Having problems with your Canon PowerShot S3 IS Digital Camera ?
Eos utility 2.6.1 on windows 7 can not see
\015 Eos utility 2.6.1 and ZoomBrowser 6.4.1on windows 7 can not see PowerShot S3 IS (driver: 6.1.7100.0)\015
Repair Help & Product Troubleshooting for Canon PowerShot S3 IS Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Eos utility 2.6.1 on windows 7 can not see
... Canon PowerShot S3 IS Digital Camera
Hi there, i have this canon eos 7d camera with the final firmware. also final version of eos utility is installed on my pc. my problem is, when i connect the camera to my pc with a usb cable eos utility can not recognize the camera. when i use a card reader i can see the pics i took with the camra but i need to connect the camera to my pc so i can make timelaps shoots. any idea to solve this problem? thank you.
Have you tried other USB ports on your computer? Also, try these:\012Solution: Windows should automatically recognize your digital camera and prompt you with a list of possible actions, such as viewing the pictures stored on your memory card. ... Canon EOS 7D Digital Camera
My computer (Vista 32-bit) does not recognize my Canon Eos Xs now. It did last week. I looked it up on Control Panel/System/Devices and I see this message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." Windows checked for a driver upgrade and reported that what is installed is the latest softw
Sounds like you may have some corruption beginning on your hard disk - try running CHKDSK /F from an administratively-enabled command prompt. It will prompt you to reboot, then it will run a consistency check on the disk and its filesystem upon boot ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
EOS Utilities does not recognize EOS Rebel XS in Windows XP(on PC). Same camera does communicate via same usb cable with laptop in Windows 7. Is there another driver required for XP?
Consider NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the compute ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
I downloaded pictures from my Canon EOS Digital Rebel XSi to my PC using the EOS utility, then burned the folder to a DVD. The computer I used has Windows 7. I then tried to view the pictures on my desktop which has Windows XP. Clicking on a picture icon tells me that the picture is too big to view. All the pictures are 4272 x 2848 pixels. How do I change the size of the pictures when they are being downloaded so they can be viewed?
Download this program: FSResizerIts a very friendly program that can RE-SIZED the images; just download and install it, then open the program, sear ... Canon EOS 400D / Rebel XTi Digital Camera
I have a EOS 2D Mark II & I can't get all of the functions of the EOS Utility software to work. My computer (windows 7 (64 bit) recognizes the camera but when the utility software opens all but one of the options is not grayed out. I tried reinstalling the software but still have the same issue. Hence, I can't adjust any camera settings or view any photos. I want to use the teathered capture & remote triggering options available but can't. The manual suggest that I connect using the IEEE 1394
I don't see the problem with finding a Firewire cable as they are pretty standard, though I am having trouble finding references to a Canon model EOS 2D. Canon don't seem to have heard of it.Firewire is usually a feature of digital video ... Canon EOS-1D Mark II Digital Camera
I have a canon eos rebel xsi 450D. i loaded the eos digital solutions disk on to my windows xp computer. it seemed to load fine. the memory card manager screen appeared on my computer.then a small EOS utility screen appeared and read " camera is not recognized" and would like me to click ok. please advise. my phone number is 617-795-2558. e-mail: [email protected]
Not a good idea to post your phone # and e-address on this or any other site.This question arrived on FixYa.Problem is the camera firmware isn't compatible with the software possible needs a Canon free update or purchase a car ... Canon EOS 450D EOS Rebel XSi Digital Camera with 1785mm and 70300mm lenses
Bought canon rebel xsi camera and cannot download to computer. Small EOS Utility window opens to select software to download pics to but is blank, nothing for me to select. Top of window says camera connected to computer. Have uninstalled Canon software and reinstalled but did not help.
You could possibly try putting your memory card in a card reader and manually move them in Windows Explorer. They are located in DCIM folder. ... Canon Digital Rebel XSi Digital Camera
My windows PC does not detect 1000D purchased pre used without eos disk utility and bundled softwares, is it a must to install these
You don't need any special software.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
Can't download with EOS Utility
Try to change connection type to PC on camera menu. Maybe you have a print/ppt connection set. ... Canon Digital Rebel XSi Digital Camera
Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the
Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera
I just got a new hp laptop with windows 7. i loaded the software for the camera successfully and the driver for the camera. when i connect the camera to the computer with the usb cord, the camera is not opeing the eos utility and i don't think it is recognizing hte connection. do i need to do anything else to set up the connection?
Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Canon PowerShot SD600 Digital Camera
I am trying to download my pictures but the software does not recognize the camera or the disk within the camera. I can see (play) the pictures on the camera, hence the disk does not appear faulty. I connect the camera to the computer using a USB lead to download the pictures and click on EOS utility software. The battery is fully charged, the camera flashes saying it is 'busy' but there is no flashing red light to signify the photos are downloading. After a few minutes the camera goes dead (the
Use a card reader to download your pics to a folder you create on your desktop. ... Canon Rebel XT / EOS 350D Digital Camera
Can't dowload picture to computer from Canon EOS 550D
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via ... Canon EOS 550D Rebel T2i Digital Camera
EOS Utility does not recoganize Canon Rebel Xti
I believe there are 2 modes of usb transfer that you can pick in the camera. They are set somewhere in the menu in the options. If you go through the menus thoroughly you'll find it. One option is for connecting the camera directly to a printer an ... Canon EOS 400D / Rebel XTi Digital Camera
EOS Utility does not Recoganize Camera
I am not sure about this matter but it seems there is a problem with your new computer. it might not recognize the usb cable.try to plug your camera in another USB port and try again. ... Canon EOS 400D / Rebel XTi Digital Camera
EOS Utility program cant download pictures.
It's very hard to troubleshoot software problems online, and it likely is a software issue. You may fix it, but it will pop up again some day. Camera/cable interface problems are notorious. But why put up with the headache of these software problem ... Canon PowerShot SX100 IS Digital Camera
EOS Utility program cant download pictures.
1'st thing. You don't have an EOS camera so you won't be able to use EOS utility. ... Canon PowerShot S3 IS Digital Camera
Importing pictures using EOS utility
I had the same problem, I think you were missing a driver. if you got to canon usa's page for drivers and downloads you should be able to find it :http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=3 ... Canon Rebel XT / EOS 350D Digital Camera
When I Conect the camera to the PC (SO: Windows XP SP2) I listen the windows's sound of a new component found, but nothing more happen, and I can't see the icon on "My Computer" to open and see the files inside the camera. Thanks.
Hallo this can be a sftware probem or symply tou dont have the sxact driver for you camera. the pc ask you to instal the new hardware???if the pc ask to instal the new hardware is possible that you have a disk with driver, if the camera make ... Sony Cyber-shot DSC-S730 Digital Camera
I recently bought a new computer with windows 7 on it..........i have a phillips pj44432 digital camera. my new computer doesn't see the camera......what can i do to get the computer to see the camera. It worked on the old computer with windows xp
It may or may not work, but try installing as Administrator and setting the program's EXE into "Compatability Mode for XP SP2",and also, running as Administrator. Also Disable UAC too. Windows 7 just doesn't want to support any hardware over like a ... Philips PJ44432 Digital Camera
I need to install my Cannon EOS 400 D Camera to a Micosoft Windows VISTA computer. The Installation I had supplied with the Cannon EOS 400 D are for Microsoft Windows XP.
Check this link to see if it helps : http://www.usa.canon.com/consumer/contr ... Digital Cameras
EOS Utility I purchased a Rebel Xsi, and installed the software. Upon connecting my camera to my computer, and launching the EOS Utility, the options to download the images, select images, or camera settings are shaded out. In order to transfer pictures, I have to go into "My Computer", open up the camera and copy and paste it. I have updated all of the software from Canon's website with the June 2009 updates, and the problem persists. Thanks for the help.
I got the same problem updating the EOS Utility. The version on the original SXi CD is 220.127.116.11. The upgrade is version 2.6.1. I suggest you to uninstall all the updated software. Or at least the EOS Utility. Go to the folder <C:\\Documents and Se ... Canon EOS Rebel XSi Digital Camera
Omgggg help me please im gonna die for this kodak camra ok well i was in borders book store and my friend wanted to see my red kodak easyshare m853 and as i was handing it too her we dropped it when the lens was extended and for the first 2 min after dropping it it worked fine i jus picked it up and went on than like 5 min later it said lens error 1,22,1,0,0 or something like that help other people said force the lens back in but when i try i can see the screen going to pop open and i dont wanna
Please don't die. Unfortunantly this fault needs to be repaired.\015\012\015\012Because the camera has been dropped KODAK might determine this fault as Out of Warranty\015\012\015\012An Out of Warranty repair for this model fo ... Kodak EasyShare M853 Digital Camera
Canon EOS400D can't access EOS utility, computer says camera not recognized. I've updated drivers for Vista OS, still no success. can't change owner name in camera as can't access EOS utility, cna't download photos from camera with usb calbe......help? Robin
... Canon Digital Cameras