Having problems with your Pentax Optio M60 Digital Camera ?
Lense will not stay out. When you turn the camera on the lense comes oot then goes straight back in and camera turns off. The battery is fully charged.
😍52% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/en/65-crystalography.html Add another dimension to your photography with the CrystaloGraphy Pro ✅ Makes the PERFECT gift! The CrystaloGraphy works with 📷 : all cameras 📱: all smartphones. ➡ sellerscity.net/en/65-crystalography.htmlPosted by SellersCity on Saturday, April 28, 2018
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Lense will not stay out. When you turn the camera on the lense comes oot then goes straight back in and camera turns off. The battery is fully charged.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Pentax Optio M60 Digital Camera
The battery is fully charged, when I turn the camera on the lense will come out lights on the camera come on for a second then everything goes off,lense goes back in.If I take the battery out for a minute then put it back in it lets me set the date then shuts off.
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: r ... Digital Cameras
Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera
I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.
Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera
The battery is completely charged, but when i go to turn on the camera, it turns on for a split secong then shuts off. The lense is stuck out fully and won't go back in because the camera turns off so fast. Seems to be the battery, but it is completely charged.
If the battery is old it might need replaced even though it says its fukky charged! ... Digital Cameras
Problem for Polaroid 1533 Digital Camera The battery is fresh and fully charged but still the camera wont turn on. Ehen we try to turn on the camera, it blinks with green but then turn off the camera. There are chances that we can turn on the camera but when we try to off it and then afterwards use it again, it goes back with the problem of not turning on.
... Polaroid I533P Digital Camera
While filming the camera just stopped and turned off but the lense was still on. ithought it was the battery so fully charged the battery but camera won't turn back on :(
Most of the time this is from loose screws inside the camera that cause a short and leave the camera useless with a no power problem. For help with this, you'll need to have it fixed which generally requires a part be replaced. Try this site: www.c ... Canon PowerShot G9 Digital Camera
Only about 9 months after buying my camera, It wouldn't turn on. I'll plug it in and the light will come on that it's charging, but when I got to turn it on, it turns on for a split second (and the zoom lense comes out) and then it turns itself right back off (and the zoom lense goes in). I thought that it needed a new battery so I bought one and it's still doing the same thing. I emailed Kodak and they said that I should just send it into them for a $60 repair fee...lame. Any suggestions?
If its only been 9 months since you bought it shouldn't it be covered for repair? espically if its a manufactures fault,which it sounds like. ... Kodak EasyShare M863 Digital Camera
My Kodak V1233, isn't working right. If I turn it on, it will only turn on a second and extend the lense and then shuts off (it's fully charged). I can eventually get to take pictures, if I start by hitting the favorite button, and then the camcorder button and then quickly hitting the the camera button. I can take pictures, but can't see them, I only see a black screen. The camera will not power off this way. If I take the battery out, and then put it back in, and hit the favorite button,
I have had the exact same problem this seems to be a common flaw in this model i do not suggest any one purchase the V1233 ... Kodak EasyShare V1233 Digital Camera
Sanyo vpc-e760 Sometimes when i put my battery from my camera on charge the light turns red like it's charging, sometimes it just stays green. Can't figure out why. 9 out of 10 times that i put the battery back in my camera the camera won't turn on. it won't do anything. is it the camera it's self or is it the battery. if i hook the charger cord straight into the camera it will turn on..
... Vivitar ViviCam 3930 Digital Camera
I hit the power button and it turns green for a second but then goes out. The camera and LCD screen do nothing. So I have some sort of power problem. When I put the battery in the charger the charger light comes on for about a 10seconds but then goes out (suggesting that the battery is fully charged). Is this a battery problem (not charging or holding a charge) or a camera problem? I don't want to buy a new battery if the camera itself is dead... Thanks!
Hi i have struggled with this within few months of buying the camera.\015\012Both the charger and camera are not making a good connection with the battery. i clean with alcohol, this usually helps with the charger. When powering up in camera i ... Sony Cyber-shot DSC-W120 Digital Camera
I have a fully charged battery and I turn the camera on and all of a sudden I cannot get a display on the screen. It gets a few purple waves, but goes back to a black screen. I have it in camera mode and the original settings i had the camera in when i took pictures, which came out very nice. I saved all my photo's to my computer to see if maybe i filled the memory stick, but still no luck... -Sandy
The display is probably bad - it can be replaced. Try taking a picture and download the results on a computer - if it's ok, then that confirms a bad display. The camera is still usable but with a bad display viewer. ... Sony Cyber-Shot DSC-T1 Digital Camera
Battery Problem When fully charged the camera will work for a few hours. It can be switched off annd back on again and will run with no little loss of charge after 8 hours or so. If a fully charged battery is fitted but is not turned on the camera will not even switch on after about 15 hours - the battery is totally run down. New batteries have been used but no difference is found. This has happened from new. It was returned to Nikon UK's service department with a covering letter trying to
Sorry this isn't a solution, but I wish my 8700 would last even as long as yours does.\015\012\015\0122 hours, period. on or off, taking pictures or not, two hours & it's a stone dead battery.\015\012\015\012Just on the off chance it will help I'm ab ... Nikon Coolpix 8700 Digital Camera
My camera turns on and shuts off right away, the lens comes outand the screen does it's opening casio thing and the green light is flashing then all of a sudden the screen goes black and the lens goes back in, i fully charged the battery and still get the same thing happening!
