Having problems with your Digital Cameras ?
Re Panasonic Lumix TZ5
After taking 2 or 3 pictures I get message saying please turn off camera then turn on again
Sounds Lens has some issue and system control senses it and issue turn off and on again message.
Preform RESET camera, take out battery from camera for few minutes, put back battery in camera and turn it ON and check.
Preform RESET camera, take out battery from camera for few minutes, put back battery in camera and turn it ON and check.
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message
OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras
Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.
Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera
When I turn on my Lumix DMC-FS3 Camera the lens tries to go out but it does it half way, then it goes in and the action is repeated about three times. Then there is a message on the display that says "Please turn off your camera and then turn it on again". I do that and the process repeats. Thank you.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS3 Digital Camera
I have a panasonic lumix DMC-TZ3 camera and it's not working. When I turn it on, the lenses comes out/goes in like 3 times but it won't focus and stay open. I can't take a picture. A message says to turn it off and turn it back on again, but it doesn't work. I can view my album in the the camera....please help!
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-TZ3 Digital Camera
Our camera was dropped. It currently turns on and the lens telescopes out, back in and then out again. Once it does that is sends a message that says "Please turn camera off and then on again". Is there some type of "reset" button? It is a Panasonic Lumix DMC-LZ7
You have a lens problem. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE most ... Panasonic Lumix DMC-LZ7 Digital Camera
It currently turns on and the lens telescopes out, back in and then out and the in again. Once it does that is sends a message that says "Please turn camera off and then on again". Is there some type of "reset" button? It is a Panasonic Lumix DMC-LZ7
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-LZ7 Digital Camera
My Panasonic Lumix DMC-TZ2 camera has a blurred display within 25 seconds of being turned on when in any mode other than playback. When the display blurs, it quite quickly becomes unviewable, and if I try to take a photo, an error message saying WRITE ERROR PLEASE CHECK THE CARD shows on the screen. The card seems fine and pictures I took before today all look good, both on the display and in a computer. Is there any fix, or do I need a new camera?
This is a problem with the camera lens and yes this can still be fix but you need to have it check on a service center but that price will not be cheap so if I may suggest it will be better to get a new camera..... ... Panasonic Lumix DMC-TZ2 Digital Camera
Re Panasonic Lumix TZ5 After taking 2 or 3 pictures I get message saying please turn off camera then turn on again
Sounds Lens has some issue and system control senses it and issue turn off and on again message.Preform RESET camera, take out battery from camera for few minutes, put back battery in camera and turn it ON and check.Thanks. ... Digital Cameras
I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st
Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera
About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera
When ever I try to use the zoom button I get a message saying system error (zoom) I have also gotten a message that says Please turn off camera and turn on again... What is going on with my camera and what needs to happen to get it fixed!
When you first switch on the camera the lens will motor forward?\015\012\015\012If it does so then either the zoom control button is faulty or the control pcb \015\012\015\012If the lens does not move on first switch on then i ... Panasonic Lumix DMC-FZ28 Digital Camera
Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?
Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera
HELP ME my Lumix DMC-FX8 lens wont go back into the camera and will only allow me to preview my pictures ...Please I am in Hawaii right now and the lens is stuck out and wont go in and it says Turn off and turn on camera again ....PLEASE Please someone help me
I read the previous answer, as I have exactly the same problem. So I decided the camera was dead. Having done this I resetted it via the menu - settings - reset. Then I turned it off and smashed it really hard against a flat surface three or four tim ... Panasonic Lumix DMC-FX8 Digital Camera
I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera
The lens will not retract when it's off. When I turn the camera on, the lens retracts and extends again. Then there is a message - Please turn camera off and then on again.. In that moment before the message shows up, I've tries to take a poicture, but it I can't - the camera doesn't respond to the button being pushed. model Lumix dmc-fx07.
Hi,I Hope the steps below should be helpful in fixing your camera issue. ... Panasonic Lumix DMC-FX7 Digital Camera
Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara
Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera
Lumix DMC-F3 When I turn the camera on, the display screen says "PLEASE TURN CAMERA OFF AND THEN ON AGAIN" when you do it, it says it again???
There is a problem with your camera Lens Assembly. It is not opening within stipulated time. The lens assy is jammed or damaged. Take it to service center. ... Panasonic Lumix DMC-LZ2 Digital Camera
When in a record mode LCD says to "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures but cannot take pictures. Any ideas what might be causing this message to appear?
You are experiencing a media miscommunication. This due to low or incorrect amount of voltage to the cameras coding circuits.Take a Q-Tip "dampened" with rubbing alcohol and clean inside the battery compartment well. Do the battery contacts and the c ... Panasonic Lumix DMC-FX500 Digital Camera
With our panasonic DMC-LZ5, first we got a message saying replace batteries, which we did (with new ones). Now, the screen is all white with a message saying please turn camera off and then on again. We've tried several sets of batteries, and turned it off and on again. The picture of the battery is all in white, with a line through the middle. Any ideas on how to reset?
Http://www.fixya.com/support/t1100571-lumix_dmc_lz5_replace_battery ... Panasonic Digital Cameras
LUMIX DMC-LS80 SHOWING MESSAGE PLEASE TURN OFF CAMERA AND TURN ON
This fault is usually caused by a lens problem.Over 95 percent of lens problems are from Knock damaged or sand/grit in mechanism. It will need to be serviced by an experienced technician. ... Panasonic Lumix DMC-TZ1 Digital Camera
Lumix dmc-zs3 When camera turns on, I get an error message "Please turn camera off and then on again" . When camera is turned off, the lens doesnt retract.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-LZ2 Digital Camera
I dropped my panasonic camera onto the zoom lens. the zoom will not close, the shutter stays open. When I turn on the camera it says "please turn off camera and turn on again." When I do this the same message comes on again. Is it worth geting fixed?
... Digital Cameras
Lumix FX9: Display says,"please turn camera off and then on again
Hard to say, this is very rare on a camera, but if a Reset back to factory settings does not work, im afraid it will have to be replaced. ... Panasonic Lumix DMC-FX9 Digital Camera
Nikon d80 dslr camera working fine and then one day turned it on to take pictures only to find an err message flashing and when the shutter button depressed it says r04. The shutter sounds but no pictures are taken. Is this a problem inside the camera that will have to be fixed by a professional? Also tried charging the battery and charger says the full charge is complete but when put into the camera it does not show a complete charge in the battery info. Please help don't want to send my camera
HiI am sorry to hear, but you will have to some professional. Regarding your d80 has common problem of sequence unit defective. I believe that is the problem and your local repair shop would charge around $75 to 235 depend on what they really want ... Nikon D80 Digital Camera
My Lumix DMC-FX8 shows me the message turn off then turn back on again for some reason my flash stopped working completly. and randomly it tell me to "please turn off, then turn back on" i tried everything. HELP I'm having a similar problem with my Lumix DMC-FX01. Movie taking won't work either. I don't if the camera might have gotten some moisture in it or what. Any suggestions?
I had this problem on the weekend! I fixed it with a more archaic method. When it says turn the camera off and then on again, the lens is stuck out. It only goes back in when I turned the camera off and then on for a brief second, and then pops out a ... Panasonic Lumix DMC-FX01 Digital Camera