Having problems with your Digital Cameras ?
I dropped my camera and now my lens will not close and i try turning it on and it says lens error and shuts back off.
😍52% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/en/65-crystalography.html Add another dimension to your photography with the CrystaloGraphy Pro ✅ Makes the PERFECT gift! The CrystaloGraphy works with 📷 : all cameras 📱: all smartphones. ➡ sellerscity.net/en/65-crystalography.htmlPosted by SellersCity on Saturday, April 28, 2018
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a cannon camera, my boyfriend dropped it with the lens extended and now whenever I try to turn it on I get a message saying that there is a lens error and the camera will shut down. I have tried a couple of answers on this website, but most have to do with a lens that is stuck out, mine will still retract back and forth if you smack it on your hand. My problem is when you power it off and back on the error shows up and the lens will not extend then. Any suggestions are greatly appreciate
... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera
Lens error my camera keeps saying lens error and then shuts off My Kodak M753 digital camera is telling me "lens error: 1,1,5,1,0,0", how can I fix this? - I have no proof of when I bought it, so a refund is out of the question. my camera was covered by luggage and now when i turn it on, it says lens error I dropped my digital camera just recently back in October and all of a sudden when I turn the camera off the lens is still out when it's suppose to be in... I really don't know how that hap
This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Fuji FinePix A345 Digital Camera
My digital camera say lens error:21 how do i repiar the lens? sanyo vpc-e760 My SANYO VPC-S650 says lens error:507 everytime I turn the camera on. The lens has not returned back to normal position, and everytime I turn the camera it cuts back off. I hav tried replacing the batteries so the batteries are not dead
The lens has a servo fault. This can be either the lens motor, the helicoil in the lens is jamming, or the servo drive electronics has a fault. \015\012\015\012You will have to send the camera for service if you want to fix this. I doubt ... Sony Cyber-shot DSC-W55 Digital Camera
Help!!! i dropped my Nikong Coolpix L11 camera on the pavement. The lens got dented in, so naturally i popped it back to its normal place i turned it on and it worked for about 30 seconds and then popped but with the image that said "Lens Error". So i turned it off then turned it back on and it did the same thing. It did that for about 10 minutes and now as soon as i turned it on it says "Lens Error". I cant figure out how to fix it, i've tried slightly tapping it against my desk, i've tried hol
Hellothere are tiny plastic gears inside and may have chipped or a small piece of sand got in causing the lens to jamb. "very fragile"one solution is to ask a camera repair shop how much a lens mechanism would be to replace. ( ... Nikon Coolpix L11 Digital Camera
I had my camera taking a video with and I dropped it, It automatically turned off but the lens didn't go back in. Now whenever I try to turn it on it says lens error and shuts off
The camera will need to be sent in for repair. Because of the age, you would be better served if you bought a new camera. For under $ 250 you can get the SD780IS which is smaller in size, has more pixels resolution and Image Stabization and many ad ... Canon PowerShot SD750 / IXUS 75 Digital Camera
I dropped my camera on the floor while i was taking a picture , the camera shut off , but the lens stayed popped out . i tried to turn the camera on again , but i would only show me the home screen , which says "Kodak Easy Share System , Share" then the camera freexes up , and it say in the top left corner , "lens error : 22" i've tried smacking it against things , i've tried smacking it on my hands , i've tried pulling out the lens , NOTHING WORKS. Please Please Please Please Please Please Plea
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak EasyShare CD33 Digital Camera
I dropped my camera and now my lens will not close and i try turning it on and it says lens error and shuts back off.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras
Zoom error Today after using my camera for awhile the back screen displayed "zoom error" and a little sound whirled. Then the camera shut off by itself. I turned it on and off a couple of times, but without success. The lens is extended and will not withdraw back into the camera. I have taken out the batteries and re-inserted them. Finally, I gently pushed the lenses back to the body of the camera (as they seemed to be trying to go back to the camera), I am still getting the zoom error reading a
You may be true that sand must be creating this problem, as this happens very often. the sand enters into the lense assembly, creating friction in the movement. if this has happened total dismantelling and cleaning of the lense assembly will solve t ... Olympus Camedia C-350 Digital Camera
I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras
Lens Error My cameras battery was low but I kept taking pictures until the camera shut off by itself. The lens didn't retract all the way and now when I try to turn my camera on it makes a clicking noise like the lens wants to move but it doesn't and on the back screen it states a lens error. I am not sure how to resolve this problem I have charged the battery and taken it out. I unfortunately do not have the manual on me.
I have exactly the same problem with my camera, except there is no error message - just the screen is off (bat is full). i cant find a soultion anywhere in the manual or online. Any help on this would be much appreciated. ... Casio Exilim EX-S500 Digital Camera
My nikon coolpix camera says lens error and beeps when i turn it on and then goes back in and shuts off.. What can i try to do to fix before shipping it off to nikon?
