Having problems with your Nikon COOLPIX L10 Digital Camera ?
I have a Nikon COOLPIX L10 Digital Camera and flash is not working in any mode.i changed batteries but it still not working.please help.
😍52% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/en/65-crystalography.html Add another dimension to your photography with the CrystaloGraphy Pro ✅ Makes the PERFECT gift! The CrystaloGraphy works with 📷 : all cameras 📱: all smartphones. ➡ sellerscity.net/en/65-crystalography.htmlPosted by SellersCity on Saturday, April 28, 2018
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Change Batteries....? Hi there, I have owned the Canon A 95 for almost 2 years now. Since a couple of weeks back its not been working at all. It keeps saying "Change Batteries" even after i put in a new set of batteries. After a few seconds of turning it on, it says Change Batteries and shuts off. Triedputting in new batteris a few times but still no luck. Any help would be highly appreciated!
Ok.. did you guys try a reset? Just remove the batteries, wait for 60 seconds then put them back in.. that should reset the camera.. ... Canon PowerShot A95 Digital Camera
My canon rebel xti will not turn on. I have replaced all the batteries, and still nothing starts up. I've been tried to cleaned up the battery slot and change the battery with the new one, but still not work. anybody can help me? thx a lot
Such symptom indicate a malfunction o the DC/DC voltage converter circuitry, and the camera has two of them located in different boards.\015\012\015\012In order to perform a correct diagnostics and repair of it, it is necessary to open su ... Canon EOS 400D / Rebel XTi Digital Camera
Camera seemed to be working fine..got lots of pics..seemed to have stop taking photos a couple days before I picked it up..lost correct time and date so figured batteries were dead. Changed batteries and wont turn on! Took batteries out and repositioned made sure in correct and still wont turn on! Please help
... Moultrie GameSpy 4.0 Digital Camera Deluxe
My cannon powershot a40 wont stay on, when I turn it on it says "change the batteries" then shuts off (even though I have it plugged into the wall. when I put batteries in it, it still doesn't work... please help!
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Canon PowerShot A40 Digital Camera
My camera turns on for 1 second and then it turns back off at first I had rechargeable batteries in it and I thought that it was the batteries that wasnt working and then I changed them again, and my camera still does the same thing..Can anyone Help Me??
Only use hight power battres in your camera but it could be a fult inside the camera too it will shut down if the batterys are low it may also be a bit damp ... Kodak EasyShare C433 Digital Camera
My cannon A570 was working fine. Then all of a sudden it would turn on and turn off right away so I changed the batteries. This did not help. The lens was opening very slowly. Then it wouldn't open again. I received a change battery message which was odd but changed the batteries again. (they were pretty hot) Once I changed them it worked again for a second but now it wont turn on. Any suggestions?
... Canon PowerShot SX100 IS Digital Camera
I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju
Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
We have a vtech kidizoom camera and the screen is blue. We have changed the batteries - but the screen is still blue. What could be the problem - it seems the rest of the camera is working fine - you just can't see the screen. Help???
Hi! Pretty much an lcd problem that will surely require replacement. ... Vtech Kidizoom Digital Camera
I have a Nikon COOLPIX L10 Digital Camera and flash is not working in any mode.i changed batteries but it still not working.please help.
There is a possibility of flash bulb is not functional. or it may happen due to connection between flash lamp and battery has disturb.... So best way is to get it serviced...... ... Nikon COOLPIX L10 Digital Camera
My Canon Powershot SX100 IS is not switching on, dont know for what reasons. I changed new batteries, still not working. Pls help!
Things to check first for a camera that won't turn on are battery contact points, and micro switches that are located on the battery and memory card doors. Troubleshooting tips on other things that need to be checked ... Canon PowerShot SX100 IS Digital Camera
I have a pentax espio 200 the error code ep appeared then it stopped working I changed the battery but still no response could you please help
Replaced camera with a new one thanks anyway ... Pentax Digital Cameras
CCD-TR6 What if the tape door won't open, you changed the battery and it opened once, never again. CCD-TR33 I can get this one to work, but all the tapes have a static line through the middle. I took an unused still in package, but old tape and recorded and it has the same, is this the camera or the tape? Thanks for any help you can give. Esther
... Digital Cameras
No screen my camers has a black screen and when i take a picture ni picture appears. ive changed the batteries three times and still no screen...but when i turn it on the hp screen shows up so i know the screen works. help...
This is an internal failure and the camera has dies.\015\012HP support will advise- depending on age of camera whether they replace it or you buy another ... HP Photosmart E217 Digital Camera
Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i
Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
Nikon COOLPIX S710 stops working after battery and/or memory card are removed. I have reformed the memory card (no change). Purchased 2X new batteries (no change). One of the original batteries will allow the camera to work, directly after a fresh charge, but not after it is removed, unless directly after insertion from being freshly charged. Have checked all 4 different batteries and voltages all appear at of above specified 3.7 VDC. Still only one of the 4 will ever allow the camera to functio
A voltage test alone cannot determine if the battery is good unless you can have the current rating of the battery tested. So if the camera comes on after a charge it seems that the battery is not retaining current for the camera to boot on.\01 ... Nikon COOLPIX S710 Digital Camera
Hi, I have a Nikon D300. First problem - The battery started showing empty / full / then empty again. Bought a new battery, worked first time, then the same problem empty / full / empty. Change the camera, kept the 2 batteries and charger. First time I tried to use the 2nd camera, both batteries showed empty. Change the batteries and charger. Charged the two batteries but still show empty! What do I do next?
