Having problems with your Pentax *ist D Digital Camera ?
Pictures a very overexposed. Inside I can shoot without a flash at 400 ISO and they come out right. Outside they turn white.
Also the shutter speed won't register. I can set it at 125 or even 500 and it comes out at about 1/30 or 1/60 of a second. Lower shutter speeds are actually lower. This happened a day after I cleaned my sensor. Could that be the problems?
😍52% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/en/65-crystalography.html Add another dimension to your photography with the CrystaloGraphy Pro ✅ Makes the PERFECT gift! The CrystaloGraphy works with 📷 : all cameras 📱: all smartphones. ➡ sellerscity.net/en/65-crystalography.htmlPosted by SellersCity on Saturday, April 28, 2018
Go back to your setup menus and set the Sensitivity to the lowest ISO value possible. Now set the White Balance to Auto. Exit the menus.
Now set the camera to P for program. In effect, you have turned the camera into a point-and-shoot dimwit. It should now take reasonably well exposed shots indoor and outdoor.
If the shutter speed does not register on the body, you should put the dial on Tv and see if you can alter the speeds. Remember, not all finctions are available for all dial settings.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Pictures a very overexposed. Inside I can shoot without a flash at 400 ISO and they come out right. Outside they turn white. Also the shutter speed won't register. I can set it at 125 or even 500 and it comes out at about 1/30 or 1/60 of a second. Lower shutter speeds are actually lower. This happened a day after I cleaned my sensor. Could that be the problems?
Have you set the 400 ISO, or do you have the camera on Auto ISO?\012\012\012Go back to your setup menus and set the Sensitivity to the lowest ISO value possible. Now set the White Balance to Auto. Exit the menus.Now set the camera t ... Pentax *ist D Digital Camera
When i press the Shutter release button with the flasher the Flash comes 1 or 2 seconds late
It is a Flash offset, resetting the settings to factory will bring it back to zero. ... Digital Cameras
Anti-shake problem My Konica Minolta 7D stopped taking pictures. It will still auto-focus, but nothing happens when you press the shutter button all the way down. The problem I experience is: 1. Shutter does not release. 2. When camera is powered up, after the initial lens shuffle a clicking sound is heard. 3. The auto shake bars (all five of them) to the right of the view finder are blinking 4. Show 0 (zero) as the number of frames remaining in the view finder. 5. The problem is intermitte
Symptom 1: referred to as FFB (Firts Frame Black). this is when you do not use the camera for a while and when you attempt to take the first snap shot, the Shutter is either stuck, or takes a blank/black picture (some cases the picture came out bluis ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera
I have recently noticed that the lense shutter takes ages to close. when i turn the camera on the lense zoom comes out without any problem but the shutter stayes closed for at least 10 seconds and then very slowly opens.
Looks like theres something stuck in the lens mechanism, some grit or dust or something. ... Panasonic Lumix DMC-FX7 Digital Camera
My DZ-MV730E is malfunctioning. I have TDK DVD-R 1-2x 1.4gb disc in. Took several short vidios in succession then screen said RUN DISC REPAIR. I did not have DC power cord to run disc repair so decided to eject disc and repair it later. PROBLEM: The camera does not eject disc. I put charged battery on, press disc eject button, the indicator light comes on once for a half a second, there is a faint "click" but no eject motor noise and the disc cover does not open. When I turn the camera ON, I
Hey there\015\012\015\012personal experience? try banging but i do notadvice this becuase this will damage your player. unfortunately, there is no simple way to fix your problem. it has to be done by an expert technician with hands-on ex ... Digital Cameras
I own a D90 and of late have had problem getting the shutter to actually fire and take a photo at times. It will work sometimes and not at others. I have tried changing the memory card - putting it on manual etc but still won't work. The battery is fully charged. It occasionally comes up with an r05 and r21 code in the R lower box and a flashing F at the top R when this seems to happen. I haven't played with the settings all that much - just since this has begun happening. Can you make any sugge
The r codes you mention are related to speeds of buffering information onto the memory card. A high ISO NR setting on the camera has a huge impact.... the cross over point is 800 ISO. If you have it on, and are on 800 or over, the remaining buffer ca ... Nikon Digital Cameras
Nikon D60 - Very slow shutter speed (2-4 seconds)when using the flash and pictures come our blurry. All settings are default and this is a new problem.
Turn the dial to P mode and do flash photography this should solve it. ... Nikon D60 Digital Camera with 18-55mm lens
Got error 99 on canon 1D MARK II. When I push the fire button I get the error message. I use nikon 24mm lens. I used it now for 2,5 years whitout any problem. When I remove the lens and push the fire button 1 time it works, the second time the error agian. Is it the shutter, the mirror, the lens?
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon EOS-1Ds Mark II Digital Camera
Powershot Pro 1 shutter problem
The whole thing is very complicated. In many of the new technologies, there are mechancal devices with very complicated electronics intigrated with them. \015\012\015\012Sometimes you can get different opinions, but until the job is done ... Canon PowerShot Pro1 Digital Camera
Occasionally while shooting in auto/portrait my shutter will stay open for 1 second or longer, for no reason
Have you tried to reset the camera and reboot the firmware? I had that problem with a friend's camera and it simply worked.\015\012\015\012Other thing is: are you using the original battery or a third party battery? sometimes bad quality batter ... Canon EOS 40D Digital Camera
Lens Problem I got a new Kodak EasyShare C613. The lens just won't go in and it shows lens errors 10e,1,0,0 and 20e,1,0,0.There was no mechanical shock imparted whatsoever.I was trying a SanDisk SD card. The lens opened and it just won't go in. Please help. I got the camera shipped from the U.S so even warranty won't work.
