Having problems with your Vivitar ViviCam X327 Digital Camera ?

The disk is out of date for camer x327 i cannot start it up

Answers :

You can download the Vivitar software here. Click on the "Vivitar Experience Software" link.
You don't need the Vivitar software to use your camera. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.
Repair Help & Product Troubleshooting for Vivitar ViviCam X327 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The disk is out of date for camer x327 i cannot start it up

You can download the Vivitar software here. Click on the "Vivitar Experience Software" link.You don't need the Vivitar software to use ... Vivitar ViviCam X327 Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?

Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

Canon sd800is, 3 years old. Cannot get the computor and camer to each other. Blue light is not on. I had windows xp when I bought the camera and was able to transfere with no problem. As of this year have windows Vista. Cannot remember if I had attempted a transfere. I reinstalled the operations disk that comes with the camera. No drop box, nothing. Could it be that Vista, which has lots of quirks, is not compatible? Is there a download to fix it? Had to do that with my printer. pamann1

Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras

My PC is not recognizing my camera, so i cannot download my pictures. It used to work fine for 2 years. In the Device Manager it gives me the following message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). My software is up to date. Help!?!

Windows updates has changed the registry and now your camera is no longer recognized. No problem....just get a card reader and use it instead of your camera for downloads. ... Canon PowerShot A570 IS Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c

Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

I would like to get a full manual for my new SX20 IS. I cannot get it from the disk. I only have the start up manual

You can download the user guide and more from the manufacturer's web site at\012\012\012http://www.usa.canon.com/cusa/consumer/products/cameras/digital_cameras/powershot_sx20_is#BrochuresAndManuals ... Digital Cameras

I cannot start my minolta f200, it has been working ok to date. I have checked the batteries

... Konica Minolta DiMAGE F200 Digital Camera

I have an error code on my Sony Handycam SDR-12 HDD. The code is E31:00. The manual says I cannot fix the problem. Do you know what the problem might be? It started as a format disk error. I reformatted the Hard Drive. The camera recorded fine, but the error code is still flashing.

... Digital Cameras

How do I set the time and date on my 6800 camers. I have lost my instruction book. It did come up for a start but I don't know how to bring it back. Thanks

This is found in the "setup" menu. ... Fuji FinePix 6800 Zoom Digital Camera

Having trouble getting the camers started can;t get the date time setplease help

Please provide the complete make and model of your camera. ... Digital Cameras

I have a 2005 Grand Cherokee that uses a Navigation (Navteq on Board disk) It tells me that it cannot read disk, disk error or please insert disk. I have tried cleaning the disk, does not work. Because there is an error, I cannot get to any of the other functions, such as changing the time on the clock. What do I need to do, buy another disk? Trade vehicles?

... Digital Cameras

I have a new computer. I cannot find the installation disk for my kodak c743 camera. I cannot retrieve the photos that I downloaded to the new computer to email or list my items on my ebay site. They are on my computer, but I cannot upload them to the places I just spoke of. What can I do? Buy a new disk? Or will I be able to get this software from the internet Kodak site?

If you are looking for KODAK EASYSHARE Software Version: 7.0.1 download it free. ... Kodak Digital Cameras

Hi, I have a Pentax Optio WPI and using ACDC viewer. After upgrading on my computer at home it now says that the memory disk is not formatted and I cannot view pictures on my computer. I try to format the disk and it tries and then says it cannot. I put the card in a reader and it will not work either. The camera, disk and reader all work on my computer at work. I contacted Pentax and they said it was not a problem with the camera. Any thoughts on how to fix this on my home computer? Please hel

It is quite possible that your home system does have a virus in the system causing a registry issue. If possible use a good anti virus as the one at your work place and doa scan to trace out any malwares in the PC. You can also down load a registry c ... Pentax Optio S5i Digital Camera

Daate Stamp We recently lost our Canon A95 camera and replaced it with a Canon A640. We cannot get the "Date Stamp" to work on the menu. We see it listed last on the menu. However the lettering is black (not white like the others) and we cannot get on it to turn "Date Stamp" on. You Camera User Guide is useless. Please advise how to turn the Date Stamp feature on. Franklin L. Finley at [email protected]

Some functions are not available in all modes.\015\012\015\012You have to select Postcard mode to be able to enable the feature (about Page 35). Postcard ratio is 3:2.\015\012If any other ratio is selected (e.g. 3:4) then if it were ... Canon PowerShot A640 Digital Camera

