Having problems with your Pentax K100D Digital Camera ?
Camera reverts always to 2006 date when power turned off
\015 The display upon the camera being turned off always reverts to the initial date 2006\015
Hi There. 1st go to menu Then Go To Memory Then select Flash. This will hold the date when taking the battery out.\015\012Av A Good Weekend\015\012Regards Alex
Repair Help & Product Troubleshooting for Pentax K100D Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Camera reverts always to 2006 date when power turned off
Hi There. 1st go to menu Then Go To Memory Then select Flash. This will hold the date when taking the battery out.\015\012Av A Good Weekend\015\012Regards Alex ... Pentax K100D Digital Camera
Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.
I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera
When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.
Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera
Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.
... Canon PowerShot S400 / IXUS 400 Digital Camera
I have a Kodak ZD 710. Using rechargeable NiMH. Was taking a photo of a shiny surface towards the sun in 86 degree weather. Took 2 good shots when suddenly camera shut off. I turned it back on but it shut off again. Turned it on again and screen wanted me to change date format and then immediately shut off again. Next it would not turn on at all, no power. I changed batteries. Still no power. Removed batteries and 4 Gb memory card for several hours. reinstalled but still no power. Today is
Is the lens still sticking out? It usually retracts when it turns off. let me know ... Digital Cameras
The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.
... Olympus Stylus 770 SW Digital Camera
Power cycling My T1 sarted turning itself off and on while in the cradle. I was downloading pics to my PC. Power to the cradle is not connected. Only the USB cable. Also, it appears that openning or closing the lens cover is not always turning the camera on and off as it should. Power shows 45 min left. I have removed the battery and it looks OK. Contacts appear clean.
This seems to be a circuit fault\015\012check the manual[Full manual on the software CD in PDF]\015\012And look for any fault indicators.\015\012If no sign then the manufacturers Support\015\012If it is 'young camera' it may be replaced.\015\012But ... Sony Cyber-Shot DSC-T1 Digital Camera
When i turn camera on get blue screen that has date and time than in black letters i get lens error 221,0,0,0 and camera goes off
Hi there please follow the steps and let me know the result.\012\0121. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.\012\0122. Look carefully between the lens and the camera bo ... Kodak EasyShare C613 Digital Camera
We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(
Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera
Everytime I turn the camera on, it's asks to set the time/date. No matter how many times I HAVE set it, it always comes on again. So to use the camera I have to always go thru the "do you want to set the date stuff" first.
---- This is a problem many Coolpix S710 owners have had and many have had a defective internal battery (it keeps the time and date). To see if yours is defective, fully charge the main battery, put it in the camera and let it set with the power butt ... Nikon COOLPIX S710 Digital Camera
What happened? Once i open the camera,it will appear this,,"turn the power off and on again" i cannot use and click take a picture.But i can still view all the pictures i had taken before.Only the prob is when i open the cam it always say turn the power off and on again.WHat is the problem of this?Can i fix this by your instruction?IS this already broke and no chance to fix it anymore? thank you..
Hi, \012 \012 Error: TURN ... Sony Cyber-shot DSC-W55 Digital Camera
My canon powershot only powers on in playback mode. when i try to power up in camera or video mode, the camera's lens tries to retract but only for a split second and always returns . I have bo video or audio CAPTURE only turns on for playback.. I do not wish to purchiss another camere and Id like to use my 4 GIG
... Digital Cameras
Beeping This is my daughters camera she got it for christmas last year, it worked fine until a couple of months ago. When you push the power button with rechargeable batteries in it ... it starts up but then the screen flashes to Low Battery and then it starts beeping and wont stop until you take out the batteries. We have tried other batteries and with those the camera wont even turn on. Please help me because she loves this camera and is always sneaking it into school with her.
Thanks Toniapaytons, ur the best. I thought I had broken the thing, and it was my parents that I bought for them for their anniv. I had borrowed it. Shew!!!! your right we were just buying regular disposable. Thank you thank ... Samsung Digimax D53 Digital Camera
I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks
Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera
When I turn on camera it always shows on the display that I have to check out time and date. I believe that the problem is with inner battery but i cant open camera to look inside.
You are right for that, carefully find out how to open it, be carefull while opening, be inthusiastic, you cant do anything if you afraid of,, ... Digital Cameras
Fuji finepix a400 camera. When I power it on I get the 'date/time not set message'. I can set the date / time and all in well until it is turned off overnight. It has new batteries installed and I get this message even with an external power supply attached. This is most annoying.
I would suggest going to the fuji website to download the latest firmware driver and update the firmware on the camera. ... Digital Cameras
I have a Sony Cybershot DSC-P92 and it always has been working properly untill today. When I inserted a fresh pair of charged batteries the powerlight immediatly comes on, even before I turned the camera on. When I press the powerbutton and the camera starts I have to re-set the date, which is odd. After that done and ready for use the flash doesn't go off and it starts beeping and displays an error message: E:91.01 Is this problem fixable or should I throw it out of the window (metaforica
Haven't I wanted to Throw it out the window before as well. That was a good chuckle but no you don't need to do that, what's happened is that the internal battery the one that keep the day date time and anything else programed into the camera alive w ... Sony Cyber-Shot DSC-P92 Digital Camera
I dropped my camera while the lens was out and now it will not go back in, it makes a clicky noise when i turn on the power and lens error 101,1,0,0 show up, please help
That will be a mechanical problem and the camera is in a need of a repair.\015\012Since you dropped the camera it is now Out of Warranty. The repair of this model for this fault is about 48 pounds + shipping. KODAK also offers a Trade up ... Kodak Easyshare M753 Digital Camera
Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.
Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera
Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk
You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera
My camera problem is :when i start or turn on the power button of camera a massage is displayed which is "Turn off the power and on again " i followed the same but again when i am turning the power on again ,same massage is being displayed in camera . camera model is :SONY DSC-W180 cyber shot please help me out soon.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W180 Digital Camera
When I power up the camera the lens opens and immediately retracts and the camera shuts off. I've attempted to push every button while turning on the camera to no avail. I also held onto the lens when it opened. Though the lens remained extended, the camera powered off. When I turned it back on the lens retracted and the camera powered off.
Have you made sure that the batteries are LiIon and fully charged? I had a similar problem with a Kodak Easyshare camera that required the higher voltage LiIon battery pack rather than alkaline AAs which will fit in there but is not exactly right. ... Kodak EASYSHARE M763 Digital Camera
Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.
The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera
Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera
My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?
\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera