Having problems with your Canon PowerShot A75 Digital Camera ?
My lens will not open on my Canon PowerShot A720 Camera will not open. It say, "lens errror, restart your camera." How do I do this? I tried to change the batteries. This did not work.
😍52% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/en/65-crystalography.html Add another dimension to your photography with the CrystaloGraphy Pro ✅ Makes the PERFECT gift! The CrystaloGraphy works with 📷 : all cameras 📱: all smartphones. ➡ sellerscity.net/en/65-crystalography.htmlPosted by SellersCity on Saturday, April 28, 2018
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a 3 year old Sony DCR-DVD202E Camcorder which has worked perfectly up until yesterday, when the lens cover refused to open. Other thsn this the camera powers up normally and the LCD screen shows a white dot where light is entering through the cover I have tried changing the battery, switching the camera on and off many times, powering it from the AC adaptor and, at the suggestion of Sony, resetting the camera. None of this has worked. It is possible to open the cover manually, so it is
Happened to me before. NO Problem!!! The mechanical lens cover is "powered" by a small spring. When a little bit of dust/dirt/sand gets into the track it slides in, i gets stuck. CAREFULLY open the lens cover (maybe with the help of a toothpick) and ... Digital Cameras
When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!
The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera
My lens will not open on my Canon PowerShot A720 Camera will not open. It say, "lens errror, restart your camera." How do I do this? I tried to change the batteries. This did not work.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A75 Digital Camera
I dropped my camera. In the off position, the lens stays open and projected. Then turning to the on position the lens goes in, then out again. Then I receive the message "Please turn camera off and then on again." Before receiving this message, the screen looks normal, as if it will work, but then the message comes up. I took the battery out to try to reset, but no change. Any suggestioins?
HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will need to ... Panasonic Lumix DMC-FX8 Digital Camera
When I turn on my Nikon coolpix S210, it gives me a lens error prompt. I have read posts on another website and it said everything from hold the lens out by force to turn the lens slightly clockwise while it is out to rap it slightly a few times, to changing battery to taking the camera apart. Short of taking the camera apart, I have tried them all. Nothing works. I just put alot of money into the camera buying extra picture cards, batteries, etc. NOW IT WON'T WORK! And there doesn't s
Your only other option is to take the camera apart. Sending it in would cost as much or more then a new camera. Really you don't have much to lose because right now the camera is broken. I will link you to one helpful site that has a write up tearing ... Nikon Coolpix S210 Digital Camera
Battery Problem I bought a Nikon Coolpix L12 Digital Camera this past summer and have had no problem until last night. My camera turned off and said "battery exhausted." After changing the batteries twice with new batteries, the lens would open for a second then close and the camera turned off once again saying "battery exhausted." I don't know what happened. I had same problem. No matter how many times I have changed batteries, It works for a second then closes with signal saying "warning batt
These cameras have a internal battery that holds data for the camera to keep its settings. These batteries can be replaced but the camera has to be disassimboled to change it they should be able to be changed at a local camera shop pretty cheap. ... Nikon COOLPIX L12 Digital Camera
Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.
Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras
When i try to turn my camera on it says "lens error, restart camera" but when i try to restart the camera it just repeats the error message. Ive plugged the camera into the computer, I've tried taking out the battery and memory card nothing changes. the lens will not extend or open"
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD1100 IS Digital Camera
Camera won't turn on when trying to take pictures but works fine to view pictures already taken. Lens is stuck open. Changed batteries several times.
Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fix ... Sony Cyber-shot DSC-S600 Digital Camera
I have Canon power shot S2 IS digital camera.I bought it around 2 years back.Now my camera is showing the sign of "change the batteries" even though the batteries are fully charged and the lens does not come out..When I tried the same batteries on other digicamera they are working fine. Very few times the camera starts working but after taking 2 or 3 pics the low battery sign appears on the screen.I use AA size NiMH Sony batteries. Can you let me know the solution to my issue.
I suggest replacing a fresh battery will most likely solve your prob, overtime rechargeable battery can drain easily, try changing with a new battery and see if it does work well, there might be insufficient current, thats why it tends to drop of vol ... Canon PowerShot A540 Digital Camera
My FE-360 keeps shutting down with the lens stuck out. When you try and turn it on you can hear the lens trying to retract but it stays stuck out and the camera makes a bleeping sound. I have noticed that if i open and close the battery cover whilst it is making this bleeping noise, the screen comes to life. All of the menus can be accessed and options changed but the picture seen on screen is very poor quality and the camera will not take a picture. As soon as you press the capture image butt
Your camera has a lens error, this\015\012 is such a common fault that I hop ... Olympus FE-360 Digital Camera
Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this
For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera
My camera got stuck, it lens its open, its stretch like it was on, but it is accually off, i tried batteries and it does not work, i tried connecting it to the pc and it dosnt work, i tried them both at the same time and its still dosnt work, please help me
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Sony Cyber-shot DSC-S700 Digital Camera
Sony DSC-S500 My camera is 10 months old. It's been working perfectly up until today. When I turn it on the lens closes. When I turn it off the lens opens. When I can get the lens to open half way as soon as I push the zoom button it closes. It's kind of like the lens is stuck. I've tried replacing batteries, I wasn't sure what else to do.