Hi, i have the conon 7D with a sandisk memory card. i am a photographer and i just did christmas pictures today for a family. when i got home i tried to put them onto my computer and the computer told me to reformat my disk because it cannot read it. when i clicked reformat, it said that all my pictures would be deleted if i reformatted it. i cannot loose these pictures for anything! im sure you understand. when i put the disk back into my 7d it says to reformat it too. then it shuts off. could

It sounds as if your SD card has failed. It may be physically (electrically) damaged. Do NOT put the card in your camera any more, as it could make things much worse.You may be able to use a disk recovery program to get some or (hopefully) all ... Canon Digital Cameras

KODAK C613 I CANNOT download my easyshare disk onto my computer.it stops 1/2 way and window pops up saying error 1638x17x4102304322x cannot continue as if something is missing--when i plug in camera to puter via usb cable,then nothing happens--i installed easyshare disk ok on daughters puter--(windows xp on both ) and all works well on hers.

Something happened to my software, it says i need to repair , but the repair will not work, says i need to go online to fix the problems. Where ... Kodak EasyShare C613 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.

To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

December 31/09. I moved from the MST zone to the PST zone. On the atomic clock I moved the button to change the zone. The clock seemed to work as it should for about 10 days. It is now late December and suddenly the date changed to the new year about December 26. December 30, I decided to change the batteries. The date changed to Tues Jan 1, with the time completely out of whack. Temperature seems accurate but I cannot figure out how to change the date and time. It has date and time butto

You can get the manual on link below. You need model # though.\015\012\015\012\015\012http://www.skyscan.info/content/manuals.html ... Sharp Digital Cameras

I have a 256MB SD memory card (SanDisk). The case has split and my camera and my computer cannot read the card. Is there anything I can do? My Samsung L201 Camera and other cameras cannot read the my SanDisk Memory Card (256 MB). It all started when the memory card went full and I changed it and used a 2 GB SanDisk instead. When I put it in my camera again, the card cannot be read. It asked if I wanted to format it but my files would be deleted. I put it in my laptop and the laptop cannot rea

Try to check your memory card with at least 5 different computers. if they have card readers much better. memory cards have to be given at least 8MB for processing. It may have been used up even the space for processing. If haven't save the files ... Samsung L200 Digital Camera

My Pentax Optio M4 suddenly started to shut down and power off after starting up. It starts up normally, then gives 3 short beeps, then shuts down as if I had just switched it off. I have recharged the battery but the problem still remains. I cannot reset the camera to factory defaults as it doesn't stay on long enough for me to access the memu options.

... Pentax Optio M40 Digital Camera

How do you remove the date from the picture, but still have the camera associate the date in your computer? When I set the date, it started showing up on all my pictures and I do not want it there.

Press the Menu button. Press cursor-up/down to select "Date Stamp" (rubber stamp icon) and press OK. Use cursor-up/down to highlight an option and press OK. Press Menu to exit the menu. ... Kodak EasyShare DX4530 Digital Camera

This photo can't be displayed. You might not have enough memory available. Close some programs or, if you hard disk is almost full, free some disk space and try again. ----This message comes out on certain photos that I cannot open when I transfer the photos from the dslar (nikon d90). But I checked and I have enough disk space. Some photos are able to be viewed without problems.

... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

I could not get my floppy disk out and the paper sticky that describes what is on the disk got stuck. I had to get it out with a tweezer. The spring load would not push it out. NOW, I cannot put my floppy disk back in. It stops at a certain point and I do not want to push it. I have a Sony MVCFD81 and I love this camera. I need it fixed. How much and how long does it take? Thank you, Sharon A. Miller

On my Sony MVC-FD88 I had listed this as a similar problem on FixYa.com\015\012and then explored it further. I'm very technical so I replaced the\015\012internal floppy disk drive myself, so wanted to post my findings here.\015\012\015\0 ... Digital Cameras

I have a Canon Sure Shot 115u II Date 35mm Film Camera. No manual. How do I fix the blinking icons on the LED screen? There are a series of dashes along the top of the screen. They look like a place for the date, as in 03 03 10. Tried to get them to stop blinking by pressing the "DATE" button. It made a noise, and then another icon started blinking as well. This is the one that looks like a roll of film looking down at it from the top. The camera had just been loaded with fresh film and n

Remove the battary and the film,the clean the contcts of the bat and bat comparment, and put the battary then operate camera without film.finding it normally operating for 10-20 clicks,put the film and try ... Canon Sure Shot 115u II Date 35mm Film Camera

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp

There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1080 seconds