Having problems with your Kodak EasyShare P712 Digital Camera ?

I accidentally used a damaged SD card on my Kodak P712, so it flashed that "error" message. but after that every SD card i used, whether my own or new, it always flash that "error" message now. I't can't read any card and it just stuck on that error screen unless i remove the card



Answers :

The problem is that your camera will only read SD cards, not SDHC cards. After you damaged the SD card that you've been using for years, you bought a replacement, not noticing that it was SDHC. The new cards don't work, not because they or the camera are broken, but because they're not compatible.

Cards up to 2Gb are generally SD. Cards over 8Gb have to be SDHC. 4Gb cards can be either SD or SDHC, but are almost always SDHC because they're cheaper. (I would avoid the rare, expensive, and problematic 4Gb SD cards.)

Your solution is to go find a 2Gb card, and be extra sure that it doesn't say "SDHC" on it. (If it does, it probably means that they made a 4Gb card, but there were some error locations and so they disabled half of it and packaged it as a cheap-brand 2Gb.)
Repair Help & Product Troubleshooting for Kodak EasyShare P712 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I accidentally used a damaged SD card on my Kodak P712, so it flashed that "error" message. but after that every SD card i used, whether my own or new, it always flash that "error" message now. I't can't read any card and it just stuck on that error screen unless i remove the card


The problem is that your camera will only read SD cards, not SDHC cards. After you damaged the SD card that you've been using for years, you bought a replacement, not noticing that it was SDHC. The new cards don't work, not because they or the camera ... Kodak EasyShare P712 Digital Camera

I have a Nikon E5400, ver 1.3. I bought a 4GB Kingston CF card; the package said "formatted and ready to use". On inserting into camera, the message flashed that the card is not formatted. So I proceeded to format. The next message that flashes is "Out of Memory". Questions: 1) is the CF card defective? 2) is E5400 incapable of reading a 4GB CF card, should we use only CF cards <1GB? 3) Will a firmware version upgrade to v1.4 help? 4) Any other reason why this could happen?


It cannot use a card larger than 2GB. Format the card in the camera. Insert it into a card reader and change the partition side to slightly under 2GB. The problem is FAT16 does not support more than 64K sectors of size 32K. ... Nikon Coolpix 5400 Digital Camera

I have a Pentax K 100 D. I have tried using a Flash Memory card (a Sandisk Ultra 16GB) but without success. The message 'Memory Card Error" is displayed even before I could format it. The card had previously been used to store files from my PC (where it worked perfectly) but the camera could not format it even after I had removed all the files etc by reformatting it in the PC (FAT32). Is there any way I can get to use this flash card in my camera?


Hi Doc.SD cards different in size use different technology. there are design changes introduced at 2GB and 4GB that makes cameras not compatible with all cards.When this camera was introduced, it was compatible with cards up ... Pentax Digital Cameras

Is there a maximum SD memory card that I can use on my Panasonic Lumix DMCZ7. I have tried to use a 16 & 24Mb SD card but the camera will not read it and displays a ' card error reading message'


I think you mean 16 and 24 GB (Gigabyte), not MB, but those would not be SD cards. A card that size is actually an SDHC card. SD and SDHC cards fit the same slots, but they are slightly different. Many cameras won't work with the SDHC (high capacity) ... Panasonic Lumix DMC-FZ7 Digital Camera

I have a fujifilm a235 and have tried 3 SD cards in the camera, the camera says card error to everyone of the cards. I have formatted all the cards in the camera, and the cards work ok in a different camera but cant get the camera to work. This has happened quite a few times with the camera, has spells of working ok and then either has message, card error or read error. I sent the camera back to yourselves last year for this problem and it was returned that no fault was found. The camera did


... FUJIFILM Finepix A235 Digital Camera

Memory card errors. I turn it on and get message MEMORY CARD ERROR PLEASE CHECK CARD. Occurs on different cards. Sometimes I can clean the contacts on the card and it will work. Sometimes, I can take pictures but if I remove the card it cannot be read if install it back or by a computer or printer. I use the camera as publicity in trade shows taking then printing pictures, so the cards are removed and inserted constantly. I have reformatted the card in the camera, still fails.


