Having problems with your Vivitar ViviCam 8018 Digital Camera ?

Settings change everytime i power on/off

\015 Why is it that everythime i turn the power off the settings change back to factory settings, i dont want it to be at 3 mega pixels everytime i turn it on, is there anyway i can save the settings so it stays the same when i turn it on/off\015

Answers :

The user manual can be down loaded for free from here:-


Page 16 refers to picture resolution, apparently once you've chosen the resolution you require you have to

"3. Press the Up/Down button to select the desired image size.
4. Press the Menu button to confirm, save and exit to standby mode".

Repair Help & Product Troubleshooting for Vivitar ViviCam 8018 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Settings change everytime i power on/off

The user manual can be down loaded for free from here:-http://www.vivitar.com/products#Digital%20Cameras/24/12/SupportPage 16 refers to picture resolution, apparently once you've chosen the resolution you require you have to ... Vivitar ViviCam 8018 Digital Camera

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea

I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

Shutter speed I have a cannon a410 power shot. when i take pictures it takes about 10 seconds for me to be able to take another picture. this problem just started recently. I must have changed a setting and I am not sure what setting it is to change it back. can you please help me change the setting back so I can take pictures faster. thanks

If there is a factory reset option it the settings try pressing that. Remember to back up anything on the camera (eg. photos). ... Canon PowerShot A410 Digital Camera

KODAK LS753: when the camera is powered up the screen comes on to set date and time. The selector five way switch can move between set and cancel. When the switch is pressed straight in nothing happens. I was thinking there may be a hard reset somewhere on the camera to clear this glitch. Cycling the power does not change anything.

... Kodak EasyShare LS753 Digital Camera

How do I change the default setting on my sony DSC-T90 digital camera,so that the default language of japanese changes to english? the camera buy it to japan. Everytime i go to language setting, i dont see any english to transfer it! is there any solution to it? thanks

Here is the user manual for your camera. Please read it you will the language settingshttp://www.docs.sony.com/release/DSCT20_EN_ES.pdf ... Digital Cameras

I think I'm going to explode if I hear one more "worn out battery" explanation for what seems to be a pretty common complaint. This is my 3rd camera...all ending up with the same problem. I've had the Canon Power Shot A570 for less than a year. Someone suggested changing the settings...but even with brand spanking new batteries, I can't even get it to last long enough to get into the settings. There is clearly a problem here that has NOTHING to do with the blasted batteries.

Sounds like you have a faulty board in the camera or it could be something as simple as a software upgrade, I know some of the Fuji Hine Pix had the same problem and it was the software. Take it back to the Canon. ... Canon PowerShot A520 Digital Camera

Blurry Pictures When we first bought this camera it worked perfectly almost everytime. However lately, there are so many blurry pictures, even when I'm taking still object and with tripod. We have set the Stabilizer to Mode 2 , is there any other setting that we have to change ?

I had the same problem with blurry pictures, and unable to focus. then i discvered i had accidentally switched to manual focus. I switched back to auto, and no more blur. ... Panasonic Lumix DMC-FZ20 Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.

... Olympus Stylus 770 SW Digital Camera

The view finder or screen are black. The lens moves out when the camera is powered on, I can hear the shutter click when pushed; the telephoto is moving; I have all the settings show on the screen when the camera is powered on but I cannot see anything through the view finder or on the screen and no image is captured when a pic is taken. I changed the batteries and it made no difference.

I know it may sound like the shutter is moving, but you're going to have to actually look down the lens barrel to confirm it's actually moving, and not just producing a sound effect from the camera. Also keep in mind Canon's SX IS series cameras are ... Canon PowerShot S3 IS Digital Camera

Focus is out and the lens should close when powered off but doesn't I changed the batteries to lithium was i to change the settings?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Samsung Digimax L830 Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f

Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Power Over the last few weeks I have had issues with the batteries. I found that the "Eveready" brand certainly doesnt work (I am currently in India and it is hard to find anything here!) and I just went through 3 sets of Duracells but after a short period of time it tells me to change the batteries. I just changed them with new Duracells but when I turn the camera on it wont let me get past that initial little birdy which is the start up screen. I also just noticed that my zoom lens thinger is

Get Rechargable batteries with charger of good company and try it. Your problem is discharged/ outdated batteries. ... Canon PowerShot A510 Digital Camera

Battery Problem My 18-month-old Canon A70 is giving "change the battery pack" message and turning off constantly, even though I have fully charged three different sets of new rechargeable batteries and rotate them as soon as the message comes on. Sometimes with this message I pull out one charged set and put the same back in, and it works fine for quite awhile, then repeats later. I imagine this is a problem in the camera battery power circuit or something. Never happens when plugged into the co

I figured out the problem. My AA battery recharger was not making good contact, so although it said the batteries were recharged, this was not the case. After fixing this and getting full recharges, the problem went away. ... Canon PowerShot A70 Digital Camera

I have the Bushnell Trail Sentry 11-9302 game camera, 2.1 MP. I went in and entered the password, changed all the settings then powered it down. Turned it back on and now my password doesn't work? How do I reset the cameras password to the default password so I can get back into the setting so I can use the camera?