A capaciter in your camera is not working properly and is discharging your battery even when the camera is turned off (this is a cheap problem to fix but must be sent back to NIkon for repair ... Digital Cameras
Canon SD600 wont turn on???? Changed battery and still dont work
... Canon PowerShot SD600 Digital Camera
Won't work Have a C875 for a year now, and it has been working just fine. The other day I decided to try a AC adapter on it. Well, the AC adapter I used is one of those variable voltage ones. I set the voltage for 3 volts, plugged it in, it doesn't work. O.K. I put the batteries back in, still don't work. And, to top it off, the batteries get hot. Took the camera apart and I don't see anything burned up. Lost. Any help on what the solution could be and how to fix it would be greatly appreciated.
Oh no maybe you used different adaptor some adaptor have reverse polarity. check the adaptor before plugging it..if you using variable voltage set to 3v then adjust also the polarity. the polarity should match the polarity of your camera. ... Kodak EasyShare C875 Digital Camera
Zoom Error Hi all, New to site and hope you can help me! I have a Fuji S3000 that has worked very well for last couple of years and all of sudden has packed up, coming up with "zoom error" when you turn it on. I have done the obvious (change the batteries) but to no avail. Any ideas. I have recently been to the North Pole with this camera and it worked perfectly well at -40 degrees (after warming the batteries!) and has only worked for a day since returning!
I had this problem with my Fujifilm E900 under warranty, and Fuji replaced the zoom mechanism. Nine months later, this past weekend, the same problem occurred. I appear to have solved it by gently but persistently wiggling the lens into a fully zoome ... Fuji FinePix S3000 Digital Camera
Whenever I put new batteries into my Canon Powershot A480, I get the same thing - I get the 'Low Battery' red flashing light. And Then as I go to take a picture it shuts off and says ; Change The Batties. I've gone through packs and packs of brand new batteries and still the same thing. I've resetted it, and still.. nothing. Please help !
I've got the same problem with 2 A 480 canon. I put in NiMH batteries and they work fine. If you put in slightly drained used batteries they work!! Nimh batteries are 1.2 volts and Alkaline are 1.5 volts. There is definitly a problem with thi ... Canon PowerShot A480 Digital Camera
The camera that I have is an red HP A730 with 7 megapixels. I've had it for about 3 years and it's always worked just fine. But, recently I lost my memory card. My camera still worked with out it. Anyway, the other day I tried to turn my camera on and it didn't work for some reason. I thought it was the batteries, so I changed them, but the light indicating that it's on flashed for a second and then turned off. Now, even though I'm using new batteries, my camera will not turn on. I will admit, I
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\012\01 ... Digital Cameras
Hi i have a nicon d70 it was working fine when taking photo's on saterday went to change lens from sigma 28-70 to sigma to sigma 75-300 and it came up with error code R07 and noththing worked changed back to origanal len's and still noththing works, i'v tried everything i know (which is't a lot) even pushed reset button hope someone can help, Cheers Bob
Have you tried formating the memory card? R07 means it has 7 shots in internal memory. Since you have already pressed the reset through the small hole in the front, if formatting the card does not work, try downloading the latest firmware from Nikon ... Nikon D70s Digital Camera
No matter what I do, my camera keeps giving me a "Battery Depleted" message whenever I try to turn it on. It's a Pentax Optio E40, and I've only had it a couple of weeks. It was working fine, but then one day when I tried to turn it on, I got this error. I replaced the batteries, but the error still came. I've checked the orientation of the batteries, tried re-inserting them, etc, but nothing seems to work. Please help! Thank you!
I had the same problem and checked the manual. If you haven't used the camera in a while and there were either no batteries or dead batteries in it, put in new batteries, keep it off, and WAIT a few minutes. Then try to turn it on. This helped with P ... Pentax Digital Cameras
PLEASE HELP why does my camera say low battery every time i try to put new batterys in the camera!!! they r the rite batterys and i try all different brands and it still wont work!!!!!!!!!!!!!!!! PLEASE HELP
DEFINATLEY KNOW THE ANSWER TO THISPROBLEM FOR SURE!!! IT IS BECASUE FRO SOME REASON OR ANOTHER THIS CAMERA ISNOT COMPATABLE WITH JUST THE REGULAR AA BATTERIES...YOU NEED TO BUY SPECIAL BATTERIES FOR DIGITAL CAMERAS...EX::LITHIUM, OR RECHARGEABLE BATT ... Samsung Digimax D53 Digital Camera
No power camera suddenly stopped working. recharged batteries no result, changed batteries still nopower tried batteries in different camera they worked perfect. camera has never been knocked or dropped,
Directly from Kodak's website:IMPORTANTWe recommend that you do not use alkaline batteries in EasyShare cameras because they may cause unexpected shutdowns and loss of pictures. ... Kodak EasyShare CX7300 Digital Camera