Having problems with your Kodak Easyshare M753 Digital Camera ?
I have a brand new Kodak 'EasyShare M530' digital camera which is supposed to take 12 Megapixel photo's. I have only had the camera two weeks and the screen is now pinky/red and every photo it takes is out of focus with a red tint on it. Can you please help? I am not sure if it is inside the camera or perhaps the lense. I have cleaned the lense but the pink/redish tint still remains. I might have to take it back but just wondered what an expert would think of this.
Take it back....it's not going to get better.
Repair Help & Product Troubleshooting for Kodak Easyshare M753 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hello there. I have a brand new Kodak 'EasyShare M530' digital camera which is supposed to take 12 Megapixel photo's. I have only had the camera two weeks and the screen is now pinky/red and every photo it takes is out of focus with a red tint on it. Can you please help? I am not sure if it is inside the camera or perhaps the lense. I have cleaned the lense but the pink/redish tint still remains. I might have to take it back but just wondered what an expert would think of this. Kind rega
Take it back....it's not going to get better. ... Kodak Easyshare M753 Digital Camera
Why is my olympus e420 taking green tinted photos? I bought a new camera which I received yesterday, and it was until earlier, but has suddenly started taking yellowy/greeny tinted images. I've tried changing the settings, I've changed the camera modes, I reset the settings altogether and even changed lenses and yet the camera still takes tinted pictures, inside and outside. Also, when I switch the camera to live-view mode (shows exactly what the lens sees) it shows pretty much an entire green s
Im having this same problem. I have yet gotten it solved.. have you fixed it yet? ... Olympus E-420 Digital Camera
When turned on lense would only retract partially and then turn off. took it apart. I have it to where the camera will now go on, am able to take a photo (all normal) except I cannot get the lense to "attach" to the camera properly. Cylindrical lense. three screws protruding from it. not sure if the lense mounts on a black ring on the front or under the ring. The "in out" mechanism works but it will not grab the lense (cover?) to move out then retract. Seems to need to attach under the ring but
Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fixya.com ... HP Photosmart M415 Digital Camera
I dropped my camera in water, the lense got moisture in it but was working right away. I had opened the inside of the camera to make sure nothing got wet. I set it out to dry. The lense is dry of moisture but the buttons wont work and the camera wants me to input the date. But, since the buttons won't work I can't, and now I can't take picutres.
Get a new camera - you will have other problem besides the obvious ones. Liquid will produce corrosive material after it drys and remain in the camera and will be difficult to remove later. ... Fuji FinePix F20 Digital Camera
Blurry lenses Same problem exactly. I'm not sure what happened (maybe sand in the camera?) The camera now turns off to a black screen, If I push the botton to see ast pictures, the screen works again and lets me see through them. But If I go back to "take picture mode", the image they give me is all blurry and if I try to use the zoom, the camera turns off.
This sounds like you have gotten some kind of contamination inside the camera, it is blurry because the lens can't move to focus the image in a smooth manner, it is sticking. U can try taking this apart but based on my experience this is best left ... Olympus FE-280 Digital Camera
Umm, im not quite sure what happend to my camera but i really need your help other wise my sister will kill me.Well I was looking through photos and then the screen just went a greyish tint and the lense wont go back in. The camera has also frozen and it wont turn off! I really need your help !
Ok.i will help you. please take your battery of the camera and put one more time.if it dont work go to a near by servicing center ... Samsung L100 Digital Camera
Camera dying? It will powerup like normal. But when a CF card (tried different ones)is in the camera and you press the button to take a photo, the screen will either shut off clean or give a flash of scrambled image then shut off and freeze. The only way to reset is to remove the batteries. It is also draining the batteries in the few attempts to power it on. When no card is in there it will stay 'alive' for a bit longer but pressing any button on it and the lense will power down leaving
CCD problem is the likely cause here and once you have another one put in camera should work fine. ... Konica Minolta DiMAGE S414 Digital Camera
I receive the same "errr" message. The photo shop said it was a bad contact, they cleaned them with an eraser and made sure there was good contact. Problem was slightly better, but still exists. I have to remove the battery to clear the problem, turning it off and back on does no good. You can actually feel the lense move ever so slightly. Camera has gone back to Nikon for a repair. Very disappointed at this point with this. Camera store acknowledged that they have seen many of these.