Hi wait a moment pls your request is been proceeding.. ... Panasonic Lumix DMC-FZ18 Digital Camera

I bought a brand new sanyo e1292 camera and cant not get arround the error message of formatting the card, try different cards and size and still the same message. "Card requires formatting" this is a lie since my other digital cameras reads all the SD cards I tried with this camera. Any solutions? I think this is a firmware issue.


Are you saying that you have not tried formatting the card in the camera even though the camera wants you to? ... Digital Cameras

Hello, I have a Nikon Coolpix S6000. It has worked well until this evening when I attempted to erase multiple selected images from the camera. It then froze for a minute and when I got it running again it gives me an error message saying "This card cannot be read". I've been using this memory card for months with no problems, and my computer can still read all of the images. Is the problem with the camera or the card?


Hi1) Mostly its card problem2) You must be format your card in your computer 3) Now put your card in camera and format card twies , if error comes again then do this proces again4) If this not solve your error then tell me ... Nikon COOLPIX S6000 Digital Camera

Olympus mju 1030 sw... the card cover open error message is permantently showing when camera is turned on. have checked coveres dozens of times. the camera seems in good order. just cant get past this error message and therefore cannot use the camera.


Only see the question again- therte is no soloution posted here ... Olympus Digital Cameras

Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pic


The first thing that may be complicating things is, can your laptop read SDHC cards, or just SD cards? If the laptop is asking you to format it, then probably it's working, but be really sure, before you continue.Check the co ... Digital Cameras

Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pictures.


Take the card to a Walmart and insert it into one of their picture kiosk machines. You can print the pictures or even make a CD of them. ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Brand new Panasonic LumixDMC-TS1. When the camera is turned on, message reads "Memory card error Please check the card". We cannot get past this unless we remove the card and simply use the built in memory. Bad card or problem with the camera?


Have you tried formatting the card - either in the camera, or on a computer? ... Digital Cameras

Nikon coolpix s1. Camera displays message : "this card cannot be used" with no memory card. and then no buttons work. With the memory card installed no photos can be save and error: Card cannot be read. I was thinking it might be a firmware problem, I would like some idea before I send it off to be repaired?


Its possible that the internal memory is busted. The solution for this is... Buy a memory card, memory cards are cheap nowadays. If using a memory card still doesn't help. You might want to just get yourself a new camera because you probably wouldn't ... Nikon Coolpix S1 Digital Camera

When I turn on my DMC-LS75, it displays this message:Memory Card Error - Please Check The Card. HOWEVER, the same card can be read in my computer and can be used in another digital camera.


Never heard of that brand name, all memory cards work by the same set rules. Check to see if memory is installed wrong. Check to see if it is compatible with your camera. Inretrospec, I would have to suspect it's a bad PCB in your camera.\015\ ... Panasonic Lumix DMC-LS75 Digital Camera

I have a sony digital camera W390. it cant read the memory card when its inserted in the slot. message dislpay on the screen says "reinsert the memeory card" and "error 13:01" can that problem be fixed.


... Sony Cyber-shot DSC-W55 Digital Camera

Error 5 ! Canon Rebel Xti w/ 28-135mm It was working fine! had it for 10 day's and after about 560 images taken ( 4 gig flash card ) The message read : "The built in flash auto pop up was obstracted... turn it off and on again..same problem. any simple tip ? solution ? or take it back to the dealer. I appreciate your Help ! Peter Toronto


\015\012Try the scotch tape or masking tape technique: get around two to three inches long sticky tape, stick about an inch above the flash housing, turn on the camera, hold the remaining tape upward , shoot the came ... Digital Cameras

My eos400d is taking photos but the lcd screen is not turning on at all. I cannot preview photos or access the menu. When it first did it the cf card started flashing wen I tried to take a photo. After taking some more photos I got a full cf card message. I deleted photos using my computer as I cant see anything on the screen but the lcd screen still wont come on. I have pressed the disp button also but nothing happens.


Your LCD display card has failed. \015\012This is usually due to mishandling - dropping, bumping, drastic temp change, high humidity etc.\015\012There is no end-user or easy "push this button" fix.\015\012Please contact your local C ... Digital Cameras

I am trying to use my Olympus D-460 after not using it for ~ 4 years. I downloaded the pictures from the 16 MB card using my laptop with a card reader. I then emptied the card. When I pull back the lens cover, the lens comes out but then i get an error message that the card is full. I followed the directions for formatting the card but still get a message that the card is full even though it also gives me a no picture message. i copied some of the original pictures back on to the card and can v


Glad to hear you're back in business! ... Olympus D-460 Zoom Digital Camera

How can I diagnose / clean / fix SD card reader on Panasonic FZ18? Have been having troubles with SD cards and think may be due to the camera. Sometimes get card errors, fiddle it works but can’t be read by printer or computer, Copy some pictures on computer get errors, remove copy a few more, etc. Finally can’t read at all. Used different sd readers same results. Tried several cards including new ones. All cards are 1 or 2 GB. Note used at train shows for publicity and during show, we c


The issue is that if you have stuff you took in another camera ..there is 90% chance to not be readable in the camera ...and after you use it in another one ...if it is formatted in that camera it will not be readable at all in this one ...the thing ... Panasonic Lumix DMC-FZ18K Digital Camera

I am attempting to use "Eye-Fi" connect /x2 with my canon 5d. Since my camera accepts CF cards I am using the SDHC EYE-FI card in a SD/SDHC CF ADAPTER. (SDCF-01). When I insert the SDGC Eye-Fi card into the adapter and load ithem into my 5D, the camera first seems not to be reading the card and then gives message, "Card not formatted". When I attempt to format the card in my 5D, I get the message "Cannot format card". I formatted the card in my computer and again tried to use it but the messa


... Canon EOS 40D Digital Camera

When putting a Lexar Multi-Use 16 GB SDHC memory card in my Canon Powershot A540 I get Memory Card Error message as well Card Locked message. Have tried unlocking it by the slide on side of card, is t


It's a lost cause. The A540 works with SD cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work in devices not designed for them. You need to stay with SD cards, 2GB and smaller. ... Canon PowerShot A540 Digital Camera

My M512mb olympus xd memory card will not work in my olympus syylus 760 all-weather camera. the message reads the card needs to be formatted and when i format it the message reads "card error" i have tried about 5 seperat M512 mb olympus xd memory cards and i get the same message with all the cards.


... Digital Cameras

Card Error None of my 3 memory cards are being accepted by my camera all of a sudden. I get a Card Full message, but when I try to view the images, the screen reads No Images. I've tried to format the cards again, but get a Card Error message. I've updated my firmware. The manual doesn't offer any suggestions for this error that I seem able to repair on my own. Any ideas?


If you are using a card reader for transfer to the computer, it is possible that you are corrupting your memory cards by accident (you have to make sure to eject the cards before removing them from the card reader). Try a new card and see if it will ... Olympus EVOLT E-500 Digital Camera

I have an SD 4GB card which I used to use for my Canon digicam. Now, I would like to use it for my LX2 and the LX2 won't read the card. I have reformatted the card through my mac and the LX2 still won't read the card. How do I get the LX2 to reformat the card when there is an error immediately after turning on the camera?


When the error comes up onscreen you should still be able to access the review menu (where you look at your photos), just keep pressing the button for review. even though the error shows you should definitely still be able to format it in camera. A ... Panasonic Lumix DMC-LX2 Digital Camera

CF Card I have an error message when I install my CF card. The message reads that there is a error on the CF card. I have purchased two new Sandisk CF cards and get the same message.


Please post back the error message you notice. ... Canon EOS 400D / Rebel XTi Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2522 seconds