Having problems with your Sony Cyber-Shot DSC-T1 Digital Camera ?
First my lens was stuck. After releasing it, the lens keeps coming out and going back in, Than gives an error message saying 'turn camera off and back on again' but this doesn't help. What to do?
😍52% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/en/65-crystalography.html Add another dimension to your photography with the CrystaloGraphy Pro ✅ Makes the PERFECT gift! The CrystaloGraphy works with 📷 : all cameras 📱: all smartphones. ➡ sellerscity.net/en/65-crystalography.htmlPosted by SellersCity on Saturday, April 28, 2018
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma
YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera
I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras
Lens Error Hi, When I turn on the camera, it says "Lens Error. Restart Camera." When you restart the camera, it gives you the same message. The Canon zoom lens will not go back into the camera. Help!
If you are sure that your battery is fully charged but still does not do any good, then do this little trick:1. Hold the camera on your right hand with the lens facing the ground.2. As you press the power on button, tap or hit ... Canon PowerShot A550 Digital Camera
There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message
OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras
First my lens was stuck. After releasing it, the lens keeps coming out and going back in, Than gives an error message saying 'turn camera off and back on again' but this doesn't help. What to do?
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-Shot DSC-T1 Digital Camera
Hi I have a Panansonic Lumix - DMC-FS25. My camera has now developed a fault with the lens which won't go back in. When I turn it on the lens zooms all the way out and then back in again and a message appears saying - System Error (Zoom). Any help would be greatly appreciated, Many thanks Graham
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ20 Digital Camera
When i turn on, it says lens error, restart camera - i"ve turned the camera on and off several times and nothing happens, the error message continues to show. I've taken the battery out and put back in but nothing helps. is this fixable?
Try one of these two fixes, if they dont work for you follow the link below for further troubleshooting.http://camerarepair.blogspo ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera
Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera
\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc" uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras
My camera was dropped in water and now it giving me the error message that says that i have a lens error. And the lens clicks when it is turned on then it cuts back off HELP
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... GE A730 Digital Camera
I took my camera to the beach, took a picture and put it back in my bag. I then took the camera back out to take another picture the lens extended but then it went back in again it went to go back out but stopped and a loud beeping noise started and a message saying lens error restart camera. I don't know how to restart the camera and if that means turning it of then on it still doesn't work. What can I do now?
If your camera went into "standby" mode, the lens retracted and you may have thought it was off. You put it into the bag and slight pressure on a button reactivated it and the lens tried to come out but may have been prevented by something in the bag ... Canon PowerShot A480 Digital Camera
Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks.
Try the procedures in this tip. ... Canon PowerShot SD750 / IXUS 75 Digital Camera
Help!!! i dropped my Nikong Coolpix L11 camera on the pavement. The lens got dented in, so naturally i popped it back to its normal place i turned it on and it worked for about 30 seconds and then popped but with the image that said "Lens Error". So i turned it off then turned it back on and it did the same thing. It did that for about 10 minutes and now as soon as i turned it on it says "Lens Error". I cant figure out how to fix it, i've tried slightly tapping it against my desk, i've tried hol
Hellothere are tiny plastic gears inside and may have chipped or a small piece of sand got in causing the lens to jamb. "very fragile"one solution is to ask a camera repair shop how much a lens mechanism would be to replace. ( ... Nikon Coolpix L11 Digital Camera
Hello. I have a Sony DSC-W80 When you switch it on the lens comes out but goes back in 3 times before a message appears on the screen saying turn off & on again still doesnt work. Can anyone help. Thanks
Problem in lens unit repair or replace it ... Sony Cyber-shot DSC-W80 Digital Camera
Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on
Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera
Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.
*&%[email protected]#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera
HELP ME my Lumix DMC-FX8 lens wont go back into the camera and will only allow me to preview my pictures ...Please I am in Hawaii right now and the lens is stuck out and wont go in and it says Turn off and turn on camera again ....PLEASE Please someone help me
I read the previous answer, as I have exactly the same problem. So I decided the camera was dead. Having done this I resetted it via the menu - settings - reset. Then I turned it off and smashed it really hard against a flat surface three or four tim ... Panasonic Lumix DMC-FX8 Digital Camera
The lens on my sd600 won't open when I turn the camera to picture taking position. Screen goes black and message says ''lens error, restart camera''. I have to go back to view mode and then turn camera off and on again in order for partially opened lens to retract fully and close.
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD600 Digital Camera
This Sucks! My camera is new, I went to use it...actually for something I saw that was hillariious...and I turned it on, the lens came out...it was zoomed all the way, and I could'nt take the pic nor could I adjust the zoom. Then I got this hateful message to turn camera off then on again, which I did. Now the lens does not return apon turning the power off, but does retract and come back out when I turn it on...and then the same scenario! Help Please!!!!!!!
I think this is just a hardware malfunction(some mech. switch) because, i have a lz7 and when i deliberately open the battery case with the camera power on it obviously switches off and then when u close the battery case either with the power on or o ... Panasonic Lumix DMC-LZ7 Digital Camera
I have a cannon camera, my boyfriend dropped it with the lens extended and now whenever I try to turn it on I get a message saying that there is a lens error and the camera will shut down. I have tried a couple of answers on this website, but most have to do with a lens that is stuck out, mine will still retract back and forth if you smack it on your hand. My problem is when you power it off and back on the error shows up and the lens will not extend then. Any suggestions are greatly appreciate
... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
My Nikon coolpix S10 camera was dropped and now the screen only says "lens error". If it is not touched the function returns to normal (has done so twice), but now the screen only say that one message and you can't turn it off or do anything). When it was turned off again and then turned on after a series of clicking noise the screen only said "lens error" and does not allow any other options(even turning off). Any helpful ideas would be apprecited. Thank you!
Hi,try this out it worked for most of them who had a similar problem like urs:Gently tap it twice at the end of the camera to ur plam and it will work again.just tap it very lightly against the bottom of the camera holdi ... Digital Cameras
When turning on the camera a message comes up reading " Turn the power off and on again" and the lens seems to be struggling to open. When I turn off the camera & then back on the same message comes up everytime, please help !
Have you tryed brand new battertys ... Sony Cyber-shot DSC-W170 Digital Camera
When I turn on my camera, It tells me Lens error and that I should restart my camera. Don't know how to restart it except turn it off and I get the same message. The lens doesn't go back in when I turn it off. Pleasr help. I have a wedding this weekend thank you sue
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon Powershot A2000 IS Digital Camera
Lens Sticking My daughter has this camera and the lens is stuck out and will not retract. When she turns the power on ACCESS comes on the screen and says to turn the camera off and then back on, but the lens never retracts. How can I fix this? Thank you for ANY help that you can provide me.
The same exact thing happened to me when I accidentally dropped my camera on the ground. My dad actually fixed it for me. I cannot exactly remember what he did, but I know this can be fixed! =]\015\012\015\012He did something with the len ... Sony Cyber-shot DSC-W55 Digital Camera
When I turn on my camera It tells me Lens error and that I should restart my camera. Don't know how to restart it except turn it off and I get the same message. The lens doesn't go back in when I turn it off. Pleasr help. I have a wedding this weekend thank you sue
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon Powershot A2000 IS Digital Camera
The entire zoom lens will not come out when I turn the camera on. It moves a little, makes a sound, and then my camera says turn off camera off and back on. I tried that several times and it is still not working. The battery is charged. I did go to the beach and wondering if sand got into the camera. I also cannot review my pictures as the message comes up about turning it off. What is the best solution?
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-TZ3 Digital Camera