Okay, Kodak is a load of **** if they won't allow warranty on an item that doesn't retract. And I got an SanDisk SD Card like you, and on most of my pictures it says, "FILE FORMAT UNRECOGNIZABLE." You should Email Kodak and talk to them about that wa ... Kodak EasyShare C613 Digital Camera
I have a Kodak EasyShare C143 serial number KCGMU03223587 and this is my second one since August of this year. I had the same problem with both. The first one I was able to exchange, but the second one I can't since I haven't been able to find my receipt for it. The problem is I go to turn on the camera and the lens goes out so far and that is it. No screen or anything. If the screen does happen to come on it is on for like 2 seconds and it goes off. I take the batteries out and exchange them wi
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak Digital Cameras
Camera Hi, I have a Kodak EasyShare LS443 and the Camera Shutter keeps getting stuck. As far as i know there are no other problems because it worked fine and then the shutter became a problem. It sounds as though the lens is trying to come out and then the camera turns itself off. Have you a solution for this problem.
Hi\015\012try turning the camera on while its trying to move the shutter\015\012HELP it! just push the shutter to its place...\015\012idont push it to hard or you will make it worse\015\012if that wont work \015\012while starting it up give it a litt ... Kodak EasyShare LS443 Digital Camera
LENSE ERROR 122,1,0,0 problem
Hershey, take a small pair of needle nose pliers and try and wiggle the lens and it should work! I just did it with my daughters camara\015\012(Same camara, same error message) Good luck!! ... Kodak Easyshare M753 Digital Camera
I have a Kodak Easyshare P880 camera where the power intermittently cuts out and then comes back on after a second. When the power cuts out, it is accompanied by an audible click, the screen goes black, and the power light blinks off, then comes back. This happens every 30 seconds or so. Is there a fix for this? What is the cause of this problem?
... Kodak EasyShare P880 Digital Camera
When i turn on my camera(md853)the screen reads "lens error 1 of 1,0,0"what s the problem?
Try these procedures. ... Kodak EasyShare M853 Digital Camera
When pressing the power button, the shutter opens, the lens comes out, the screen comes on for about 2 seconds. Then the screen turns off, the lens goes back in, but the shutter stays open. I let someone use it and this is the condition it was returned in. I'm not sure if it was dropped or anything, but I don't see any external damage.
Look closely for sand particles that may be lodged around the gaps of the lens barrel. Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or th ... Kodak Easyshare C182 12MP Digital Camera
My kodak easyshare c813 will not turn on. it says on the screen lens error 111,1,0,0 and 221,0,0,0. how do i solve this problem? please help
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Kodak Easyshare C813 Digital Camera
I bought a second hand d70s. it seems to have a problem. the shutter release button does not seem to do anything when pressed half way (like auto focus). I can only get autofocus to work if i program AE-L/AF-L button to AF-ON. I press the AE-L/AF-L button on the back, then press the shutter to take the shot. And if i set the AE Lock On, pressing the shutter button half way does not lock the exposure setting. so there seems to be an issue with the shutter button itself...is there an easy fi
You need to press the button half-way first to allow an exposure reading to lock on to. ... Nikon D70s Digital Camera
Well my camera is a Samsung PL150 which I purchased from Dubai airport April this year the problems are 1. when its been fully charged it just doesn?t come on it just refuses to come on so I have to charge it again but the green light shows which means its fully charged and still it doesn?t come on I just really don?t know what to do the other one is When I try and charge my camera the red light shows which means its charging but then changes in to a flashing amber light now I searched everyt
... Samsung SL202 Digital Camera
Haye, sir i m use of nikon coolpix 4600. but yesterday is problem have show in the screen system error 1 0. and no working camera so what's problem in the camera.plz solve the problem. thank you.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Nikon Coolpix 4600 Digital Camera
Focusing problems Hello, I have been trying to take close-up pictures (between 4-12 inches away from subject) but when I press the shutter button halfway, on the screen I see the image come into focus, come out of focus, come into focus,.. on and on for several moments until it settles on the out of focus image. I've tried setting the camera to the macro and super macro settings, and that doesn't help at all. I know it can focus, because I see it on the screen but for some reason it chooses the
You may be beyond (up to close) the focal capability of the lens. Even though there is a macro setting, the lens may not have the capability to focus on an object that close (without adding an external macro lens). The specification on the minimal ... Olympus SP-350 Digital Camera
Have a 20 month Optio E 40, today tried to switch on, lens woundnt come out, used the manual and switched on while holding arrow button, Playback piture showed in display, pressed half shutter to switch back and error message Lens error 113,0,0,0 appeared, Pentax want £80.00 minimum to look at it, can you help pleaseregards Terry
Try to take out the battery and put it back in. ... Digital Cameras
Shutter sticks I have a older Rebel 300. It has worked great for years but the shutter is sticking. When you press the shutter the light will flash for several seconds, then take the pic, which by then is to late and ruined. Has anyone had this problem before ?
Does the light flash for 10 seconds, with a series of beeps getting faster before the picture is taken so you miss the shot, or are you saying the shutter stays open for several seconds giving you a whiteout picture?If the former, then th ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens
I hit the power button and it turns green for a second but then goes out. The camera and LCD screen do nothing. So I have some sort of power problem. When I put the battery in the charger the charger light comes on for about a 10seconds but then goes out (suggesting that the battery is fully charged). Is this a battery problem (not charging or holding a charge) or a camera problem? I don't want to buy a new battery if the camera itself is dead... Thanks!
Hi i have struggled with this within few months of buying the camera.\015\012Both the charger and camera are not making a good connection with the battery. i clean with alcohol, this usually helps with the charger. When powering up in camera i ... Sony Cyber-shot DSC-W120 Digital Camera