Having problems with your Nikon Coolpix 885 Digital Camera ?

Camera will turn, applications will show in monitor but monitor will not turn on. AF is working, flash is working, but no picture will be taken nor can images be seen in monitor...it is black with the exception of the application icons can be seen. What is wrong?



Answers :

It's better for both of us if I just upload some diagrams, it's not complicated but I'd most likely miss a step in the description.
First Diagram
tri3mast_212.jpg

This diagram will show the arrow buttons and the sequence

Diagram
tri3mast_213.jpg

You should be good to go
Repair Help & Product Troubleshooting for Nikon Coolpix 885 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera will turn, applications will show in monitor but monitor will not turn on. AF is working, flash is working, but no picture will be taken nor can images be seen in monitor...it is black with the exception of the application icons can be seen. What is wrong?


It's better for both of us if I just upload some diagrams, it's not complicated but I'd most likely miss a step in the description.First Diagram ... Nikon Coolpix 885 Digital Camera

On March 8 I bought a camera in Singapore. A Xacti VPC-CG109EX. It was working correctly however on my return to Australia the monitor is showing black. The camera turns on oK and the menu comes up etc but nothing can be seen through the monitor. Is the lens broken or have I done something wrong?


I would send it back for repairs if under a warranty still. The screen is faulty or a bad circuit is the problem ... Sanyo Digital Cameras

LCD Black I went to turn on my camera and everything turned on normally( shutter opened). When we lookied at the LCD screen it is black but the icons show up. We can change setting. If you take a picture the way it is now the picture turns out black. I cannot see any images in the LCD at all. All pictures taken now are black.


Swith off the Camera and gently tap the bottom(tripod hole side) to a hard surface, I was lucky and it worked for me for the same kind of problem. ... Konica Minolta DiMAGE E500 Digital Camera

I took a picture with the camera, turned it off and set it down. about 20 minutes later I went to take another picture, when I turned it on, it powers up, lens opens, but monitor is black and if you look through viewfinder and take a picture, the image on review is also black. It still allows you to review past taken pictures, but won't show anything in the monitor.


HiThat sounds like the display is turned off for shot preview, see if you can get it turned back on by pressing a disp. button or similar, if that doesn't help then somewhere in the settings or setup of the camere there should be a reset ... Vivitar ViviCam 5385 Digital Camera

Lens problem? Same Problem - When i turn the camera on, its just black. when i take a picture, its black. and when i try to look at those pictures i took on the computer, it's still black. i can see past images fine. but one day when i turned the camera on, it was just black. is somethign wrong with the lens? what do i do.-


Hi, its a lance flap problem, so please replace the flap and find magic. if you are a technition then open the camera and remove the lance assembally and remove the motor too. now open the lance and the flap is in the middle of the ... Sony Cyber-Shot DSC-S40 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

When I turn the camera on, the image that I am shooting does not show on the LCD monitor. When I switch the camera mode to view images I have taken previously, they show up but the new images are not showing (they are completely black) Can you help?


There are many point you may want to look at.\015\012\015\012first, if the LCD does not display the picture you just capture, there is a possibility that the digital module of the device is broken and that it does not show or save the pic ... Digital Cameras

Camera shows no image through the viewfinder or on the lcd screen.pressing shutter button will actuate the camera, but only image is of a black box.using the display button to turn off the lcd does not help. the information icons show both in the viewfinder and on the lcd. camera has not been subjected to any abuse of any kind. has not been used for about 2 months


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S3 IS Digital Camera

Transfering Photos I'm using the USB cable provided to connect my XTi to my computer to transfer images. But the EOS Utility software is not allowing me to click on "Start to download images". Also, when I turn on my camera the LCD monitor says "busy" in the top left corner. What am I doing wrong?


Edmerk:\015\012In your case it seems like the software is the problem, try uninstalling it completly and reinstalling it back after a restart of your machine, also check this:\015\012 ... Canon EOS 400D / Rebel XTi Digital Camera

I turn my camera on and all the icons come on the screen but the image stays black. I get playback but I cant see an image when I want to take a picture. Its as if the lens cap is still on but it isnt. I have a Optio MX


Your camera is going to have a sensor that lets it know if the image cap is on or not, its possible the sensor might be damaged, or pressed in, or stuck. ... Pentax Optio MX Digital Camera

The LCD Monitor of my Canon PowerShot A95 shows purple, white, and black horizontal lines instead of a clear image of what is in the Viewfinder. Pictures taken while showing up this way on the LCD Monitor turn out with the same fuzzy stripes. Light lines show up in the well-lit areas of the scene and dark lines show up where the scene is dark. The problem was intermittent for months but now cannot be corrected by powering off. Thanks, Steve


See this FixYa link. ... Canon PowerShot A95 Digital Camera

I was taking pictures outside using a tripod mounting and had my Fujifilm FinePix S5000 on in photography mode - Auto mode. Upon placing the tripod for a new photo, I observed that the LCD monitor had turned white with intermittent horizontal flashing black lines. The view through the viewfinder is also white but without the black lines. When a photograph is taken the image is white. I should point out that in Playback mode I can view previously taken photographs perfectly on both the moni


Hi,It seems ccd imager chip problem, ccd imager chip is electronics device that converts an image into electronics signal. It is located at end of lens assembly in camera.CCD imager chip will be replaced to get correct view in camera mode ... Fuji Digital Cameras

I have a Canon Powershot SD1000 and when I turn it on, the screen to take a picture says it's on auto, but it's black and you can't see anything through it. If I switch to video mode or picture review mode, the screen can be seen through. I think that I accidentally put it on the wrong setting, but I don't know how to fix it.