My theory is the plastic lens mount is not strong enough to support the lens and maintain a proper connection between the camera body contacts and the lens contacts.\015\012\015\012This problem is widespread and Nikon needs to own up to t ... Nikon D90 Digital Camera with 18-105mm lens
MY camera seems to be overexposing all pictures taken , so that I can not take outdoor photos at all and can only take photos inside if I close the drapes and block all natural daylight. It seems as if perhaps a settings button has been accidently hit or something...NOT SURE but I do not see how to fix it.
Hello, the problem that you explain could easily be caused by an improper "ISO" setting. When you go to your camera's menu, look for the ISO setting and put it back on "auto". It's probably on 800 or higher now, which will cause everything to be ove ... Kodak EasyShare Z612 Digital Camera
I have an older pair of zoom lense Bushnell binoculars, 40mm with 7 to 21 power. I used to have a cabin in a very humid, mildewy area of Florida and it seems that the mold (mildew) has found its way into the lens whereupon it really messes up the viewing. I took the end pieces off and cleaned the insides with camera lens cleaning items and that helped, but I think the eye pieces need to be removed to finish the job. How do you do that? I'm not sure they are screwed onto the body! Has anyo
I am not familiar with this make, nor with zoom binoculars in general, but for a normal binocular of traditional design, you can take the eyepieces off together, as a unit, by dismantling the focussing mechanism. This is likely to be complicated by t ... Digital Cameras
My Canon Rebel XTi has repeatedly had the Err99 message pop up, and it's to the point that it happens, at minimum, every 4-5 shots I take. I've tried cleaning the camera and lens contacts multiple times, but the problem has gotten increasingly worse and refuses to be fixed. I have a 17-85mm Canon zoom lens and I'm not sure what I should do at this point.
There are several issues which may have caused this, one is the CF another are the lenses. I found the solution months ago from this ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens
Why doe's my camera keep getting dirty inside i take great care when changing my lenses i had it cleaned by olympus about 2 months ago and only change the lens twice since and the pickup had dirt on it again
It only takes a few seconds for dust in the air to be attracted to the sensor during lens changes. Also, the lens itself may have dust on it....always check that out. You could learn how to clean the sensor yourself. It's easy and inexpensive. Just G ... Olympus Digital Cameras
I have dust particles on the ccd chip or inside the lenses and it shows up in my photos- how do i take the camera apart to clean out the dust?
Without model and brand info of your camera, how can any one help you? ... Digital Cameras
Olympus FE-230 7.1 Megapixel. When I turn on the Camera. The display screen is a light purple. Unfocused and lines through it. I thought maybe it was just the screen display but as I went to take a picture. Thats exactly how they came out. I cleaned the tip of the lense thinking maybe it was smudged or something. Still nothing. Does this happen often?
This sounds severe. I guess you have no other way than to return it t your dealer for a repair.CheersCritter ... Olympus FE-230 Digital Camera
Lense will not retract. I get an E18 error message. I can turn camera on and off, delete pictures but cannot take pictures. I opened the compartment with the battery, removed it and reinserted it. I also wiped the contact with a clean cloth as advised in the manual.
Hi,Here is a tip that I wrote about How to get a Digital Camera Lens to work againSteps to Repair a Digital Camera ... Canon PowerShot SD500 / IXUS 700 Digital Camera
I dropped my camera and since then I can take photos, the camera focuses, my display is fine when viewing previously shot images and the normal display information but when the shutter is pressed all o see is black. I don't know if the images are being taken or if they aren't. I tried taking of the lense and pressing the shutter and a black box with a **** of light shows. With the lense on nothing but black shows. Is this issue with the lense or body? Any feedback is appreciated.