Here's a web blog about what you can try to do to fix the problem. They say about half the cameras can be fixed by trying their suggestions. Here it is:\015\012 ... Nikon Coolpix S4000 Digital Camera
I bought my camera Christmas Eve, and a new memory card Christmas Day. Yesterday, I tried turning the camera on and the lens opened and shut automatically and said Lens Error with a Large Red Exclamation point. I've come to the conclusion that it was because I hadn't formatted the new memory card with the camera and I'd already taken a few pictures with it. But now, when I turn the camera on, it no longer says that and only has a blurry image and does not take photos. I do not know how to fix th
... Nikon Coolpix S4000 Digital Camera
Vivitar 5386 turning the camera on, i get a "lens error" sign, and then the lens will go back in (after being 1/4 of an inch out) and the camera will shut itself off, how do i fix the lens?? ive tried air into the lens, and different batteries, and i tried opening the caemra up, but i couldnt get off the last screw, so i dont know what to do
I suggest that you take your camera to a profesional camera shop, like Jessops, and see what they say. if they cannot fix it then just buy a new camera. ... Vivitar ViviCam 4345 Digital Camera
My daughter was using the camera and she said the lens was stuck in the extended position so she pushed the lens back in ... Now when I try to turn it on an error comes up saying 'lens error restart camera
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot SX100 IS Digital Camera
Neither the fujifilm 256MB xd card nor th enew Olympus 2GB xd card will work in the A340. I've put the card in and went to Format it in the camera as per teh menu. It acts like it does but when you take a picture it says "write error" When you turn it on again it still says "card not initialized." I've tried formating them with the camera on (lens cover open) and using the menu and with the camera off (lens cover closed powered on using the button on the back) and using the menu from that screen
The camera needs to be up-dated to read the cards it may still have the old dater in it! so it cant "see" the biger cards ... Fuji FinePix A340 Digital Camera
I have only had my Canon PowerShot SD1400 IS Digital camera since December and all of a sudden whenever I try to turn it on, the lens does not open or move out and I receive an error message saying "Lens Error, Will shut down automatically, Restart camera." I have never dropped this camera and am concerned that it is not fixable. Please help!
It always comes because there is something loose inside the lens, such as a screw.\015\012These articles maybe helpful for you: ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
I have a Cannon Powershot SD600, just got it recently and it worked great, then all of a sudden I noticed the cover lens's that slide over to protect the lens when you shut it off were messed up. Onle 1 was showing. I tried turning it on, and all it says now is, "Lens error, please restart camera." I tried the Hold Menu down for 5 seconds, but that did nothing since it doesn't even turn on.
The Canon series are fine camera's, but they seem to suffer from lens errors (check how many people suffered from this by googling lens error canon). The problem seems to come from sand/dust entering the body and jamming the lens gear. A h ... Canon PowerShot SD600 Digital Camera
Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera
\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc" uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras
Lens Error Whenever I try to turn on my Cannon Powershot SD1000 digital camera the screen says ''lens error, restart camera'' but then it shuts off. What should i do?
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD1000 Digital Camera
Error 2111 on camera VPC-S750 when i try to zoom in it says lens error 2111 and shuts off. the lens does not close when i turn my camera off.
This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Sanyo Xacti VPC-S60 Digital Camera
Zoom Error? Whenever I turn my camera on it says "Zoom error". It won't let me zoom. The image is incredibly blurry. And even when I turn the camera off the lens doesn't shut all the way. I tried resetting it, but it had no effect.
Dirt in the focus motor drive gears right behind the lens at the front.\015\012It's a **** design (my opinion). The lens at the front moves in and out depending on your zoom level. It can come right out of the lens barrell at the front. So, if ... Fuji FinePix A500 Digital Camera
Hello Everyone! I'm in Tokyo and when taking pictures this afternoon, and when I tried to turn off the camera the Lens didn't retract (I'm sorry if this is not the appropriate term it is not written in English, and English is not my mother tongue). And when I try to turn it back on, It says "Lens Error" in red. Can anyone please help me with this?? Such a bad time for this to happen....
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Nikon COOLPIX S710 Digital Camera
Lens error my canon IXUS 860 IS is having a lens error problem. firstly, the lens cant retract back and when i try to switch it on, the screen will say 'lens error, restart camera' so how do i restart the camera?? i'm currently overseas and although my camera is within warranty, i cant possibly send my camera back to the original country for repair. is there any DIY method?? i'm an amateur at cameras so i do not wish to try any method that may further make the problem worse. thank you for your h
This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon IXUS V2 Digital Camera
Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.
I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera