Having problems with your Digital Cameras ?
When I take pictures my pictures come out fuzzy and I reset the camera back to the factory settings.
😍52% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/en/65-crystalography.html Add another dimension to your photography with the CrystaloGraphy Pro ✅ Makes the PERFECT gift! The CrystaloGraphy works with 📷 : all cameras 📱: all smartphones. ➡ sellerscity.net/en/65-crystalography.htmlPosted by SellersCity on Saturday, April 28, 2018
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
When I take pictures my pictures come out fuzzy and I reset the camera back to the factory settings.
... Digital Cameras
I have a Nikon CoolPix 4300 that is about 5 years old. I mostly use it in the Macro mode for close-up photos of the sewing thimbles I sell on eBay. The last two times I've used the camera, I can take only a few pictures (2 or 3) before the camera shuts itself off. It will come back on by itself, after a while, but I have to totally reset it to take only a few pictures, then it shuts off again. I have set the auto shut off to 30 minutes, but that didn't help. I have tried several different batter
The capacitor in the circuit board is getting weak not holding the circuit open. That is why it is shutting down. The cost to repair it outweighs the cost of a new camera ... Nikon Coolpix 4300 Digital Camera
Settings Is there a way to set my camera back to the original settings. My kids were playing around with it and now when I go to take a picture it is all fuzzy and distorted. I have tried in the menu but wonder if there is a reset button to do this. Thanks for the help
First check to make sure the kids fingerprints are not all over the lens. If the lens is clean, then your kids are probably not at fault. This really sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, incl ... Canon PowerShot A300 Digital Camera
Battery? I just purchased the camera last night. Installed the included batteries, took a few pictures. When I put the camera into auto macro mode, set the resolution to super fine and try taking a picture, the camera shuts off and will not come back on. The lens is still extended from the camera. The same thing happend last night, without the super fine resolution. I took out the batteries and put them back in and the camera functioned normally. But today it will not come back on. A
I just got mine today, and the batteries were dead withtin a couple of hours, so yes.\015\012\015\012mines has decided to go black, it was fun while it lasted,, theres \302\24390 ill never see again ... Samsung Digimax S500 Digital Camera
When I take a picture with the flash the picture actually turns out so dark you can not view it. Is there a hard reset to set the camera back to factory default
Google it to find out. Also check Canon's website to find out if there is a firmware flash/update for you camera. Usually those reprogram updates fixes most most problems. Good luck. ... Canon PowerShot A640 Digital Camera
I used to be able to take 1000+ pictures on external memory card. Now I'm trying to take pictures and it will only allow me to take 9 pictures but on the camera memory. I have reset the camera to factory settings and also purchased and inserted a new external memory card and I cant to taking pictures via the external memory card. Do you have any suggestions??
With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert your card and do the format thing again (This will erase your card so if there are pictures on it, download ... Olympus SP-565 UZ Digital Camera
Fuzzy pictures My camera does not take clear pictures, no matter what I do. All the pictures are fuzzy and not sharp. Is there a tip you can recommend or a way I can reset the camera to original settings. Even if the camera is on auto focus, auto flash, and normal mode...they are still fuzzy. help!!! Amanda
Go back to film. Digital SUCKS. ... Casio Exilim EX-Z50 Digital Camera
I have a new (3 weeks) D700 and while taking photos yesterday with camera and a 16-35mm lens, the exposure meter went ape. Pictures taken ok but ERR started to flash where shutter speed reading should be displayed in viewfinder. Tried everything, including resetting to factory settings, detaching and reattaching lens, checking switches, and then went home in despair. At home I switched to a 50mm lens and the problem disappeared. I put the 16-35mm lens back and problem seemed to have disappeared.
... Nikon Digital Cameras
Yashica ez digital 6032- 6 mp camera.. i got one sparingly used yashica camera... with above spec... which shows trouble when taking stil pictures outdoors... indoor pictures and video indoors n outdoors are fine. but when taking stills outdoor mainly in daylight condtions... resulting pic is over exposed and blured...with white light...i tried adjsting the setting and i have reseted to factory settings... but the same problem remains...pls help me
Yashica ez digital 6032video indoors n outdoors are fine.but when taking stills outdoor mainly in daylight condtions...resulting pic is over exposed and blured...with white light...i triedadjst ... Digital Cameras
Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.
This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera
I'm not sure what is relevant and what isn't but... Two days ago I tried taking a picture on my timer and all of them came out blurry. I wasn't sure why this was so I started poking around on the camera and decided to reset all factory settings. Then that evening I tried to upload my pictures to my computer as usual. The software (Picasa) locked up. I tried taking the camera out of the cradle and turning it on but it wouldn't turn on. I rebooted my computer and tried turing the camera on
Sometimes a camera software upgrade will help, but it is hard to find software online. I first would look on manufacture's website to see if there is any driver updates you can download to your pc, then do the same with picasa software. Also make sur ... Digital Cameras
My polariod t1035 camera has fully charged battery, reset to factory settings, and reformatted memory. but when i turn on the camera, the screen is just black, no picture, except when i look at the pictures on the camera. i have taken a picture, and it comes out just black. please help.
