal operating picture modes. It does however still show stored pictures when I change back to images already stored in camera. In picture mode all I get is a dark screen and lines. What's up?


Definitely sounds like you have a bad CCD. The good news is, this camera is under recall for that exact issue. Canon will repair your camera OR possibly replace it with an S5IS even! Free of charge of course.From Canon website: " ... Digital Cameras

My wife has somehow changed the camera photo settings to black and white and we can't get it to change back to color. I have checked online and she has done several factory resets but that hasn't helped. It is still stuck on black and white photos. She is on a field trip with my son and we need to get it fixed ASAP., Can you help me?


Enter at MENU and select the right COLOR MODE settitng.Check in the user guide page 55: sony.com/release/DSCH9_Handbook.pdfHope ... Sony Cyber-shot DSC-H9 Digital Camera

MY COMPUTER HARD DRIVE WAS JUST REPLACED AND I CAN'T GET MY DIGITAL CAMERA TO DOWNLOAD TO MY PC. IT WAS WORKING FINE BEFORE THIS HAPPENED. EVERYTIME I TRY AND DOWNLOAD I GET THE MESSAGE THAT THE PC CAN'T CONNECT TO THE CAMERA. I HAVE CHECKED MY ELE PLUG IN THE POWER IS ON AND I HAVE CHANGED THE USB PORT SEVERAL TIMES AND NOTHING SEEMS TO WORK. I HAVE AN EBAY BUSINESS AND NEED TO DOWNLOAD MY PICTURES BAD. CAN YOU HELP ME? THANK YOU


... Digital Cameras

Everytime i connect my olympus fe 310 to the computer with a usb my camera just goes blank and doesn't show any reaction but when i remove the usb from the camera it goes back to normal. also nothing pops up on my computer once its connected either


Buy an inexpensive card reader to download your pictures to a folder you create on your desktop. ... Olympus FE-310 Digital Camera

I have a Canon Digital Rebel XT camera using a 75-300mm telephoto lens. My problem with the lens is that at times it is hard to adjust the focus either manually or automatically with the camera. I hear something rattling around inside the lens and at times the lens will not auto-focus and I have to remove the lens and manually twist it to get it back to some normal operation. Is this fixable or do I need a new lens?


It sounds like the lens has been dropped or knocked and is misaligned in the guides.Repair against new lewns is a difficult one as prices vary. I would perhaps consider replacing it with a used one. Before you do borrow a similar lens from some ... Canon Digital Cameras

CAMERA WILL TAKE TWO PICTURES THEN GIVE ME A BLUE SCREEN SAYING PROCESSING WITH AN HOUR GLASS WHICH TAKES A WHILE BUT IF I HIT SHUTTER BUTTON AGAIN IT GOES BACK TO NORMAL, IT IS JUST IRRITATING. IT IS NOT GIVING ME LOW BATTERY ICON (THAT WAS REPLACED ABOUT 4 MONTHS AGO BUT I HAVE NOT USED MY CAMERA BUT TWICE SINCE THEN. I DESPRATLY NEED TO KNOW WHAT IS GOING ON & HOW TO FIX THIS ISSUE A.S.A.P. I GO INTO THE HOSPITAL TO HAVE MY SON TOMORROW AND WOULD LIKE TO MAKE PICTURES. PLEASE HELP


... Kodak EasyShare ZD710 Digital Camera

The switch on the back of the camera will not allow me to change between picture mode and viewing mode. The slide is free moving, does not let me choose which option I want. Can I take this slider off and manually pick the option I need? Or is this a send away and let someone else fix job?


The plastic switch has ether broken or the tab has it could be a easy fix by just removing the case and realigning the case but if your not comfortable removing the case then yeah it would have to go to a service center. I h ... Digital Cameras

On my DMC-TZ5 the flash doesn't work anymore. Everytime a pic needs the flash, the icon starts to blink red continuosly and if I do not change the flash option to "force disabled", the camera ask to be turned off and on again after 10 sec... Any suggestion?


... Panasonic DMC-TZ4 Digital Camera

I need to change the iso setting on my camera but cannot remember how to do it fuji s602zoom


ISO can be changed in P, S. A and M mode only.\015\012You cannot change the ISO in AUTO or SP mode.\015\012Press Menu/OK and use < and > to select ISO. Use\015\012up and down arrow to change the ISO. Press OK ... Fuji FinePix S602 Zoom Digital Camera

Button-be-dead Ok, so this might sound kind of stupid but my camera was in my purse and I didn't drop it or anything, but when I went to take it out to take pictures, the button you push to take the picture was already half down so it won't stop auto-focusing. I can't zoom in or out, look through my pictures, turn the flash off, delete pictures, or change picture styles. I know it's because of the button already being down halfway but I really need to know how to fix it and get the button back


Thanks for posting this article as I had no idea of the cause and was suspecting a firmware/software fault.\015\012\015\012I had the same problem a few days ago. As my camera was out of warranty and the advice from a salesperson in a well known chain ... Canon PowerShot A75 Digital Camera

I lost Canon Rebel XTi instruction book. I don't remember how to change settings on camera-like ISO, aperture, shutter speed, etc. I am just learning so I need to figure out how to print a manual or view on online.


Hi,Please download all necessary User Manuals from Canon Support f ... Canon Digital Cameras

Nikon D200 I can't seem to import pictures on to my pc. I shoot in RAW. I have Picture Project loaded which came with the camera. I also have Adobe Elements which normally imports my pictures. It wont read the compact flash card in this instant but if I go through my computer, and look at the D200 picture file, I can see all the thumb nails. Can't remember how you are meant to import with just Nikon provided software!! Help! In a rush, about to go on trip to Africa and need to make sure I load


All procedures on how to pictures is in the user mnual about Picture Project loaded.\015\012Just click below to download D200 user manual pdf files.\015\012\015\012 ... Nikon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5633 seconds