Having problems with your Vivitar ViviCam 8025 Digital Camera ?

When i try to turn on my flash, it says 'macro mode' what does this mean, and how can i get my flash working again?


Answers :

Do you have a button with a picture of a flower on it? Press that to remove macro mode...then your flash may work.
Theres a little switch next to the usb part . Just switch it up and the flash should turn on\012\012ad9b212d-0c97-4d26-ae6e-6696e9b0e8ba1.03.01
Repair Help & Product Troubleshooting for Vivitar ViviCam 8025 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i try to turn on my flash, it says 'macro mode' what does this mean, and how can i get my flash working again?


Do you have a button with a picture of a flower on it? Press that to remove macro mode...then your flash may work. ... Vivitar ViviCam 8025 Digital Camera

I have a vivitar X014 and when I want to turn on flash the screen says no flash in macro mode. How do I get out of macro mode?


There's a slide switch on the end of the camera. Slide it away from the flower and toward the mountain. ... Vivitar X014 Digital Camera

Cant get the flash to turn on. camera says no flash in macro mode.


Flash is really disabled when a camera is n macro mode. its disabled because since you are going to take pictures of small objects tendencies are your subject will be over exposed if flash is applied. so dont worry because its normal. ... Vivitar Vivicam T027 Digital Camera

When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera

The CD that came with the camera will not load onto my computer. I need an instruction manual. I did figure out how to take, delete, ect. but for some reason the flash will not turn on and I get a message on the screen that says "macro mode".


The flash will not fire in macro mode because macro mode allows you to get close to your subject. Get out of macro mode by pressing a button with a picture of a flower on it or by it. ... Vivitar ViviCam 8025 Digital Camera

I'm having issues getting my sony cybershot dsc-f828 to work. I can turn it on and review the pics on the card IF it's already in review mode. if not, the light blinks above the flash icon and either the screen stays black or it says "access". it won't take pics.


The problem is most likely with the micro switch in the Compact Flash door. Try using a Memory Stick and the problem will not likely appear. ... Sony Cyber-Shot DSC-F828 Digital Camera

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre


Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

My problem is with the vivicam 3188 camera. I cant get the flash to come on. The manual only says it will noy come on if the batteries are needing to be replaced. Well my problem is I bought this camera on line and recieved it about 5 hrs ago and it came with name brand ones. The flash did work earlier. The camera has the flash off icon on. But by the manual the button I need to press to turn the flash on doesnt turn it on. Please help


Remove the batteries from your camera and the press the power button for few seconds say 20 sec , then release it.. put the batteries back to ur cam n try... tis is how u reset ur camera.... try tis ... Vivitar Digital Cameras

"Charging Flash" This is the second R817 I've had with the exact same problem. The battery is fully charged, but the flash won't work--it says "charging flash", but nothing happens. I have to turn the flash off to get it to take any picture. The fools at HP say too bad, so sad, replace it.....


I just posted the same problem a few minutes ago and now i have the solution!! got to this link http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=437509&lang=endownload the driver if nee ... HP Photosmart R817 Digital Camera

When I try to turn my flash on it says macro mode, What is this and how do I fix it?


Macro mode is for taking pictures of subjects very close to the camera. In this mode the flash is disabled.Without knowing the model of your Digital Concepts camera I can't tell you how to take it out of macro mode. If there's a button on the ... Digital Concepts Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I can't get my camera to flash or work in the "Auto" mode. I've cleared all of the images, reset the settings and use custom settings. I place the camera on "Auto" and turn it on. It goes into the delay mode for 59 seconds and then goes to sleep. It won't take a picture or flash.


... Moultrie GameSpy 4.0 Digital Camera Deluxe

Hi there, im having a problem turning on my camera. I press th on/off button and the len comes out but suddenly the led below the "M" button flashes red and gets turn off, but if I press "viewing pictures" button, the camera works ok showing all the pictures and says that the baterry is full. I already cleaned the contacts, from the batteries and from the camera, and it still doesnt work. What could it be?


When u prefer normal camera function,camera will shut off,becaz in camera mode, the flash unit gets charged,since the flashunit is defective,the camera gets off.So, change the flash unit . ... Polaroid i531 Digital Camera

Saying no flash in Macro mode. How do I get out of Macro Mode Modle vivcam 7024


There's a slide switch on the end of the camera, near the USB socket. Slide it from the flower to the mountain. ... Vivitar ViviCam 7024 Digital Camera

I have a sony cybershot DSC-T70 when I try to use the flash it doesn't work. When I touch the screen 4 options are supposed to come up and nothing appears except for the one that says no flash. I was thinking maybe it was in auto mode but how do you take that off because I was recently in vegas and I couldn't get the darn thing to work and in most of the pictures you can barely see the people I was taking a picture of


The flash icon will also be disabled if the camera is in burst or continous shooting mode-if possible restore camera to factory defaults and start from there-check in home menu under shooting and see what the settings are ... Digital Cameras

How do i get my vivitarvivicamx024 to turn off macro mode? i cant get the flash to turn on.


There's a slide switch on the end of the camera, near the SD card slot. Slide it away from the flower symbol toward the mountain symbol to take it out of macro mode. ... Vivitar ViviCam 8025 Digital Camera

I have a cyber shot DSC-S80 which has been working fine for ages. However I deleted some photos from the memory stick whilst it was in my computer and now I get the 'memory stick error' message flashing everytime I turn the camera on with it in. It works fine in the computer still. Is there a way round this problem? Tried checking for errors with the windows system of my laptop and says there are not any.


Try to format memory stick with the camera's facilities. Maybe the camera doesn't recognize the stick.\012\012\012You can try another memory stick to know exactly what it happened. ... Sony Cyber-Shot DSC-S80 Digital Camera

Whenever i want to turn the flash on, i press the flash icon and it says "macro mode" on the screen.


You can't use the flash in macro mode. Macro mode is for taking pictures of objects close to the camera.\012\012\012To switch out of macro mode, slide the switch on the left of the camera, just above the USB port, away from the flower ico ... Vivitar ViviCam 8025 Digital Camera

What does E:91:01 mean? I get the error message when I turn my camera on and the flash will NOT work. Please help. Thanks,


E:91 is the purticullar flash failer error itmeans you may chang flash unit please go to your nearst sony service centre & fix your problum ... Sony Cyber-shot DSC-W50 Digital Camera

When i try to turn my flash on it says Macro Mode


You're in macro mode and the flash won't function. Check your manual to find out how to get out of macro mode. Most cameras have a button or a dial with a picture of a flower representing macro mode. Find that and change it. ... Vivitar ViviCam 8025 Digital Camera

My macro mode says its on and i dont know how to take if off to get back my flash


There is a switch on the left side of the camera (as viewed from the rear) near the USB slot. Select the flower icon for macro, the mountain icon for normal. ... Vivitar ViviCam 8025 Digital Camera

When I turn on the power button, the orange light flshes on ,then goes off and the green light flashes. Then there is a message on the screen that says zoom error. Then all goes off., How do I get the camera working?


Base from the description of your problem the lens no longer extended or retract that;s why you're receiving this zoom error and this is a issue with the lens mechanism of the camera.We can try this turned on the camera while holding in t ... Olympus SP-320 Digital Camera

I can't turn on my flash because it says macro mode on


Press the button with the picture of a flower to get out of macro mode. ... Vivitar ViviCam 8025 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3741 seconds