Having problems with your Fuji FinePix S3100 Digital Camera ?
FUJI S3000 CAMERA WILL NOT POWER ON, NEW BATTERYS INSTALL NO RESPONSE FROM CAMERA
Camera will not power up. It just up and died on me. I am hoping there is some sort of hard reboot or reset option.
My camera now works!!! Found a suggestion to clean the battery compartment on opposite side of switch with lighter fluid. Only had pressurized fluid for lighter so used rubbing alcohol instead. Put a few drops of 70% Isopropyl alcohol in chamber and clicked switch several times. Dried with hair dryer. Didn't work, tried again. Didn't work. Then tried a few drops of wd-40, clicked several times, rinsed with alcohol, dried with hair dryer, clicked several times AND IT WORKED. Still works. Thanks everyone(especially codmac) for the ideas.
Repair Help & Product Troubleshooting for Fuji FinePix S3100 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
FUJI S3000 CAMERA WILL NOT POWER ON, NEW BATTERYS INSTALL NO RESPONSE FROM CAMERA Camera will not power up. It just up and died on me. I am hoping there is some sort of hard reboot or reset option.
My camera now works!!! Found a suggestion to clean the battery compartment on opposite side of switch with lighter fluid. Only had pressurized fluid for lighter so used rubbing alcohol instead. Put a few drops of 70% Isopropyl alcohol in chamber and ... Fuji FinePix S3100 Digital Camera
On my GE E1050TW digital camera, when i start it up, it has a list of options such as '640x480p NTSC 4:3' and '720x576p PAL 16:9'. When i choose one of these options, another screen comes up with three options, 'YCbCr444', 'YCbCr422' and 'RGB444'. The first two are shaded grey and the last one is the only one i can click. when i do, the screen goes blank but the power light stays on. What ever i do, i cannot do anything to make my camera work. Is there a way of resetting it or something to make
These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen. ... General Electric Digital Cameras
Lens error When I first power on my camera, it tells me to retry power on. When I do, it says lens error and shuts down. The lens will extend and then close before the power shuts off, however it does not close fully. The protective shutter on the lens doesn't close completely. I have tried removing the battery and letting the camera sit for awhile hoping that the camera will reset, however this has been of no help.
Maybe the lens is stuck. ... Casio Exilim Zoom EX-Z80 Digital Camera
I have an Olypus FE-230 Digital Camera, and I was trying to upload photos to my computer. This wasn't working, so I ejected it, but instead of ejecting I was told the device was improperly removed (though I hadn't disconnected it at all). Now when I turn it on I only get a screen with two options: Power Off or Reset. I've only clicked Power Off, but I can't get anything other than this screen. The battery was running low so i've charged it. It isn't fully charged, but should be at least half-way
Do the reset. ... Olympus FE-230 Digital Camera
Hi , My Fuji S9600 has just refused to power-up using batteries, although it still powers-up and operates correctly when i attach the mains PSU adapter. I wonder if this is a common occurrence on this model and how easy it is to get sorted. I have used rechargeable batteries since the camera was new (approx 3 yrs) and have tested the batteries as V.good. So i'm assuming that the problem is with the camera somewhere. Do you think if i reset the camera in the menu that would cure the problem , or
A few things here may cause the problem you have First the rechargeable batteries don't hold their charge like alkaline and will drop to zero or near zero voltage in just a few weeks. They may tun on a light but won't have enough power to operate a c ... Fuji Finepix S9600 Digital Camera
PD170 - NO POWER. Dead as doornail. AC or batts.. No surge/ or anything strange happened... was having issue of resetting itself everytime turned the cam on...but that stopped recently. Is there an internal batt that if died, would stop the cam from powering up? Help!!!!
Did u get it fixed? <Mine just did the same thing...HELP [email protected] ... Digital Cameras
Camera dying? It will powerup like normal. But when a CF card (tried different ones)is in the camera and you press the button to take a photo, the screen will either shut off clean or give a flash of scrambled image then shut off and freeze. The only way to reset is to remove the batteries. It is also draining the batteries in the few attempts to power it on. When no card is in there it will stay 'alive' for a bit longer but pressing any button on it and the lense will power down leaving
CCD problem is the likely cause here and once you have another one put in camera should work fine. ... Konica Minolta DiMAGE S414 Digital Camera
The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem
Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera
I have a Canon Power Shot S2-15 (5.0 mega pixels) My husband was taking pictures in the house and the image stopped showing up on the view finder or the screen. One minute it was working, the next it wasn't. I am hoping he changed a setting or something that can be reset. All of the menu items still appear, but there is no image. What happened? I really don't want to have to buy a new camera before we go on vacation. HELP!!!
Just take out the batteries from the camera take out the memory card too and keep the camera idle for 15 Min replace the battery and try to use it if it works it is a memory card probs if not try to insert the memory card and try it should work ... Digital Cameras
My Pentax Optio M4 suddenly started to shut down and power off after starting up. It starts up normally, then gives 3 short beeps, then shuts down as if I had just switched it off. I have recharged the battery but the problem still remains. I cannot reset the camera to factory defaults as it doesn't stay on long enough for me to access the memu options.