You are right it has defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes ... Sony Cyber-Shot DSC-S40 Digital Camera
Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res
Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera
Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt
... Canon Digital Cameras
The battery is fully charged. The camera comes on for about 15-20 seconds and then the message comes on the screen:Please turn camera off and then on again.' when shutting down, the lens remains out. I have taken the battery in and out several times- no change. Not dropped or wet- no reason , it just started not working. Tried checking on the driver to do update available on the website, but it shuts down. Any hope for it? Love the camera!!! until now :-(
HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Panasonic DMC-TZ5 Digital Camera
We went to a water theme park and my camera fell into the water (immersed completely). After that I tried to turn it on to check it works or not but it was showing some problems. Then I opened the battery and left it for a day like around 24 hours. Now when I try to turn on the camera. It says Lens Error. What could be done in this situation. Camera Model : Canon IXUS 80IS. Need some assistance in this regard.
Turning on a camera with water inside is risky. You can fry the circuits. I'm amazed yours worked although for how long is anyone's guess. It should have been buried in a bowl of dry rice for a week. Even so, water will have seeped between the lens e ... Canon Digital Cameras
Cyberpix s-555v my mercury cyberpix S-555V camera worked well for a couple of weeks, but once when i tried to attached it to my computer it stopped working. ever since every time i try to turn it on, the red light turns on for a few seconds indicating busy, but then it goes off, and nothing happens. neither the lens opens nor does it repond to any kind of gentle pats. i've tried new batteries too, but all in vain.. what do i do?
Sounds like a problem with the usb cord and you need to write the company and they are really good about sending out another one,same thing happened to me too. ... Mercury Electronics CyberPix S-550V Digital Camera
Cyperpix s-555v my mercury cyberpix S-555V camera worked well for a couple of weeks, but once when i tried to attached it to my computer it stopped working. ever since every time i try to turn it on, the red light turns on for a few seconds indicating busy, but then it goes off, and nothing happens. neither the lens opens nor does it repond to any kind of gentle pats. i've tried new batteries too, but all in vain.. what do i do?
Dear,If your camera is in warranty period then please visit the nearest service station.Regards,Rakesh KumarNetwork Support Engineer ... Mercury Electronics CyberPix S-550V Digital Camera
Coolpix 3100. I changed t batteries recently and since then when I try to take pictures lens closes in and camera switches off. I changed settings but to no avail. I have used same cheaper batteries before and they work a treat. It took a couple
Try some new batteries not cheap ones, if still you have the same issue try to factory reset it, if you will need more help with your camera download a factory service manual from the below link: ... Digital Cameras
My i85 camera's lcd no longer displays what you are looking at. Just a black screen. All the menu items are there and working. The battery is charged. The power button is working as well as the lens open, but no image is available just a black screen. When I I try to take pic is showed very low light but doen't show image of pic taken when I check. Please advise. This is almost a brand new camera used only a few weeks.
The iris is probably shut closed or the CCD is bad. The iris controls the amount of light that enters the CCD (charged coupled device). Sometime the iris get moisture inside and cannot open. Or the CCD is defective. Leave it in a dry environment for ... Samsung i85 Digital Camera
My i85 camera's lcd no longer displays what you are looking at. Just a black screen. All the menu items are there and working. The battery is charged. The power button is working as well as the lens open, but no image is available just a black screen. When I I try to take pic is showed very low light but doen't show image of pic taken when I check. Please advise. This a brand new camera and was taken excellent pic as of this friday.Thanks
My i85 camera's lcd no longer displays what you are looking at. Just a black screen. All the menu items are there and working. The battery is charged. The power button is working as well as the lens open, but no image is available just a black screen ... Samsung i85 Digital Camera
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera
The lens on my samsung s1050 was stuck so I used the vacuum to **** out any dust or sand that might have jammed it,this worked and the lens opened and closed easily, now everything looks blurry on my camera, I can't even recognize faces, I've tried resetting it and changing up some of the other settings but nothing's worked, please help.
HelloThe problem is that the lens has become derailed in the barrel\012 after sand particles jammed between the barrel and the lens. Although the lens will still freely move, it is still not entirely in its housing.There are some DIY solu ... Digital Cameras