Having problems with your Vivitar ViviCam 8025 Digital Camera ?

How do i turn on my vivitar 8025 , its fullly charged but when turned on it shuts back off in about a second ?

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Vivitar ViviCam 8025 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i turn on my vivitar 8025 , its fullly charged but when turned on it shuts back off in about a second ?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Vivitar ViviCam 8025 Digital Camera

My camera was working perfect and then i turned it on to look at pictures and it turned on for a split second and then shut off, my lens is stuck out now and it wont turn back on, i even bought another battery to see if that would help and both batteries are fully charged the green light comes on and NOTHING happens. HELP!!!! I am going on vacation in a month and i need a camera!

Hi,I am Sorry to hear regarding the Problem.This is a ' Lens \015\012Problem ' which is Quite Common on \015\012these Models.It is not worth to get it Repaired, as the Cost of \015\012repair would be quite high as compared to ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

My Kodak V1233, isn't working right. If I turn it on, it will only turn on a second and extend the lense and then shuts off (it's fully charged). I can eventually get to take pictures, if I start by hitting the favorite button, and then the camcorder button and then quickly hitting the the camera button. I can take pictures, but can't see them, I only see a black screen. The camera will not power off this way. If I take the battery out, and then put it back in, and hit the favorite button,

I have had the exact same problem this seems to be a common flaw in this model i do not suggest any one purchase the V1233 ... Kodak EasyShare V1233 Digital Camera

The battery is fully charged, when I turn the camera on the lense will come out lights on the camera come on for a second then everything goes off,lense goes back in.If I take the battery out for a minute then put it back in it lets me set the date then shuts off.

Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: r ... Digital Cameras

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len

Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

When I turn on my Kodak Z740 camera it only stays on for about 3 seconds then it shuts off completely. When I turn it on, the lens moves out then back in, then shuts off. The battery is one I bought fairly recently, I tried taking it out, leaving it out for seversl hours and putting it back in, this did not help.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare Z740 Digital Camera

Sony Cyber-shot DSC-H2 turns on sporadically. Once on it works fine. Shut it off and try to turn back on and it doesn't. Repeated pushing of the power button maybe 30-40 times and it turns back on again. Once you get it on it Works fine. Turn off and when you want to turn it on again must push power button over and over to get it on again. This happens with brand new batteries and with rechargeable batteries that have been fully charged. Any assistance would be appreciated. Doug Clark

Hi,It seems power button is not working properly and needs little force to send command to camera.Please press PLAY button on camera (it is located nearby power button) and check, does camera turn On in playback status instantly or giving ... Sony Cyber-shot DSC-S700 Digital Camera

Batteries are fully charged. I can turn my camera on and look through my pictures, go through all the menus, etc., but as soon as I hit the button to take a picture, the camera just shuts off. I can immediately turn the camera back on, but it makes a strange clicking sound before it turns on. My lens is stuck out because even if I turn the camera on and turn it right back off manually, the lens does not retract. The camera was purchased in winter of '08 and I've had no problems whatsoever with i

Possible that the shutter or the focus mechanism is faulty and will need to be opened. Only if you are competent must you attempt to remove the camera as the mechansim and circuit will be delicate which needs experience. Ohter wise the best option is ... Digital Cameras

I turn on my camera and it turns on for a second and then turns right back off....battery is fully charged and everything. I have taken the battery out and put it back in and still nothing.

May their is a problem in the bord of the camra how ever frst try by changing another battry with high voltage ... Sanyo VPC-T1060 Digital Camera

I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat

It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera

The battery is completely charged, but when i go to turn on the camera, it turns on for a split secong then shuts off. The lense is stuck out fully and won't go back in because the camera turns off so fast. Seems to be the battery, but it is completely charged.

If the battery is old it might need replaced even though it says its fukky charged! ... Digital Cameras

I hadn't charged my w330 Sony camera for a while ....I've only had my camera for 6 months...and it's warranty is 2 yrs. The camera is in good condition, yet when I charged my battery, and later put it in the camera, I turned on the screen and a few seconds later, it said for compatible battery use only....later i took my battery out and held the power switch button for like 30 seconds and then put my battery back in. My camera still didn't work, but i don't want to go to special services because

In order to avoid people using 3rd party batteries, electronics manufacturers have started putting smart chips in the battery packs. The camera interrogates the smart chip and if it isn't the Sony chip, the camera tells you "too bad."In ... Digital Cameras

Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?