... Pentax Optio M40 Digital Camera
I just bought a Nikon D40. The monitor shuts off after being on for only 5 secs. I Have tried changing out the battery with a fully charged one and the problem persists. Is there a way to set the duration of the monitor being on? Is there some sort of power saver option? Thanx Skip B
Yes , it is a power saver. I remember there being a way to change it in the menus. Note: the "monitor" stays on for different times depending on mode. There is a manual on line. I had better luck just playing with the menus. The menu your looking for ... Nikon D40 Digital Camera with 18-135mm lens
This happened last year when batteries died & now again, this time wont sort itself. Lense does not not retract - and there is no display on screen. Camera does not respond when any button is pushed. Green light comes on when power button is depressed but otherwise camera is dead. Please can you help
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Samsung S760 Digital Camera
Reset option and clean sensor option are not visible in set up menu. Canon D20 I had a two spots that kept appearing in the same area of the photo so I looked at the manual and did the clean sensor function a couple of times and the spots remain. I had also done a reset all functions since my stepson gave me the camera and I wanted to restore it to its original settings. Now I don't see either the clean sensor option or the reset in the set up menu. Help!
First of all - great camera! Check out http://www.dpreview.com/reviews/canoneos20d/ for a lot more information on the functionality. The sensor clean functio ... Canon Digital Cameras
No Power Battery needed charging, charged it, placed in the camera as usual,s till no power. Just brought a new battery with the hope that the battery is faulty or past it's sell by... Have to say though.. the manufacturer said that there is a little power in the battery so I attempted it to see if there would be any joy, alas still not powering up. I currently recharging the battery to see if this does the trick... however not hopeful... Quite surprised that such an expensive bit of kit is faul
... Canon PowerShot G7 Digital Camera
I cant take pictures from my new NIKON D3000.....the message coming after the click is "THIS FOLDER CONTAIN NO IMAGE".with a warning symbol....shutter is working properly...focus is also correct..i formated memory card ,tried a new memory card...reseted shooting options..reset image options...still its not working if you guys can please inform whats wrong with ma CAMERA ????is this a sevear issue ???
Hi there, i`ve once experienced the same problem as yours,have you tried to reset all the setting in the camera?you can find t ... Nikon D3000 Digital Camera
Dead Nikon D50 in mint condition... Changed lenses with the power off. Powered back on and no LCD, or any actions at all. Flash will not pop up, no shutter noise, no auto focus. No top menu, no back menu. Did the double green button reset and the hard (hole in the bottom of the camera) resets while both on and off, with and without batteries, with and without SD card and every combination. Tried different lenses, also without a lens. Tried with two additional Nikon brand, fully charged batteries
Sounds like a power problem. Try checking voltage of battery and cleaning contacts with a cotton bud and electrical contact cleaner $8 at repco. Had a similar problem with a pentax mini slr. Verdigris (****) on battery terminals is dynamite in low cu ... Nikon D50 Digital Camera
Have you tried leveing it on with the battery in for a while ... Nikon D50 Digital Camera
Reset As I told you before, under the setup 2 option, I do not have a choice to reset. I have three options: Language Video Communication Is there somewhere else I should look?
The reset option I think that you are refering to is not available if the mode dial is set to any of the settings from full auto down (this is called the basic zone)The reset option is available when the mode dial is set to any of the settings ... Canon Rebel XT / EOS 350D Digital Camera
I have just got back from holiday where I took 325pics. Earlier today I was able to see them on screen but had not yet downloaded as I was going to take to a store to print out tomorrow. Now when I switch the camera on it gives me 2 options - Card Setup either power off or format. I don't want to press yes and delete the pics but if I press no the only other option it takes me back to is to power off. At this time i can't take any photos either. Camera - Olympus C-480 zoom with an XD Pictur
Whatever you do DO NOT FORMAT the card. Take it in to a CAMERA shop, not walmart or drugstore, They can probably remove the card and print from that. Sounds likeyour card is full. They can then put all your pics on a CD and you can then reformat th ... Digital Cameras
Sony cybershot dsc-n1 took 6000 pics and stopped working Screen went white before died with lense extended no sign of power next cybershot DSC-N2 took 15,000 pic and died just refuses to turn on. no power battery shows 4 volts do these cameras have a limited life pan?
No non of sony cameras come with any life pan\015\012ya they are telling something baout life cycle \015\012but i have cybershot with 29000 pic and my friend is having about 20000 so if your cameras is in warrenty period then go to sony s ... Digital Cameras
Panasonic CP412 no power light. Pull DC Power away and reconnect power light comes on and camera works. Then pwr light goes off and can only be reset by pulling power.
... Digital Cameras
Several days ago I accidently left my camcorder in the "on" position. When I tried to turn it on yesterday it would not power up, so I changed to a charged battery, but still no power. I tried the AC adapter, but still no power. I tried reset, but nothing. I cannot get the camera to power up.
Hi,This is a common problem. This is an internal problem and needs repair. As you have tried to use an AC adopter, that would confirm that nor the connectors is at fault. This would moreover, confirm a problem with electronic circuitry. U ... Digital Cameras
Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt
... Canon Digital Cameras
I have an Avtech AVC783 stand alone DVR. It has a start up fault - when the power is connected it beeps twice per second & relay is clicking too. I suspect a power surge or power management area problem in the circuitry. Power supply is DC12-18V. I would like help on fault identification from tech experienced with DVR's. The repair options please.
... Digital Cameras
MY canon eos 40d does not show the reset option and the live view mode options
... Canon EOS 40D Digital Camera