When you take off the lens and fire off a shot, does the mirror go up and return or does it stay up? If not, is it possible that it is staying up when the lens is connected? When you fire a shot, can you hear it returning? ... Canon EOS 400D / Rebel XTi Digital Camera
I'm not sure what is relevant and what isn't but... Two days ago I tried taking a picture on my timer and all of them came out blurry. I wasn't sure why this was so I started poking around on the camera and decided to reset all factory settings. Then that evening I tried to upload my pictures to my computer as usual. The software (Picasa) locked up. I tried taking the camera out of the cradle and turning it on but it wouldn't turn on. I rebooted my computer and tried turing the camera on
Sometimes a camera software upgrade will help, but it is hard to find software online. I first would look on manufacture's website to see if there is any driver updates you can download to your pc, then do the same with picasa software. Also make sur ... Digital Cameras
Lense error- can hear lense trying to open, but lense does not come out of the camera body. This is weird because the camera was not dropped/hit/damaged. I used the camera to take night images of a rising moon. It took pics fine, but about an hour later when I tried to turn the camera on to review the pics, I got the lense error as noted above. 4 days later, same problem. The manual doesn't have any troubleshooting for this problem. Any suggestions? Anyone.....? Thanks for your time!
Here is an excellent article that will give you five safe ways to help resolve the problem. I have heard the solution using canned air works well. That's solution #5 in this article.\015\012\015\012 ... Nikon COOLPIX P80 Digital Camera
I found a Quantaray 55-52 mm step down ring (Manufacture # 241664614) on Wolf Camera's website that I am interested in purchasing, but want to make sure it would work for me. I have some close up lenses (Hoya) for my old Canon SLR film camera (55mm) and was hoping I could use those lenses on my newer Nikon DSLR (52mm) camera. Would the step down ring make it possible to attach and use my old camera's close up lenses on my new DSLR camera? Thanks, Jerry
No. The 55-52mm step-down ring will let you attach a 52mm attachment onto a lens with a 55mm thread. You want a 52-55mm step-up ring. ... Digital Cameras
Hi, I have two Cannon 40D Cameras and am experiencing problems with both at the moment. One Camera is very slow after pushing the button to take a photo. I have checked all of the batteries and this is not the problem. The other camera will take 4/5 shots without a problem then as I am taking the shot I feel like the camera flutters, the lcd screen shows an error symbol and says the contacts between the lens needs cleaning. When I turn the camera on and off it fixes the problem temporarily but i
Problems like these can be addressed by Canonusa.com which can be contacted at 1-800-OK-CANON.\015\012 ... Digital Cameras
I have a Canon PowerShot S5 IS, and a few months ago I started getting a lense error whenever I went into phototaking mode. Every once-in-a-while when I went into the "view pictures" mode, the lense would retract itself, but when I tried to take pictures again, the lense would go out and "lense error. restart camera" would appear on the screen. A few weeks ago I finally got my camera fixed at a shop. I got the camera back and used it for about a week, now the same problem is happening. I've
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot S5 IS Digital Camera
My Canon 5D mkI turns on ok, will focus, displays top and back, but it will not take a shot. I have two batteries, both which I have charged to full and tried (display shows full charge). I have also tried two seperate CF cards. I have tried cleaning all contacts. Still it won't take a photo. The shutter will work when I use the "clean sensor" function though. Also, I have reset all settings on the camera. Anyone know why the camera isn't firing off a shot?
Hicould you tell me the amount of shot number when you put memory card in? If yes, please move to manual position from auto on the side of lens. And try to press release button.there is other one thing you have to chack selftime release working or n ... Canon EOS-5D Digital Camera
I applied lens cleaning fluid directly to the lens of my camera, a Fuji F50FD digital compact, but it seems to have leaked into the lens housing. Any photos I now take appear with mutiple fine white streaks across them. Curiously, when I shoot in video mode the footage appears completely unaffected. Is this something that I can fix myself - is it just a question of taking the camera apart, then cleaning the inside with care? Or would the lens housing now to be replaced?
This is not something I would recommend you do without the proper knowledge or alignment tools. You would probably just end up with a brick instead of a camera. Sending it to a repair center would be very expensive. Possibly much more than the camera ... Fuji Finepix F50FD Digital Camera
Lense will not close when it cuts off, now it will not take pictures, fujiflim a100, when the batteries would die the camera's lense would not close now it won't take a pic what can I do its my sons camera
Lence will not close when it cuts off ... FUJIFILM A100 Digital Camera
Taking casio ex-s3 apart to clean lense
... Casio Exilim EX-S3 Digital Camera