My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras

Sometimes when i turn it on it shuts itself off. so i turn it on again and it will stay on for a second and shut off again. it doesnt do it all the time just sometimes. and yes i have a charged battery

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Sanyo Xacti VPC-T700 Digital Camera

My vivitar camera 8025 won't turn back on. I tried charging it and the red light is on, but it won't turn back on.

... Vivitar ViviCam 8025 Digital Camera

Help The last time I used my camera a maybe a week or two ago, it shut off because the batteries died and the lens never pushed back in. So, I just now went to turn it on after putting in new duracell batteries in, which I have used all different kinds in my camera, I have it sent so that the Samsung icon is on as it starts up. So that came on and after a second you can see on the LCD screen but it is blurry and after a few seconds I hear 3 loud annoying beeps and then it shuts off. What could b

The 3 beeping sound as ou call it annoying means that the camera has low battery capacity. the lens is stuck out because there is incorrect battery connection. there is an option on the camera setting for the battery type. try this one:\015\012 ... Samsung Digimax S630 Digital Camera

Lens error The lens on my Sanyo VPC-E760 will not close. I was not dropped, I was using it to take a picture and turned it off, but the lens never retracted. Now when I turn it back on, it is stuck in zoom mode and give an lens error message when I try to zoom back out, then it shuts itself off. Battery is fully charged. Any suggestions?

Hey jennbrady24,\015\012 What is most likely causing the lens error is that something is obstructing the movement of the lens (i.e. sand). I would first try removing the batteries and the memory card and waiting at le ... Digital Cameras

Only about 9 months after buying my camera, It wouldn't turn on. I'll plug it in and the light will come on that it's charging, but when I got to turn it on, it turns on for a split second (and the zoom lense comes out) and then it turns itself right back off (and the zoom lense goes in). I thought that it needed a new battery so I bought one and it's still doing the same thing. I emailed Kodak and they said that I should just send it into them for a $60 repair fee...lame. Any suggestions?

If its only been 9 months since you bought it shouldn't it be covered for repair? espically if its a manufactures fault,which it sounds like. ... Kodak EasyShare M863 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

I have a FinePix Z1 I have installed a new battery and it is fully charged. The problem is that the camera shuts down within 20 seconds. I slide the front and it restarts only to shut down again. I have reset the camera via the menu and every time I try to go to the menu the camera shuts down. I have just taken 22 pictures went to the menu to turn off the lcd saver and the camera shut ndown Please help

I had very similar problem. There is a small sensor flap near the hinge in the battery compartment which tells the camera if the battery door is closed or not. If it wont work properly it gives signal "battery door open" and camera will shut down, mi ... Fuji FinePix Z1 Digital Camera

Samsung digimax s1000 turned on before, lens came out then shut off.power light blinks when you try to turn it on. but will not turn back on. lights up only when button pressed. tried different batteries. Using N-Mi Rechargeable batteries. Tried with sd card Worked fine the day before. But, it looks like the lens did not come all the way out and the first lens is at an angle to the second. Gears stuck maybe? Don't remember interfering with the lens when it was turned on. If it's the gears being

Follow this link and i would try step 8 and/or step 9http://www.wikihow.com/Repair-Lens-Problems-on-Your-Digital-CameraI am a ... Samsung Digimax S1000 Digital Camera

Cybershot will not power up it has been charged and i tried removing the sd card and battery then reinstalling them and still no power. It tried to turn on but shut down. Its giving the error messag too Turn off and turn back on!!! and when it does nothing.

... Sony Cyber-shot DSC-W170 Digital Camera

Camera won't save pictures error message when turned on: !!! Bad data access address!! Bad Address = 0 X 00000028 PC = 0 X 00675e30 Reason: 15 sp = 0 X 00f1178c Domain: 11 and other numbers and then shuts down. Error message lasts around 5 seconds.

... HP Photosmart R725 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3222 seconds