Turn the camera on and press the DISP button on the back of the camera. This button manually turns the screen on or off to save batteries. ... Digital Cameras

Kodak M763. Display works all right if I review photos already taken, but there is usually no display when I try to take a picture. It's black. It may be that, if the battery is fully charged, I may see a display in a sepia tone or a bluish overcast. The information on the screen is bright, it's the viewfinder image that can't be seen. It would have helped me if I could turn it on while its charging, but I can't. That would have solved te question of a low-voltage electrical input. If a subject


Battery could be your issue, But it could be more then that have you try ed to firmware it. Go to the manufactures website download the latest firmware and update that. Now if that does not work don't kill the tech here he i ... Kodak EASYSHARE M763 Digital Camera

When I turn my camera on I only see a dark blue and black image with white lines running through it--could I have damaged something or have I messed up my settings? I can look at previous pictures taken, they look fine, I just can't figure out why I can't see anything through the view finder or LCD monitor in order to take new pics. i have been reading through the manual, tried new batteries (regular AA)--any suggestions?


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot S1 IS Digital Camera

When I turn camera on, my LCD monitor screen remains black. No images of what camera is aimed at appears?


... Canon PowerShot A85 Digital Camera

My screen is black when I turn on the camera so that no images can be seen on the viewing screen or in the window. I checked the settings but I am not sure what the problem could be. I just used the camera a couple weeks ago and it worked fine. Thanks in advance for any suggestions.


... Canon PowerShot S3 IS Digital Camera

I have a Nikon Cool Pix 5700. When I turn on the camera the only image I receive both the viewfinder and monitor is a bright horizontal streek on a black background. I have owned the camera almost four years and this is the first problem.


Tr to remember if there were recent bumps/falls with your unit. it might have caused some of the parts inside to get loose. have your camera to a service center and try to survey/canvass only for its repair cost.then try to survey/canvass ... Digital Cameras

When the camera is turned on the lcd screen is black. When i press the button to take a photo the flash is used and the the sound is heard but no image is seen. the batteries are good. flash working.


I used to have that, try pressing the DISP. button when the camera is in picture mode. The black screen should go away. That's how i solved the problem when i had it. ... Canon PowerShot A590 IS Digital Camera

Whedn I turn on my camera which is a digital ixus.i the screen does not focus on the image to be taken but is a blank black screen with icons from the menu in each corner. How do I get the working screen back onto the camera. Thanks.


Hi.\015\012\015\012\015\012If that was just a setting problem, you would have been able to reset the camera simply taking batteries out for one minute.\015\012\015\012\015\012Ixus cameras do not have any internal battery or no ... Digital Cameras

Black screen i own a canon digital IXUS 800 IS and when i turn it on to auto or manual the screen is black with the icons white as normal and photos turn out black-tried pressing disp. button which worked for a while but now it just turns the icons off - tried resetting to factory settings and no change i help - please - dennis mannina - london


If your camera is still under warranty, the best thing you can dois to take it to the nearest official repair shop and Canon Digital Cameras shouldfix it for free.If your camera is out of warranty, or if Canon refuses to rep ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

The camera powers on fine, although it has a black screen with no image. What type problem is this and is it fixable or not. When I go to look at the pictures I took while the display screen was blacked out the screen remains with no image. I just turned on my camera the other day and I can still acces my menu, I can see the camera details in the corner and even view old pictures but when I turn it on eveything else is black! I can't take any new pictures because of the black screan. Is this fi


I have the same problem i need help fixing it? ... Nikon Coolpix S3 Digital Camera

My Nikon d3100 only takes black photo's when the lens finder is working but the lcd is showing a black screen but still has icons so what is wrong?


Sounds very much like a CCD unit failure. This will require another trip back for repairs and now that it is out of warranty it is going to cost plenty. ... Nikon D3100 Digital Camera

When i turn on the camera the lcd screen is black and when i turn off the lcd the viewfinder is also black, no objects are seen, menu items can be seen but no objects


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot S2 IS Digital Camera

Lcd just shows black images with icons


The camera shutter fault.\015\012\015\012\015\012It's need repair camera machine shutter.\015\012\015\012\015\012 ... Casio Exilim EX-S500 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2326 seconds