... Casio Exilim Card EX-S100 Digital Camera
EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help
You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera
After every picture I take the screen goes black for a couple of minutes so I cant take more than one photo at a time. I have to power the camera off and turn it back on to take a second pic. The battery is fully charged and the camera is fairly new and lightly used. Any idea how to correct the problem?
Are you using a cheap card? Is the card full with a large number of pictures? ... Nikon COOLPIX S10 Digital Camera
I have a svp xthinn-8363 gigi camera, the battery is fully charged but when i turn it on the lens comes out then goes straight in and the camera shuts off, this happens with or without the sd card inserted
It is an internal fault. The main board isn't recognizing something, you have a surge, and/or a sensor in the camera is bad. You need a camera repair shop to have a look at it as it is hard to narrow down these things. Get a quote first before going ... Digital Cameras
I have a Kodak EasyShare MD41. I received it last Christmas, I have not used it much but when I went to use it I thought the battery was dead cos it wouldnt turn on. I have fully charged the camera but it still will not turn on. the zoom pops out but then goes back in again. Can you help please. Judy Paterson
Your camera has a lens error. This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer ... Kodak EasyShare One Digital Camera
I purchased a Fujifilm finepix Z20fd camera from target last december. About a month ago, after putting a full charged battery into the camera I pushed the slider to turn it on and it would not come on. The battery charger tells me it is fully charged. After sliding the front back and forth a few times I left it in the "on" position and took out the battery and put it back in. It came on, but would not flash. Also I was able to close the slider, but the camera stayed on until I took out the
Have you tried putting your battery in different ways and did you push it in all the way to hear it click ... Fuji FinePix Z10fd Digital Camera
Batteries are fully charged. I can turn my camera on and look through my pictures, go through all the menus, etc., but as soon as I hit the button to take a picture, the camera just shuts off. I can immediately turn the camera back on, but it makes a strange clicking sound before it turns on. My lens is stuck out because even if I turn the camera on and turn it right back off manually, the lens does not retract. The camera was purchased in winter of '08 and I've had no problems whatsoever with i
Possible that the shutter or the focus mechanism is faulty and will need to be opened. Only if you are competent must you attempt to remove the camera as the mechansim and circuit will be delicate which needs experience. Ohter wise the best option is ... Digital Cameras
I have a Samsung camera that does not use batteries but charges on a wall charger. The batter is fully charged. I was scrolling through pictures when the screen just went blank. It will not take pictures and once turned on will not go back off without removing the rechargable battery. The camera will not take pictures or anything. It plays the startup music when turned on but thats it. The camera has not been dropped or damaged.
... Digital Cameras
I have a DSC-W50 that when the camera is turned on, the lense goes in and out a couple of times, there is "ACCESS" displayed on the screen, then it will shut off by it's self. The battery is fully charged. Any suggestions?
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W50 Digital Camera
I am able to transfer images to my computer, but when I try to turn the M893 camera on when it's not connected to my laptop, the screen comes on for a second or two, lens comes out, green light is on and then blinks and turns red and blinks and then lens goes back in and camera turns off. I've tried removing the battery, wiping it off, putting it back in, camera also wont charge. It's never gotten wet or been exposed to extreme heat
It has problem on the lens. Lens doesn't extend when transferring pictures that's why it works. Kodak cameras are designed to automatically shut-off when the lens is struggling to go in or out.Follow step-by-step solution and repair on ww ... Kodak Easyshare M893 Digital Camera
Zoom my camera isnt an olympus FE - 230 digital camera, its a kodak M836, i can look at my pictures okay, but i cant take any, as when i turn it on to take a picture the lens goes out, and then back it and it switches off. it is nothing to do with the battery as i have charged it several times. - my dad thinks that it goes back in because there is some sand inside (as we recently went on a beach holiday) and that the sand is stopping the zoom from coming out all the way, so it goes back in, alth
TIPS:1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!..to fix this... ... Olympus FE-230 Digital Camera
Lense stuck my kodak camera (the C663) is jammed in the outward position. its off and when i try to turn it back on it makes this wierd humming noise and turns back off. i tryed taking the batteries out charging them, nothing. i even tryed to turn it on then off quickly and tryed to help the lense back in.
... Kodak EasyShare C663 Digital Camera