... Bushnell Digital Cameras

My canon powershot s45 works fine , until i plug it into my computer. then it wont even power up . its not my ports or cords i checked them. i dont have the manual & i think that a setting was changed or something . what settings do i need it on to transfer my pics to my comp?

When connected to the PC the cameras display will blank out, this is normal. If the cameras "Communication" setting is set to "Normal" you can only download images when the cameras drivers have been installed of the bundled CD. If you change it to "P ... Canon PowerShot S45 Digital Camera


Mine does the same, but it is the CF card door switch that is the problem. The door is a little loose, slightest touch/movement ... Sony Cyber-Shot DSC-F828 Digital Camera

Okay, I'm not sure if my camera got wet or what but it has a white screen with lines through it when you try to turn it on and it won't change no matter what setting it's set to. Also, everytime you try to turn it on, the lens opens and closes frantically. Is there any way this can be fixed?

... Panasonic Lumix DMC-TZ50 Digital Camera

I have just purchases a 8018. It is default set at 3 mp. I have downloaded the manual and followed the instructions to change mp to 8. However, when the camera is turned off it goes back to 3. Is this normal or a fault in my camera? Do I need to remember everytime I want use it to change it from 3mp to 8mp?

15 \015\012Image Size \015\012The image size and quality setting determines the number of photos that can be saved and the amount of \015\012memory required for each photo. The higher the photo quality the more memory it will ... Vivitar ViviCam 8018 Digital Camera

I have a Canon Power Shot SD1000 Digital ELPH 7.1 Mega Pixels. For some reaons my pics are not downloading. The pictures show on the screeen, but the EOS Utility does not automatically come on the screen. I go to the EOS Program and open, but still nothing is happening. I have uninstalled and reinstalled but this has not made a change. I am in my 50's and not good at this! The camera is awesome and has always worked extremely well. Any ideas? Could something in the camera settings have changed.

The Best solution wud be to buy a card reader writer and transfer the pics using that ... ... Canon PowerShot SD1000 Digital Camera

Recently changed the battery and now everytime I shoot a picture the camera goes off and has to be re-powered back on to take another. Now, it won't power back on.

You need to check that you have put in the correct type of battery. Some cameras will only work with alkaline batteries.. I had this problem with my samsung when i inserted zinc batteries instead of alkaline, I use duracell cause they are pretty goo ... Samsung Digimax D53 Digital Camera

Write Protect I own an olympus Camedia D-390 and use an xd picture card (16mb) recently I tried to take a picture but when I slid back the cover it comes up with the error message "Write Protect" I have looked in the manual and all it says it that my cameras write protect feature has been enabled by a pc; connect it to a pc and turn this off. Just one problem....How??? I have trid connecting it tothe pc and changing the attributes of the folders;but everytime I take off the "read only setting

What should i do? would u mine pls to teach me sir? ... Olympus Camedia D-390 Digital Camera

Everytime I take a picture with the flash on my canon SD1000 Elph there is a small amount of smoke that comes out by the flash. Also, suddenly I can't seem to change my iso settings. The camera is only 2 years old and no drops. Any ideas?

You have a short circuit in your camera...it can produce a flame. Be careful. ... Canon PowerShot SD1000 Digital Camera

I just bought a Nikon D40. The monitor shuts off after being on for only 5 secs. I Have tried changing out the battery with a fully charged one and the problem persists. Is there a way to set the duration of the monitor being on? Is there some sort of power saver option? Thanx Skip B

Yes , it is a power saver. I remember there being a way to change it in the menus. Note: the "monitor" stays on for different times depending on mode. There is a manual on line. I had better luck just playing with the menus. The menu your looking for ... Nikon D40 Digital Camera with 18-135mm lens

When I try to zoom with my sony cybershot 7.2 it zooms from 1.0 to 1.1 then says turn power off and on again. My son changed a setting and I can't seem to figure it out.

Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Sony Cyber-shot DSC-W70 Digital Camera

I dropped it. It powers up & zoom goes in & out. The set date/time display wont change or go away. is there a way to reboot camera other than removing battery?? Thanks

... Fuji FinePix F470 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1485 seconds