Unfortunately this faulty cant yoou fix it alone...why this is a ccd crash the ccd is faulty...you must change the ccd or the entire lens block... you must now see if you have convenience to adjust the camera, why it s possible that the fixing cost ... Polaroid i1035 Digital Camera
Every picture i take is blurry. I've tried changing all the settings and going back to factory settings but nothing works. I've also tried all the different camera modes in all the proper times and none work properly. I took 25 pics at party with the party setting and night portrait and candle light setting and they all truned out extremely blurry. i dont know what to do except send it back
... Panasonic Lumix DMC-ZS3 Digital Camera
I turn the camera on, the Canon image comes up along with various icons, but there is no picture in the viewer - and when I take a picture I get nothing. It's like the lens remains covered. Is this a setting that is somehow changed? I reset - but no change. I can view pictures on the card, so it's not the display. I can also view settings - just not any picture.
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera
Taking pictures toward a light or bright object, picture comes out with fuzzy lines through pictures. If under non bright light it takes normal pictures. I've reset the setting and still the same problem. Any recommendation on how to fix it or is it time for a new one?
... Sony Cyber-shot DSC-S700 Digital Camera
Casio Exilim When I take pictures with my camera, in the viewfinder the picture comes out white. You can faintly see the picture in the back - but it's primarily white. Is there a setting that I possibly changed by accident or will I need to bring this in for repairs? My camera is only a year and a half old. Thanks
Yes you got it right. You have changed the white balance setting of your camera. Adjust it and it will be back to normal.. ... Casio EXILIM ZOOM EX-Z60 Digital Camera
I can take digital photos that are on the sd card but I am not able to get my pc to download or reconise the Canon Powershot. I can not download photos! It used to go into download mode as soon as I plugged the camera inot the pc by using the digital port on back of camera and usb port on pc. What can I do. I have reset the camera setting back to factory with no success. I have Windows xp.
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S1 IS Digital Camera
I am trying to get my camera back to the factory settings but everytime i go menucardset then go tocustom reset setting it jumps over it and goes straight to picture mode. I cannot get it to highlight custom reset setting.
There may be another "reset" in the menu that will do what you want. Search for it. ... Olympus EVOLT E-500 Digital Camera
Very time I try to take a picture my camera goes back and forth from the different settings. when it does take a picture the pictures turn out really fuzzy
Take it out of auto mode will help. ... Samsung Digimax S730 Digital Camera
I have a powershot A560 it takes a long time for camera to come back to a place where you can take another picture. I cant find a place on the camera where I can reset the timer.
I use an A550 and an A570, and when the batteries are getting low, they slow down between pics. Also, if the flash is used, IT has to recycle between uses, and THAT takes time. On MY cameras, I press the "function" button, and look for DRIVE mode t ... Canon PowerShot A560 Digital Camera
Write Protect I own an olympus Camedia D-390 and use an xd picture card (16mb) recently I tried to take a picture but when I slid back the cover it comes up with the error message "Write Protect" I have looked in the manual and all it says it that my cameras write protect feature has been enabled by a pc; connect it to a pc and turn this off. Just one problem....How??? I have trid connecting it tothe pc and changing the attributes of the folders;but everytime I take off the "read only setting
What should i do? would u mine pls to teach me sir? ... Olympus Camedia D-390 Digital Camera
Negative effect. I've had my Canon Powershot S3 1S for over a year now. The other day I was taking pictures and it was working fine. I turn it off and set it down. I come back later, turn it on again and the screen shows has white lines that keep flicking over it. I turn it off and take the batteries out. Later I put the batteries back in, turn it on, and find that it is in negative effect. I'm pretty sure that my camera can't do this naturally and I've tried everything to see if I could get it
Have you tried resetting it to factory settings. if no please do it.(refer manual)but if yes please contact us again ... Canon PowerShot S3 IS Digital Camera
I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.
Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera
The lens on my samsung camera model L830 is blurry and when I take the picture it comes out blurry also...I had set my camera (while it was on) by my phone on the counter and turn around to turn it off and the screen made square black and white blocks. I immeditely turned the camera off and then turned it back on and tht's when it was all blurry. I hope that this was not a magnized issue since it was next to my cell phone. Thanks for any help.
... Digital Cameras
My Camera will turn on but the display is black. I took a picture to see if the light in the display was messed up but it is taking black pictures. My husband messed with the display settings and it worked for a little while and it went black again and will not come back.
Reset your gadget to factory defaults........ If the problem is due to wrong settings then it will solve it. And If not, then their could be a mechanical problem so, get it serviced................ ... Samsung BL103 Digital Camera