Having problems with your Vivitar ViviCam 8025 Digital Camera ?

The CD that came with the camera will not load onto my computer. I need an instruction manual. I did figure out how to take, delete, ect. but for some reason the flash will not turn on and I get a message on the screen that says "macro mode".


Answers :

The flash will not fire in macro mode because macro mode allows you to get close to your subject. Get out of macro mode by pressing a button with a picture of a flower on it or by it.
Repair Help & Product Troubleshooting for Vivitar ViviCam 8025 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The CD that came with the camera will not load onto my computer. I need an instruction manual. I did figure out how to take, delete, ect. but for some reason the flash will not turn on and I get a message on the screen that says "macro mode".


The flash will not fire in macro mode because macro mode allows you to get close to your subject. Get out of macro mode by pressing a button with a picture of a flower on it or by it. ... Vivitar ViviCam 8025 Digital Camera

I have a vivitar X014 and when I want to turn on flash the screen says no flash in macro mode. How do I get out of macro mode?


There's a slide switch on the end of the camera. Slide it away from the flower and toward the mountain. ... Vivitar X014 Digital Camera

When I try to turn my flash on it says macro mode, What is this and how do I fix it?


Macro mode is for taking pictures of subjects very close to the camera. In this mode the flash is disabled.Without knowing the model of your Digital Concepts camera I can't tell you how to take it out of macro mode. If there's a button on the ... Digital Concepts Digital Camera

My Lumix DMC-FX8 shows me the message turn off then turn back on again for some reason my flash stopped working completly. and randomly it tell me to "please turn off, then turn back on" i tried everything. HELP I'm having a similar problem with my Lumix DMC-FX01. Movie taking won't work either. I don't if the camera might have gotten some moisture in it or what. Any suggestions?


I had this problem on the weekend! I fixed it with a more archaic method. When it says turn the camera off and then on again, the lens is stuck out. It only goes back in when I turned the camera off and then on for a brief second, and then pops out a ... Panasonic Lumix DMC-FX01 Digital Camera

How to turn flash on when macro mode is on?


There's a slide switch on the end of the camera, near the USB socket. Slide it away from the flower toward the mountain. ... Vivitar ViviCam 8025 Digital Camera

Whenever i want to turn the flash on, i press the flash icon and it says "macro mode" on the screen.


You can't use the flash in macro mode. Macro mode is for taking pictures of objects close to the camera.\012\012\012To switch out of macro mode, slide the switch on the left of the camera, just above the USB port, away from the flower ico ... Vivitar ViviCam 8025 Digital Camera

How do i get my vivitarvivicamx024 to turn off macro mode? i cant get the flash to turn on.


There's a slide switch on the end of the camera, near the SD card slot. Slide it away from the flower symbol toward the mountain symbol to take it out of macro mode. ... Vivitar ViviCam 8025 Digital Camera

Cant get the flash to turn on. camera says no flash in macro mode.


Flash is really disabled when a camera is n macro mode. its disabled because since you are going to take pictures of small objects tendencies are your subject will be over exposed if flash is applied. so dont worry because its normal. ... Vivitar Vivicam T027 Digital Camera

When i try to turn on my flash, it says 'macro mode' what does this mean, and how can i get my flash working again?


Do you have a button with a picture of a flower on it? Press that to remove macro mode...then your flash may work. ... Vivitar ViviCam 8025 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

I try to turn the flash on and it says Macro Mode. HELP????


The macro mode is for taking pictures of subjects very close to the camera. In this mode the flash is disabled.There's a slide switch on the side of the camera, near the USB socket. Slide it away from the flower and toward the mountain to take th ... Vivitar ViviCam 8025 Digital Camera

I can't turn on my flash because it says macro mode on


Press the button with the picture of a flower to get out of macro mode. ... Vivitar ViviCam 8025 Digital Camera

I don't know how to turn off my macro mode. Or use flash for video.


Well, you didn't tell us what kind of camera you have so this answer is kind of generic. Macro mode is controlled with a button that has a flower icon on it. Video cannot use flash...think about it! ... Digital Cameras

My Sony Cybershot DSCW520 keeps saying turn off and on again and flashing a message called macro...tried taking back to factory settings but no difference. Works okay when looking at old pictures can only access menu then too. How can I fix this


... Sony Cyber-shot DSC-W55 Digital Camera

When i try to turn my flash on it says Macro Mode


You're in macro mode and the flash won't function. Check your manual to find out how to get out of macro mode. Most cameras have a button or a dial with a picture of a flower representing macro mode. Find that and change it. ... Vivitar ViviCam 8025 Digital Camera

Zoom Error Apparently alot of these camera's run into this problem. When I switch it on and turn it to Photo or video mode it flashes a "Zoom Error" message and I am unable to take photo's. I was wondering if there is anyway to fix this? Please help. Thanks, James


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix A345 Digital Camera

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre


Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

I am unable to suppress flash on my Fujifilm s9100 in any mode that supports flash. Even with the flash down it still fires except in Landscape scene mode and Super Macro mode. I do not know where the switch for the flash is located and will likely send it into Fuji for repair, but wanted to check to see if anyone has experienced this problem before I do so.


... Fuji FinePix S9100 Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Nikon D40 pictures taken but too dark even in AUTO mode with flash on a bright day. also, some days ago I had the Shutter release error message while taking some photos. After that, the camera is acting weird, pictures sometimes are taken but the picture is always dark, although flash is used and AUTO mode selected. I do not see the error message anymore, but the camera simply do not take pictures properly. I tried formatting, etc with no result.


Make sure flash is on your flash on cam is sticking. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

Lens stays open, "turn..off and on again" message. print/play mode closes lens but problem & message return in picture modes. Holding "W" had no effect either


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FX10 Digital Camera

"For" Message I was infrequently getting a "for" message, which stopped me from taking pics. I bought a new card and all was well for a while. However, it started again. I removed and reinserted the card and this seemed to work. Now, the "for" message is constantly there. The green light flashes on for a moment when I insert the card, then goes off. If I turn the camera on, the "for" message flashes on and off.


Of course the camera is telling you to format the card... you know that, right, but you don't want to because (a) it is already correctly formatted and (b) this warning happens when you are half way thru shooting.\015\012Try another card that you kno ... Nikon D70s Digital Camera

My flash won't turn on for my iSonic digital video camera. The instructions say to press the "up" arrow on the camera in the capture mode. I do this, I hear a beep, the tint of the screen changes, but it doesn't flash in any mode. I either see a "no flash" symbol, or nothing, and either way it still doesn't flash.


... iSonic Snapbox DC-520 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2698 seconds